Apple ibook g4 12 inch mid 2005 User Manual
Here you can view all the pages of manual Apple ibook g4 12 inch mid 2005 User Manual. The Apple manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 161
iBook G4 (12-inch Mid 2005) Take Apart - 160 AirPort Extreme/Bluetooth Antenna Cables 2. Remove the spiral tube, if provided, by unwrapping it from the cable bundle. Note: Not all models include the spiral tube. 3. Peel away the tape that binds the antenna cables to the inverter cable. Remove the gray and black antenna cables from the tape. Important: Note how the individual cables overlap where they exit the display: gra\ y antenna cable crosses over black antenna cable; black antenna cable thre\...
Page 162
161 - iBook G4 (12-inch Mid 2005) Take Apart AirPort Extreme/Bluetooth Antenna Cables 4. Carefully lift up the black antenna cable from the guides along the left corner and left side of the bezel brace. Do not strain any cables. 5. Remove the two 3-mm long screws that secure the antenna receptor—with black cable attached. 6. From the left side of the bezel, slide the antenna receptor toward the top of the bezel to release it from the bezel assembly.
Page 163
iBook G4 (12-inch Mid 2005) Take Apart - 162 AirPort Extreme/Bluetooth Antenna Cables 7. From the bottom of the bezel, lift up the inverter cable where the mesh tab anchors the gray antenna cable between the bezel brace and the inverter board.
Page 164
163 - iBook G4 (12-inch Mid 2005) Take Apart AirPort Extreme/Bluetooth Antenna Cables 8. Note how the gray cable is routed along the bottom of the inverter board, under the bezel brace, and around the corner by the corner tab. 9. Remove any tape from the bottom and right side of the bezel brace. 10. Loosen the gray cable from the cable guides at the right lower corner and up the right side of the bezel brace. 11. From the right side of the bezel brace, remove the two 3-mm long screws that secure...
Page 165
iBook G4 (12-inch Mid 2005) Take Apart - 164 AirPort Extreme/Bluetooth Antenna Cables 13. Install the replacement AirPort Extreme/Bluetooth antenna cable assembly, and reassemble and test the computer.
Page 166
165 - iBook G4 (12-inch Mid 2005) Take Apart Inverter Cable Inverter Cable Tools • Soft cloth • Black stick (or other nonconductive nylon or plastic tool) Note: To organize the screws you remove from the display assembly, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom shield • DC-in board
Page 167
iBook G4 (12-inch Mid 2005) Take Apart - 166 Inverter Cable • Top case • Top shield • Modem • AirPort Extreme/Bluetooth card • Display module • Display rear housing • Display clutch cover • Display shield Procedure 1. If tape covers the inverter cable where it exits the bezel, remove the tape.
Page 168
167 - iBook G4 (12-inch Mid 2005) Take Apart Inverter Cable 2. Peel away the tape that binds the inverter cable to the antenna cables. Remove the gray and black antenna cables where they overlap the inverter cable. Important: Note how the individual cables overlap where they exit the display: gra\ y antenna cable crosses over black antenna cable; black antenna cable thre\ ads under the green inverter cable. Replace the cables in the same orientation. 3. Note how the silver colored mesh tab at the...
Page 169
iBook G4 (12-inch Mid 2005) Take Apart - 168 Inverter Cable 4. Use a black stick or flat-blade jeweler’s screwdriver to disconnect the inverter cable from the inverter board. 5. Install the replacement inverter cable and tape, and reassemble and test the computer.
Page 170
169 - iBook G4 (12-inch Mid 2005) Take Apart Inverter Board Inverter Board Tools • Soft cloth • #0 Phillips screwdriver • Black stick (or other nonconductive nylon or plastic tool) • Jeweler’s flat-blade screwdriver Note: To organize the screws you remove from the display assembly, use a tray with divided compartments (such as a plastic ice cube tray). Part Location Preliminary Steps Before you begin, remove the following: • Battery • Keyboard and RAM shield • Memory card • Bottom case • Bottom...