Apple Ipad Pro Manual User Guide

							 Appendix A    Accessibility 151
Example 2: Let’s create the touch-and-hold gesture that you use to start rearranging icons on 
your Home screen. This time, on the gesture recording screen, hold down your finger in one spot 
until the recording progress bar reaches halfway, then lift your finger. Be careful not to move 
your finger while recording, or the gesture will be recorded as a drag. Tap Save, then name the 
gesture. To use the gesture, tap the AssistiveTouch menu button, then choose your gesture from 
Favorites. When the blue circle representing your touch appears, drag it over a Home screen icon 
and release.
If you record a sequence of taps or drags, they’re all played back at the same time. For example, 
using one finger or a stylus to record four separate, sequential taps at four locations on the 
screen creates a simultaneous four-finger tap.
Exit a menu without performing a gesture. Tap anywhere outside the menu. To return to the 
previous menu, tap the arrow in the middle of the menu.
Move the menu button. Drag it anywhere along the edge of the screen.
Adjust your accessory tracking speed. 
Go to Settings > General > Accessibility > 
AssistiveTouch > Touch speed.
Hide the menu button (with accessory attached). Go to Settings > General > Accessibility > 
AssistiveTouch > Always Show Menu.
Accessibility in OS X
Take advantage of the accessibility features in OS X when you use iTunes to sync information 
and content from your iTunes library to iPad. In the Finder, choose Help > Help Center (or Help > 
Mac Help in OS X Yosemite), then search for “accessibility.”
For more information about iPad and OS X accessibility features, go to 
www.apple.com/accessibility/. 
						

							B
  15 2
iPad in Business
iPad in the enterprise
With support for secure access to corporate networks, directories, and Microsoft Exchange, 
iPad is ready to go to work. For detailed information about using iPad in business, go to 
www.apple.com/ipad/business/.
Mail, Contacts, and Calendar
To use iPad with your work accounts, you need to know the settings your organization requires. 
If you received your iPad from your organization, the settings and apps you need might already 
be installed. If it’s your own iPad, your system administrator may provide you with the settings for 
you to enter, or have you connect to a mobile device management server that installs the settings 
and apps you should have.
Organizational settings and accounts are typically in configuration profiles. You might be asked to 
install a configuration profile that was sent to you in an email, or one that you need to download 
from a webpage. When you open the file, iPad asks for your permission to install the profile, and 
displays information about what it contains.
In most cases, when you install a configuration profile that sets up an account for you, some iPad 
settings can’t be changed. For example, your organization might turn on Auto-Lock and require 
you to set a passcode in order to protect the information in the accounts you access.
You can see your profiles in Settings > General > Profiles. If you delete a profile, all of the settings 
and accounts associated with the profile are also removed, including any custom apps your 
organization provided or had you download. If you need a passcode to remove a profile, contact 
your system administrator. 
Network access
A VPN (virtual private network) provides secure access over the Internet to private resources, 
such as your organization’s network. You may need to install a VPN app from the App Store 
that configures your iPad to access a particular network. Contact your system administrator for 
information about any apps and settings you need.
Apps
In addition to the built-in apps and the ones you get from the App Store, your organization 
may want you to have certain other apps. They might provide you with a pre-paid redemption 
code for the App Store. When you download an app using a redemption code, you own it, even 
though your organization purchased it for you.
Appendix 
						

							 Appendix B    iPad in Business 15 3
Your organization can also purchase App Store app licenses that are assigned to you for a period 
of time, but that the organization retains. You’ll be invited to participate in your organization’s 
program in order to access these apps. After you enroll with your Apple ID, you’re prompted to 
install these apps as they’re assigned to you. You can also find them in your Purchased list in the 
App Store. An app you receive this way is removed if the organization assigns it to someone else.
Your organization might also develop custom apps that aren’t in the App Store. You install 
them from a webpage or, if your organization uses mobile device management, you receive a 
notification asking you to install them over the air. These apps belong to your organization, and 
they may be removed or stop working if you delete a configuration profile or dissociate iPad 
from the mobile device management server. 
						

