AOR CU8232 Remote Control Interface Instructions
View the AOR CU8232 Remote Control Interface Instructions for free. All the AOR manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 4
- 4 -
Figure 1
The [PROGRAM] socket is the primary receiver connection used for computer
control. This port also takes power from the receiver (when the AR8000 is
switched On).
Should you wish to CLONE data between two AR8000 receivers, connect the
second ribbon cable to the socket labelled [COPY].
2.Remove the battery compartment lid of the AR8000 using a downward sliding
motion.
Figure 2
Locate the remote control socket which is located at the bottom edge of the
battery compartment. Insert the ribbon...](http://img.usermanuals.tech/thumb/5671/81812/w300_aor_cu8232-rs232-unit-for-ar8000-and-ar2700_manual-1_d-3.png "Page 4
- 4 -
Figure 1
The [PROGRAM] socket is the primary receiver connection used for computer
control. This port also takes power from the receiver (when the AR8000 is
switched On).
Should you wish to CLONE data between two AR8000 receivers, connect the
second ribbon cable to the socket labelled [COPY].
2.Remove the battery compartment lid of the AR8000 using a downward sliding
motion.
Figure 2
Locate the remote control socket which is located at the bottom edge of the
battery compartment. Insert the ribbon...")