Apple imac 21 5 inch late 2009 User Manual
Here you can view all the pages of manual Apple imac 21 5 inch late 2009 User Manual. The Apple manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 131
iMac (21.5-inch, Late 2009) Take Apart — LVDS Cable 131 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Removal 1 Peel back any black mylar securing cable to LCD panel. 2 Disconnect LVDS cable by (2) pressing in on side release clips and then (3) gently pulling down. LVDS Cable
Page 132
iMac (21.5-inch, Late 2009) Take Apart — Bluetooth Antenna 132 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Tools • ESD wrist strap • Torx T8 screwdriver Bluetooth Antenna
Page 133
iMac (21.5-inch, Late 2009) Take Apart — Bluetooth Antenna 133 2010-11-18 Removal 1 Remove T8 screws: (2) 922-4723 2 Disconnect blue antenna cable from Bluetooth board.
Page 134
iMac (21.5-inch, Late 2009) Take Apart — Bluetooth Board 134 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Tools • ESD wrist strap • Torx T8 screwdriver Bluetooth Board
Page 135
iMac (21.5-inch, Late 2009) Take Apart — Bluetooth Board 135 2010-11-18 Removal 1 Remove T8 screw: (1) 922-9247 2 Disconnect blue antenna cable. 3 Disconnect black cable.
Page 136
iMac (21.5-inch, Late 2009) Take Apart — AirPort Antenna 136 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Note: There is a second AirPort antenna built-in to rear housing behind Apple logo on back of iMac, however, it is not removable and can only be repaired via rear housing replacement. Tools • ESD wrist strap • Torx T8 screwdriver AirPort Antenna
Page 137
iMac (21.5-inch, Late 2009) Take Apart — AirPort Antenna 137 2010-11-18 Removal 1 Remove T8 screws: (2) 922-4723 2 Disconnect black antenna cable from AirPort card. 3 Peel up clear tape securing antenna cable to rear housing.
Page 138
iMac (21.5-inch, Late 2009) Take Apart — AirPort Card 138 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Tools • ESD wrist strap • Torx T6 screwdriver AirPort Card
Page 139
iMac (21.5-inch, Late 2009) Take Apart — AirPort Card 139 2010-11-18 Removal 1 Remove T6 screw: (1) 922-8579 2 Disconnect 2 antenna cables. Important: Antenna cables and connectors are delicate. If the shorter of the two antenna cables is damaged, you will need to replace rear housing. 3 Hold AirPort card by edges and pull it out of the slot.
Page 140
iMac (21.5-inch, Late 2009) Take Apart — AirPort Cable 140 2010-11-18 First Steps Remove: • Glass Panel • LCD Panel Tools • ESD wrist strap AirPort Cable