Apple imac usb 2 0 User Manual
Have a look at the manual Apple imac usb 2 0 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
112 - iMac (USB 2.0) Take Apart Inverter, 17" Display 3. Peel the foil (A) back to access the inverter. Gently pull the inverter (B) off the edge of the display panel.
iMac (USB 2.0) Take Apart - 113 Inverter, 15" Display Inverter, 15 Display Tools This procedure requires the following tools: • Torx-8 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Position the computer in the service stand. • Remove the flat panel display.
114 - iMac (USB 2.0) Take Apart Inverter, 15" Display Procedure 1. Remove the three screws. Remove the inverter cables from the cable clip. Slide the inverter in the direction of the arrow. 2. Turn the inverter over and disconnect the third inverter cable. 3. Remove the inverter from the panel shield.
iMac (USB 2.0) Take Apart - 115 Panel Shield, 15" Display Panel Shield, 15 Display Tools This procedure requires the following tools: • Torx-8 screwdriver • Torx-10 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Position the computer in the service stand. • Remove the flat panel display.
116 - iMac (USB 2.0) Take Apart Panel Shield, 15" Display Procedure 1. Remove the three T-8 screws on the metal cable retainer. Lift the cable retainer off the panel shield. 2. Remove the four T-10 screws in the center of the panel shield. Next, release the cables from the metal clips on the panel shield.
iMac (USB 2.0) Take Apart - 117 Panel Shield, 15" Display 3. Remove the side screws, then gently maneuver the cables through the hole in the center of the panel shield.
118 - iMac (USB 2.0) Take Apart Panel Shield, 15" Display 4. Lift the shield off the back cover being careful not to scratch the white coating on the back cover. 5. CArefully pull the video cable through the hole in the panel shield.
iMac (USB 2.0) Take Apart - 119 LED, 20" and 17" Displays LED, 20 and 17 Displays Note: Do not remove the LED from the bezel. The LED is part of the display bezel and cannot be ordered separately. Part Location Preliminary Steps Before you begin, do the following: • Remove the flat panel display.
120 - iMac (USB 2.0) Take Apart Microphone, 20" and 17" Displays Microphone, 20 and 17 Displays Note: Do not remove the microphone from the bezel. The microphone is part of the display bezel and cannot be ordered separately. Part Location Preliminary Steps Before you begin, do the following: • Remove the flat panel display.
iMac (USB 2.0) Take Apart - 121 Back Cover, 20" Display Back Cover, 20 Display Tools This procedure requires the following tools: • Torx-10 screwdriver Part Location Preliminary Steps Before you begin, do the following: • Position the computer in the service stand. • Remove the flat panel display. • Remove the inverter board. • Disconnect the microphone and LED cables