Apple mac pro 8x User Manual
Have a look at the manual Apple mac pro 8x User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Mac Pro (8x) Upgrades — Bluetooth Card 161 Bluetooth Card Important: The computer enclosure includes one Bluetooth antenna wire, which looks similar to the AirPort antenna wires, except that it includes a “BT” label. If the label is missing, you can also identify the Bluetooth cable by its location; it is the cable that runs to the back of the computer. For proper operation, be careful not to connect the Bluetooth antenna wire to the AirPort card or any AirPort antenna wire to the Bluetooth card. Tools The only tool required for this procedure is a magnetized jewelers Phillips #1 screwdriver. Preliminary Steps Before you begin, open the computer, and lay it on its side with the access side facing up. Part Location
Mac Pro (8x) Upgrades — Bluetooth Card 162 Procedure Connect the Bluetooth antenna wire to the connector on the Bluetooth card. 1. Lower the card onto the Bluetooth connector on the logic board.2. Install the two Bluetooth card mounting screws. 3.
Mac Pro (8x) Upgrades — PCI Express/Graphics Card 16 3 PCI Express/Graphics Card The Mac Pro (8x) logic board includes one double-wide PCI Express graphics slot and three PCI Express expansion slots, for a total of four slots. The computer comes with a graphics card installed in slot 1. You can install additional PCI Express graphics and expansion cards in the remaining three PCI Express expansion slots. Important: Combined maximum power consumption for all four PCI Express slots must not exceed 300 W. Slot 1: Double-wide PCI Express graphics (graphics card installed) Slots 2–4: PCI Express Tools The only tool required for this procedure is a Phillips #1 screwdriver. Preliminary Steps Before you begin, open the computer, and lay it on its side with the access side facing up. Note: You may also find it helpful to remove the hard drives and carriers and any adjacent PCI Express cards before beginning this procedure.
Mac Pro (8x) Upgrades — PCI Express/Graphics Card 16 4 Part Location Procedure This procedure explains how to install a standard card and a card that includes a booster cable. Before you can install either type of card, however, you must first loosen the two captive screws that secure the PCI bracket to the enclosure and remove the bracket. You must also remove the port cover for the PCI slot where you are installing the new card.
Mac Pro (8x) Upgrades — PCI Express/Graphics Card 165 Warning: When installing or removing a card, handle it only by the edges. Do not touch its connectors or any of the components on the card. Standard Card Align the card’s connector with the expansion slot and press until the connector is inserted 1. all the way into the slot. If you’re installing a 12-inch card, make sure the card engages the appropriate slot in the PCI card guide. • Don’t rock the card from side to side; instead, press the card straight down into the slot. • Don’t force the card. If you meet a lot of resistance, pull the card out. Check the connector and the slot for damage or obstructions, then try inserting the card again. • Pull the card gently to see if it is properly connected. If it resists and stays in place and its gold connectors are barely visible, the card is connected. Replace the PCI bracket and tighten the two screws that secure it to the enclosure.2.
Mac Pro (8x) Upgrades — PCI Express/Graphics Card 166 Card with Booster Cable Connect the booster cable to the card. 1. Holding the card by the top corners, insert it straight down into its expansion slot. 2. Connect the booster cable to the logic board. 3. Note: There are two logic board connectors for booster cables. Connect the booster cable for a card in PCI slot 1 to the connector that is closest to the heatsink cover. Connect the booster cable for a card in PCI slot 2 to the connector closest to the media shelf.
© 2007 Apple Inc. All rights reserved. Service Source Views Mac Pro (8x)
Mac Pro (8x) Views — Exploded Views 168 Exploded Views Exploded View 1 Ambient Board 922-7732 Access Door 922-8004 Power Supply Fan 076-1232 Power Supply 661-4309 Optical Drive Carrie r 922-7729 Optical Drive 661-4276 Hard Drive 250 GB 661-4273 500 GB 661-4274 750 GB 661-4275 Hard Drive Carrie r 922-7728 Rear Fan 922-8031Memory Riser Card 922-7695 Front Fan 922-7999 Processor Heatsink Cover 922-8001 Graphics Card 661-3932 Heatsink 661-4332 AirPort Extreme Card 661-4060 Bluetooth Card 922-7289 Speaker 922-7998 Front Panel Board 922-7698 AirPort Antenna Board and Cables 076-1257 Enclosur e 922-8000 Logic Boar d 661-4307 Battery 922-6476 Bluetooth Antenna Boar d 922-7773 Power Button 076-1200 FB-DIMMS 512 MB 661-431 2 1 GB 661-4315 2 GB 661-4329 Processor 661-4308 Memory Cage 922-8058 Fibre Channel Card 661-4047 661-4048 661-4306 PS Cable Cover 922-8005
Mac Pro (8x) Views — Exploded Views 16 9 Exploded View 2 Hard Drive Harness Cable 922-7682 Hard Drive Te mperatur e Sensor Cable 922-7730 Optical Drive Power Cable 922-7684 Power Supply PS#1 Cabl e 922-8059 Power Suppl y PS#2 Cabl e 922-8060 Power Suppl y PS#3 922-8061 Power Suppl y Control PS#4 922-8030 Optical Drive Data Cable 922-7686 Front Panel Board Power Cable 922-7690 Front Panel Board Audio Cable 922-7692 Front Panel Board FireWire Cable 922-7691 Front Panel Board USB Cable 922-7693 Ambient Boar d Cabl e 922-7731
Mac Pro (8x) Views — External Views 170 External Views Front View Optical driveHeadphone jack Status light f ® Power button FireWire 400 port FireWire 800 port Second optical drive (optional) USB 2.0 ports (2)