							C
  15 4
International Keyboards
Use international keyboards
International keyboards let you type text in many different languages, including Asian 
languages and languages written from right to left. For a list of supported keyboards, go to 
www.apple.com/ipad/, choose your iPad, click Tech Specs, then scroll to Languages.
Manage keyboards. 
Go to Settings > General > Keyboard > Keyboards.
 •Add a keyboard:  Tap Add New Keyboard, then choose a keyboard from the list. Repeat to add 
more keyboards.
 •Remove a keyboard:  Tap Edit, tap  next to the keyboard you want to remove, tap Delete, 
then tap Done.
 •Edit your keyboard list:  Tap Edit, drag  next to a keyboard to a new place in the list, then 
tap Done.
To enter text in a different language, switch keyboards.
Switch keyboards while typing. Touch and hold the Globe key 
 to show all your enabled 
keyboards. To choose a keyboard, slide your finger to the name of the keyboard, then release. The 
Globe key 
 appears only if you enable more than one keyboard.
You can also just tap . When you tap , the name of the newly activated keyboard appears 
briefly. Continue tapping to access other enabled keyboards.
Many keyboards provide letters, numbers, and symbols that aren’t visible on the keyboard.
Enter accented letters or other characters. Touch and hold the related letter, number, or symbol, 
then slide to choose a variant. For example:
 •On a Thai keyboard:  Choose native numbers by touching and holding the related 
Arabic number.
 •On a Chinese, Japanese, or Arabic keyboard:  Suggested characters or candidates appear at the 
top of the keyboard. Tap a candidate to enter it, or swipe left to see more candidates.
Use the extended suggested candidate list. Tap the up arrow on the right to view the full 
candidate list.
 •Scroll the list:  Swipe up or down.
 •Return to the short list:  Tap the down arrow.
When using certain Chinese or Japanese keyboards, you can create a shortcut for word and input 
pairs. The shortcut is added to your personal dictionary. When you type a shortcut while using a 
supported keyboard, the paired word or input is substituted for the shortcut. 
Appendix 
						

							 Appendix C    International Keyboards 15 5
Turn shortcuts on or off. Go to Settings > General > Keyboard > Shortcuts. Shortcuts are 
available for:
 •Simplified Chinese:  Pinyin
 •Traditional Chinese:  Pinyin and Zhuyin
 •Japanese:  Romaji and 50 Key
Reset your personal dictionary. 
Go to Settings > General > Reset > Reset Keyboard Dictionary. 
All custom words and shortcuts are deleted, and the keyboard dictionary returns to its 
default state.
Special input methods
You can use keyboards to enter some languages in different ways. A few examples are Chinese 
Cangjie and Wubihua, Japanese Kana, and Facemarks. You can also use your finger or a stylus to 
write Chinese characters on the screen.
Build Chinese characters from the component Cangjie keys. As you type, suggested 
characters appear. Tap a character to choose it, or continue typing up to five components to see 
more options.
Build Chinese Wubihua (stroke) characters. Use the keypad to build Chinese characters using 
up to five strokes, in the correct writing sequence: horizontal, vertical, left falling, right falling, and 
hook. For example, the Chinese character 圈 (circle) should begin with the vertical stroke  丨.
 •As you type, suggested Chinese characters appear (the most commonly used characters 
appear first). Tap a character to choose it.
 •If you’re not sure of the correct stroke, enter an asterisk (*). To see more character options, type 
another stroke, or scroll through the character list.
 •Tap the match key (匹配) to show only characters that match exactly what you typed.
Write Chinese characters. Write Chinese characters directly on the screen with your finger 
when Simplified or Traditional Chinese handwriting input is turned on. As you write character 
strokes, iPad recognizes them and shows matching characters in a list, with the closest match 
at the top. When you choose a character, its likely follow-on characters appear in the list as 
additional choices.
Matching characters
Matching characters  
						

