Apple imac 21 5 inch late 2009 User Manual
Have a look at the manual Apple imac 21 5 inch late 2009 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 195 Apple manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
iMac (21.5-inch, Late 2009) Take Apart — SD Card Reader 171 2010-11-18 Removal 1 Remove T8 screw: (1) 922-9241 2 Using a black stick, gently pry SD card reader up and out of rear housing. 3 Disconnect cable.
iMac (21.5-inch, Late 2009) Take Apart — SD Cable 172 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel • Optical Drive • Optical Drive Fan Tools • ESD wrist strap SD Cable
iMac (21.5-inch, Late 2009) Take Apart — SD Cable 173 2010-11-18 Removal 1 Disconnect cable from SD card reader and logic board. 2 Peel up foil holding cable to rear housing.
iMac (21.5-inch, Late 2009) Take Apart — Audio Cable 174 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Tools • ESD wrist strap • Torx T10 screwdriver Audio Cable
iMac (21.5-inch, Late 2009) Take Apart — Audio Cable 175 2010-11-18 Removal 1 Remove T10 screws: (2) 922-9245 2 Disconnect cable from logic board. Reassembly Note: A black stick can be helpful for guiding and aligning audio ports with rear housing. Reassembly Note: Plugging in earbuds or headphones can also help keep audio cable aligned while tightening screws.
iMac (21.5-inch, Late 2009) Take Apart — IR Board & Cable 176 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Note: A new IR board includes a new cable. The cable is not available as a separate part. Tools • ESD wrist strap IR Board & Cable
iMac (21.5-inch, Late 2009) Take Apart — IR Board & Cable 177 2010-11-18 Removal 1 Disconnect IR cable from logic board. 2 With 2 fingers, wiggle IR mounting bracket up and off mounting post. Reassembly Note: Pull the front housing out slightly to make room for IR mounting bracket to slide onto IR mounting post.
iMac (21.5-inch, Late 2009) Take Apart — Logic Board 178 2010-11-18 First Steps Remove: • Access Door • Memory Tip: The logic board is much easier to reinstall if memory is removed. • Glass Panel • LCD Panel • Power Supply • Backlight Pressure Wall • Power Supply Pressure Wall • Optical Drive • Optical Drive Fan • IR Board Note: Configurations with integrated graphics (IG) do not have bracket at upper right which holds video card and heatsink. Tools • ESD wrist strap • Torx T10 screwdriver Logic Board
iMac (21.5-inch, Late 2009) Take Apart — Logic Board 179 2010-11-18 Removal 1 Remove T10 screws: • (2) 922-6800, short (S) (only 1 if unit has no video card bracket) • (2) 922-9237, medium 20mm (M) • (3) 922-9243, long 24mm (L) 2 Disconnect cables from left side of logic board: • power button (1) • CPU fan (2) Note: IR cable (3) should have already been disconnected.
iMac (21.5-inch, Late 2009) Take Apart — Logic Board 180 2010-11-18 3 Disconnect cables from top center of logic board: • ambient temp (4) • Bluetooth (5) • camera (6) • hard drive sensor (7) • hard drive fan (8) • microphone (9) • AirPort (10) • audio cable (13) • right speaker (14) • left speaker (15) Note: LCD temp sensor (11) and LVDS (12) cables should have already been disconnected. 4 Disconnect SD cable (16) from right side of logic board: Note: Optical drive temp (17) and optical drive fan (18) cables should have already been disconnected.