Apple imac 20 inch early 2008 User Manual
Here you can view all the pages of manual Apple imac 20 inch early 2008 User Manual. The Apple manuals for Display are available online for free. You can easily download all the documents as PDF.
Page 91
iMac (20-inch Early 2008) Take Apart — Inverter 91 9. Connect the LVDS cable to the logic board. Replace the two T6 screws. 10. Install the eight T8 display mounting screws. Replace the front bezel.11 . 922-7010 922-8172
Page 92
iMac (20-inch Early 2008) Take Apart — Inverter 92 Clean and r12. eplace the glass panel. Note: This step is very important. Follow the procedures to ensure the glass is clean and free of particles. Replace the access door 13 . .
Page 93
iMac (20-inch Early 2008) Take Apart — Speaker, Right 93 Speaker, Right Tools Torx T10 screwdriver• Preliminary Steps Before you begin, remove the following: A • ccess door Glass Pane • l F • ront bezel LCD display pane • l Part Location
Page 94
iMac (20-inch Early 2008) Take Apart — Speaker, Right 94 Removing the Right Speaker 1. Remove the T10 screw from the right speaker. Disconnect the speaker cable from the audio board. 2. Pull the speaker up and out of the computer assembly.3. 922-7066
Page 95
iMac (20-inch Early 2008) Take Apart — Speaker, Right 95 Replacing the Right Speaker Install the speaker in the computer assembly.1. 2. Connect the speaker cable to the audio board. Replace the T10 screw on the speaker. Replace the display panel3. . Replace the front bezel. 4. Clean and replace the glass panel5. . Note: This step is very important. Follow the procedures to ensure the glass is clean and free of particles. Replace the access door 6. .. 922-7066
Page 96
iMac (20-inch Early 2008) Take Apart — Speaker, Left 96 Speaker, Left Tools Torx T10 screwdriver• Preliminary Steps Before you begin, remove the following: A • ccess door Glass Pane • l F • ront bezel LCD display pane • l Part Location
Page 97
iMac (20-inch Early 2008) Take Apart — Speaker, Left 97 Removing the Left Speaker 1. Using a T10 torx screwdriver, remove the long screw from the left speaker. Replacement Note: The longer of the two speaker mounting screws is used to secure the left speaker; the shorter screw secures the right speaker. Disconnect the ambient temp sensor cable from the left side of the logic board. 2. Disconnect the left speaker cable. The cable runs under the black plastic cable holder (above 3. the memory slot)...
Page 98
iMac (20-inch Early 2008) Take Apart — Speaker, Left 98 Disconnect the speaker from the audio board. 4. Lift the speaker out of the rear housing.5.
Page 99
iMac (20-inch Early 2008) Take Apart — Speaker, Left 99 Replacing the Left Speaker 1. Install the speaker in the rear housing. Secure the left speaker with the longer of the two speaker mounting screws. Route the speaker cable under the tab on the CPU fan and under the black cable holder. Connect the ambient temp sensor cable to the left side of the logic board. 2. Connect the speaker cable to the audio board. Route the cable under the black cable holder 3. (above the memory slot). 922-8249
Page 100
iMac (20-inch Early 2008) Take Apart — Speaker, Left 100 Replace the display panel4. . Replace the front bezel. 5. Clean and replace the glass panel6. . Note: This step is very important. Follow the procedures to ensure the glass is clean and free of particles. Replace the access door 7. ..