							 Appendix C    International Keyboards 15 6
You can type some complex characters, such as 鱲 (part of the name for the Hong Kong 
International Airport), by writing two or more component characters in sequence. Tap the 
character to replace the characters you typed. Roman characters are also recognized.
Type Japanese kana. Use the Kana keypad to select syllables. For more syllable options, tap the 
arrow key and select another syllable or word from the window.
Type Japanese romaji. Use the Romaji keyboard to type syllables. Alternative choices appear 
along the top of the keyboard; tap one to type it. For more syllable options, drag the list to the 
left or tap the arrow key.
Type facemarks or emoticons. Use the Japanese Kana keyboard and tap the 
 key. Or you can:
 •Use the Japanese Romaji keyboard (QWERTY-Japanese layout):  Tap , then tap the  k ey.
 •Use the Chinese (Simplified or Traditional) Pinyin or ( Traditional) Zhuyin keyboard:  Tap , then 
tap the 
 k ey. 
						

							D
  15 7
Safety, handling, and support
Important safety information
WARNING:  Failure to follow these safety instructions could result in fire, electric shock, injury, or 
damage to iPad or other property. Read all the safety information below before using iPad.
Handling  Handle iPad with care. It is made of metal, glass, and plastic and has sensitive 
electronic components inside. iPad can be damaged if dropped, burned, punctured, or crushed, 
or if it comes in contact with liquid. Don’t use a damaged iPad, such as one with a cracked 
screen, as it may cause injury. If you’re concerned about scratching, consider using a case 
or cover.
Repairing  Don’t open iPad and don’t attempt to repair iPad yourself. Disassembling iPad may 
damage it or may cause injury to you. If iPad is damaged, malfunctions, or comes in contact with 
liquid, contact Apple or an Apple Authorized Service Provider. You can find more information 
about getting service at www.apple.com/support/ipad/repair/.
Battery  Don’t attempt to replace the iPad battery yourself—you may damage the battery, 
which could cause overheating and injury. The lithium-ion battery in iPad should be replaced 
only by Apple or an authorized service provider, and must be recycled or disposed of separately 
from household waste. Don’t incinerate the battery. For information about battery services and 
recycling, go to www.apple.com/batteries/service-and-recycling/.
Distraction  Using iPad in some circumstances may distract you and might cause a dangerous 
situation (for example, avoid using headphones while riding a bicycle and avoid texting while 
driving a car). Observe rules that prohibit or restrict the use of mobile devices or headphones.
Navigation  Maps, directions, Flyover, and location-based apps depend on data services. 
These data services are subject to change and may not be available in all areas, resulting in 
maps, directions, Flyover, or location-based information that may be unavailable, inaccurate, or 
incomplete. Some Maps features require Location Services. Compare the information provided 
on iPad to your surroundings and defer to posted signs to resolve any discrepancies. Do not use 
these services while performing activities that require your full attention. Always comply with 
posted signs and the laws and regulations in the areas where you are using iPad and always use 
common sense.
Appendix 
						

