Apple ibook g4 14 early 2004 User Manual
Here you can view all the pages of manual Apple ibook g4 14 early 2004 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 131
iBook G4 (14-inch) Take Apart - 130 Display Housing (Back Case) Display Housing (Back Case) Tools • Soft cloth • Torx T6 screwdriver or 5/32 hex driver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the LCD panel assembly, use a tray with divided compartments (such as a plastic ice cube tray). Replacement Note: If the tape you remove from this assembly is worn and cannot be reused, use new Kapton tape (Apple part number 922-5025). Preliminary...
Page 132
131 - iBook G4 (14-inch) Take Apart Display Housing (Back Case) Procedure Important: Although the display pictured in this section may appear different from the display you are working on, the steps are the same. 1. With the display module lying face up on a soft cloth, use either a 5/32 hex driver or a Torx T6 screwdriver to remove the four screws (two on each side) from the display housing. 2. Using a black stick, pry up the bezel from the display housing. Carefully work the black stick around...
Page 133
iBook G4 (14-inch) Take Apart - 132 Display Housing (Back Case)3.Warning: When lifting the assembly, be careful not to strain the cables. With the bezel assembly loosened, grasp the display clutch and raise the assembly off of the display housing. 4. Place the display assembly face down on a soft cloth.
Page 134
133 - iBook G4 (14-inch) Take Apart LCD Panel LCD Panel Tools • Soft cloth • Torx T6 screwdriver or 5/32 hex driver • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the LCD panel assembly, use a tray with divided compartments (such as a plastic ice cube tray). Replacement Note: If the tape you remove from this assembly is worn and cannot be reused, use new Kapton tape (Apple part number 922-5025). Preliminary Steps...
Page 135
iBook G4 (14-inch) Take Apart - 134 LCD Panel Procedure Note: Although your display assembly might appear somewhat different than shown, the steps to follow are the same. 1. With the display module lying face up on a soft cloth, use either a 5/32 hex driver or a Torx T6 screwdriver to remove the four 8-mm long screws (two on each side) from the display housing. 2. Using a black stick, pry up the bezel from the display housing. Carefully work the black stick around the outer perimeter and...
Page 136
135 - iBook G4 (14-inch) Take Apart LCD Panel 3.Warning: When lifting the assembly, be careful not to strain the cables. With the bezel assembly loosened, grasp the display clutch and raise the assembly off of the display housing.
Page 137
iBook G4 (14-inch) Take Apart - 136 LCD Panel4. Place the display assembly face down on a soft cloth. Note: The LCD panel might appear like one of the images shown.
Page 138
137 - iBook G4 (14-inch) Take Apart LCD Panel 5. Notice the U-shaped notches on the sides of the bezel. 6. Remove the four 3-mm long Phillips screws (two on each side) from the display shield. (Carefully move aside any cables or tape that partially block access to the screws.) 7. Peel up the foil tape that holds the LCD cable to the LCD shield. 3 mm 3 mm
Page 139
iBook G4 (14-inch) Take Apart - 138 LCD Panel8. Peel up the tape if it covers the two screws at the clutch. Remove the two 11-mm long Phillips screws. 9. Peel up the tape that anchors the folded mesh strip of the LCD cable to the shield. Note: The positioning of the tape on the shield might differ among computer models.
Page 140
139 - iBook G4 (14-inch) Take Apart LCD Panel 10. Loosen the remaining tape that secures the shield to the assembly. Remove the shield.