AOC Lc32w063 User Manual

20
5. Search TV channel
Start
Previous Cancel
Navigate: Select:
OK
Initial Wizard (6/8)
Please check if RF cable is
connected oroperly ...
1press
 ▲/▼  to select “previous” or “Cancel” for rf Tuning setting. press “oK” will execute channel searching.
Cancel
CH 100
66
Searching Analog CH
55
Analog Channels Found
Digital Channels Found
100%
Navigate: Select:
OK
Initial Wizard (7/8)
Searching, Please wait ...
1press
 ▲/▼  to select “Cancel” for rf Tuning setting. press “oK” will execute cancel the channel...

21
Exit: Cancel
Initial Wizard (8/8)
Congratulations, TV Setup is done.
1MU
/ E xit
E
Npress  MU
/ E xit
E
Nto exit initial setting wizard.
 

22
Viewing mode Selection
for TV input with Sd programs
normal mode
Suitable for viewing conventional 4:3 programs in 
their normal format.
Zoom1 mode
Use these aspect modes to zoom in and to reduce 
the black bars.
Wide mode
The original content in this mode has to fill the 
entire screen of the display.
Zoom2 mode
Use these aspect modes to zoom in and to reduce 
the black bars.
for TV input with hd programs
normal mode
Suitable for viewing conventional 4:3 programs in 
their normal format.
Zoom1 mode...

23
Switching Input Source
On AOC TV, you can choose signal source on the remote control directly, or press “Source” to choose the signal source on the display menu.
1.  When choosing signal source on the remote control  directly: Press the following keys to switch input source.
 
MTS
CC
PR E CH
Dis p la y
E PGW id e
A dd Fav
COMP
F avM U
/ E xit
E
N
COMP
2.  When using “Source ” key to choose signal source:
OKMENU
/Exit
0. TV
1. AV1
2. AV2
3. Component 1
4. Component 2 5. VGA
6. HDMI 1
7. HDMI 2
8. HDMI...

24
oSd manual Setting 
Channel Search 
OKMENU/Exit
CHANNEL
Move Select ReturnExit
Channel Strength
Auto CH Search
Channels List Add on CH Search
Channel Labels
FAV Channel Setting Cable
Tuning Band
1M U
/ E xit
E
NPress menU to call out MENU.
2
Press ▲/▼ to select “Channel” , and press oK.
3
Press ▲/▼ to select “Auto CH Search”, and then press oK.
The submenu of CHANNEL menu in TV mode shows as below.
1)  Tuning Band:  Select TV source signal from the Air (antenna) or Cable (CATV).
2)  Channel Strength:...

25
Changing Channel/flashback
On AOC TV, you can change channel on the remote control  directly, or press Ch ▲/▼ on the side of the TV to choose the channel.
1.  Press the number keys directly to change the channel.
 
P R
2.  Press the Ch to change channel.
 
3.  Press pre Ch to go to the previous channel.
 
 
P R E CH
37-2
 

26
Changing Volume, mute and Sound mode
1. Press Vol to change the volume.
 
2.  Press mUTe to mute the TV.
 
3.  Press audio  to change surround mode: Music , Speech and Personal.
 
For more details, please refer to “Adjust Audio  Setting”.
 

27
adjust Video Setting
OKMENU/Exit
VIDEO
Move Select ReturnExit
Brightness
Contrast
Color Sharpness
Tint
Color Temp
Vivid
69 56 53
45
G3 Cool
Picture Mode
1M
U
/ E xit
E
NPress menU/exIT to call out MENU.
2
Press ▲/▼ to select “VIDEO ” , and press oK.
3
Press ▲/▼ to select Video Settings: Picture Mode, Brightness, Contrast, Sharpness, Color , Tint, Color temp, Noise 
reduction , Adaptive Contrast, DCR, Backlight, Aspect Ratio , Preset, and press oK to enter.
4
Press ◄/► to adjust.
5
M U
/ E xit
E
NPress...

28
adjust audio Setting 
OKMENU
/Exit
AUDIO
Sound Mode
Bass
Treble
Audio Source Balance 32
32
0
SPDIF
Speaker
Move Select ReturnExit
Personal
StereoPCM
On
1M U
/ E xit
E
NPress menU/exIT to call out MENU.
2
Press ▲/▼ to select “Audio” , and press oK.
3
Press ▲/▼ to select Audio Settings：Sound mode, Bass , Treble, Balance, Audio Source, SPDIF, Speaker, Multi 
Language, AVL , Preset, and press oK to enter.
4
Press ◄/► to adjust.
5
M U
/ E xit
E
NPress menU/exIT again  to exit.
audio Setting  Items...

29
adjust pC Setting
This setting is only available in PC mode.
OKMENU/Exit
VGA
Move Select ReturnExit
V-Position
Clock
Auto Adjust Phase
Preset H-Position 13 17
8
2
1M U
/ E xit
E
NPress menU/exIT to call out MENU.
2
Press ▲/▼ to select “PC” , and press oK.
3
Press ▲/▼ to select PC Settings: H. Position , V. Position, Clock, Phase, Auto adjust, Preset, and press oK to 
enter.
4
Press ◄/► to adjust.
5
M U
/ E xit
E
NPress menU/exIT  again to exit.
pC Setting description
auto adjust Auto sync. PC timing...