							 Appendix D    Safety, handling, and support 15 8
Charging  Charge iPad with the included USB cable and power adapter, or with other third-
party “Made for iPad” cables and power adapters that are compatible with USB 2.0 or later, or 
power adapters compliant with applicable country regulations and with one or more of the 
following standards: EN 301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another 
applicable mobile phone power adapter interoperability standard. An iPad Micro USB Adapter 
(available separately in some areas) or other adapter may be needed to connect iPad to some 
compatible power adapters. Only micro USB power adapters in certain regions that comply 
with applicable mobile device power adapter interoperability standards are compatible. Please 
contact the power adapter manufacturer to find out if your micro USB power adapter complies 
with these standards.
Using damaged cables or chargers, or charging when moisture is present, can cause fire, electric 
shock, injury, or damage to iPad or other property. When you use the Apple USB Power Adapter 
to charge iPad, make sure the USB cable is fully inserted into the power adapter before you plug 
the adapter into a power outlet.
Lightning cable and connector  Avoid prolonged skin contact with the connector when the 
Lightning to USB Cable is plugged into a power source because it may cause discomfort or 
injury. Sleeping or sitting on the Lightning connector should be avoided.
Prolonged heat exposure  iPad and its power adapter comply with applicable surface 
temperature standards and limits. However, even within these limits, sustained contact with 
warm surfaces for long periods of time may cause discomfort or injury. Use common sense 
to avoid situations where your skin is in contact with a device or its power adapter when it’s 
operating or plugged into a power source for long periods of time. For example, don’t sleep on a 
device or power adapter, or place them under a blanket, pillow, or your body, when it’s plugged 
into a power source. It’s important to keep iPad and its power adapter in a well-ventilated area 
when in use or charging. Take special care if you have a physical condition that affects your 
ability to detect heat against the body.
Hearing loss  Listening to sound at high volumes may damage your hearing. Background noise, 
as well as continued exposure to high volume levels, can make sounds seem quieter than they 
actually are. Turn on audio playback and check the volume before inserting anything in your ear. 
For more information about hearing loss, see www.apple.com/sound/. For information about 
how to set a maximum volume limit on iPad, see Music settings
 on page 73.
To avoid hearing damage, use only compatible receivers, earbuds, headphones, speakerphones, 
or earpieces with iPad. The headsets sold with iPhone 4s or later in China (identifiable by dark 
insulating rings on the plug) are designed to comply with Chinese standards and are only 
compatible with iPhone 4s or later, iPad 2 or later, and iPod touch 5th generation.
WARNING:  To prevent possible hearing damage, do not listen at high volume levels for 
long periods.
Radio frequency exposure  iPad uses radio signals to connect to wireless networks. For 
information about radio frequency (RF) energy resulting from radio signals and steps you can 
take to minimize exposure, go to Settings > General > About > Legal > RF Exposure or visit 
www.apple.com/legal/rfexposure/. 
						

							 Appendix D    Safety, handling, and support 15 9
Radio frequency interference  Observe signs and notices that prohibit or restrict the use of 
mobile devices (for example, in healthcare facilities or blasting areas). Although iPad is designed, 
tested, and manufactured to comply with regulations governing radio frequency emissions, such 
emissions from iPad can negatively affect the operation of other electronic equipment, causing 
them to malfunction. Turn off iPad or use Airplane Mode to turn off the iPad wireless transmitters 
when use is prohibited, such as while traveling in aircraft, or when asked to do so by authorities.
Medical device interference  iPad contains components and radios that emit electromagnetic 
fields. iPad also contains magnets along the left edge of the device and on the right side of the 
front glass, which may interfere with pacemakers, defibrillators, or other medical devices. The 
iPad Smart Cover and iPad Smart Case also contain magnets. These electromagnetic fields and 
magnets may interfere with pacemakers, defibrillators, or other medical devices. Maintain a safe 
distance of separation between your medical device and iPad, the iPad Smart Cover, and the iPad 
Smart Case. Consult your physician and medical device manufacturer for information specific to 
your medical device. If you suspect iPad is interfering with your pacemaker, defibrillator, or any 
other medical device, stop using iPad.
Not a medical device iPad is not designed or intended for use in the diagnosis of disease or 
other conditions, or in the cure, mitigation, treatment, or prevention of disease.
Medical conditions  If you have any medical condition that you believe could be affected by iPad 
(for example, seizures, blackouts, eyestrain, or headaches), consult with your physician prior to 
using iPad. 
Explosive atmospheres  Charging or using iPad in any area with a potentially explosive 
atmosphere, such as areas where the air contains high levels of flammable chemicals, 
vapors, or particles (such as grain, dust, or metal powders), may be hazardous. Obey all signs 
and instructions.
Repetitive motion  When you perform repetitive activities such as typing or playing games on 
iPad, you may experience discomfort in your hands, arms, wrists, shoulders, neck, or other parts 
of your body. If you experience discomfort, stop using iPad and consult a physician.
High-consequence activities  This device is not intended for use where the failure of the device 
could lead to death, personal injury, or severe environmental damage.
Choking hazard  Some iPad accessories may present a choking hazard to small children. Keep 
these accessories away from small children.
Important handling information
Cleaning  Clean iPad immediately if it comes in contact with anything that may cause stains—
such as dirt, ink, makeup, or lotions. To clean:
 •Disconnect all cables and turn iPad off (press and hold the Sleep/Wake button, then slide the 
onscreen slider).
 •Use a soft, lint-free cloth.
 •Avoid getting moisture in openings.
 •Don’t use cleaning products or compressed air.
The front of iPad is made of glass with a fingerprint-resistant oleophobic (oil repellant) coating. 
This coating wears over time with normal usage. Cleaning products and abrasive materials will 
further diminish the coating, and may scratch the glass. 
						

							 Appendix D    Safety, handling, and support 16 0
Using connectors, ports, and buttons  Never force a connector into a port or apply excessive 
pressure to a button, because this may cause damage that is not covered under the warranty. If 
the connector and port don’t join with reasonable ease, they probably don’t match. Check for 
obstructions and make sure that the connector matches the port and that you have positioned 
the connector correctly in relation to the port.
Lightning to USB Cable  Discoloration of the Lightning connector after regular use is normal. 
Dirt, debris, and exposure to moisture may cause discoloration. If your Lightning cable or 
connector become warm during use or your iPad won’t charge or sync, disconnect it from your 
computer or power adapter and clean the Lightning connector with a soft, dry, lint-free cloth. Do 
not use liquids or cleaning products when cleaning the Lightning connector.
Certain usage patterns can contribute to the fraying or breaking of cables. The Lightning to USB 
Cable, like any other metal wire or cable, is subject to becoming weak or brittle if repeatedly bent 
in the same spot. Aim for gentle curves instead of angles in the cable. Regularly inspect the cable 
and connector for any kinks, breaks, bends, or other damage. Should you find any such damage, 
discontinue use of the Lightning to USB Cable.
Operating temperature  iPad is designed to work in ambient temperatures between 32° and 95° 
F (0° and 35° C) and stored in temperatures between -4° and 113° F (-20° and 45° C). iPad can be 
damaged and battery life shortened if stored or operated outside of these temperature ranges. 
Avoid exposing iPad to dramatic changes in temperature or humidity. When you’re using iPad or 
charging the battery, it is normal for iPad to get warm.
If the interior temperature of iPad exceeds normal operating temperatures (for example, in a hot 
car or in direct sunlight for extended periods of time), you may experience the following as it 
attempts to regulate its temperature:
 •iPad stops charging.
 •The screen dims.
 •A temperature warning screen appears.
 •Some apps may close.
Important:  You may not be able to use iPad while the temperature warning screen is displayed. 
If iPad can’t regulate its internal temperature, it goes into deep sleep mode until it cools. Move 
iPad to a cooler location out of direct sunlight and wait a few minutes before trying to use 
iPad again.
For more information, see support.apple.com/kb/HT2101 .
iPad Support site
Comprehensive support information is available online at 
www.apple.com/support/ipad/. To contact Apple for personalized support (not available in all 
areas), see www.apple.com/support/contact/.
Restart or reset iPad
If something isn’t working right, try restarting iPad, forcing an app to quit, or resetting iPad.
Restart iPad. Hold down the Sleep/Wake button until the slider appears. Slide your finger across 
the slider to turn off iPad. To turn iPad back on, hold down the Sleep/Wake button until the 
Apple logo appears.