AOC Lc27h060 User Manual

							 39

NPress  EXIT go back to the previous page. 

N Use ►  or ◄ to display the next or previous picture.
 

NUse ▲  or ▼ to rotate right or rotate left the picture.(Only available in X1.0 mode) 

N Press  ZOOM  to zoom in. (X1.5~X4.0) 

N When the Zoom mode, press  ▲▼◄► to move. 

N Press  ENTER  to auto-play or stop the pictures.
 
 
In “Option” menu can setup following functions: 
  
Note:  The Media function is only active in USB source.  When in TV, AV, S-Video, YPbPr, HDMI1, 
HDMI2, HDMI3 and PC source, the Media function will not appear. 
 
1. Press the  MENU button to display the OSD main menu. 
2. Press  ◄ or ►  to select “Option” menu, then press ENTER or ▼  to enter the menu.   
Press  ▲ or ▼ to select “Media”, and use  ► to enter “Media” setting. 
 
z  SlideShow Timer: To select the pictures auto-play interval time. 
z  Trans. Effect:  To select the auto-play effects of the slide show. 
z  File List Sorting:  To select the pictures arrange. 
z  SlideShow Repeat:  To select the slide show repeat to On or Off. 
English
 
						

							 40
TECHNICAL SPECIFICATION 
Type 27” TFT Active Matrix 
0.3114 (H) x 0.3114 (V) mm pixel pitch 
Color Filter RGB vertical stripe 
LCD  
Glass surface Anti-Glare 
RGB RGB analog (0.7/1.0 Vp-p, 75 ohms) Separate Sync, 
fh: 30-82 kHz, fv:55-76 Hz 
RF TV system Antenna / NTSC+ATSC 
TV Cable system / CATV + Digital Cable 
Input signal 
Video 1 composite RCA, 1 S-Video, 1 YPbPr component, 
3 HDMI, 1 USB 2.0 
 Audio 1 mini-stereo, 2 pair of RCA (L/R) stereo 
Compatibility PC Up to 1920 x 1080 Non-interlaced 
Resolution Recommended 
and supported 
1920 x 1080 @ 60 Hz 
1680 x 1050 @ 60 Hz 
1440 x 900 @ 60 Hz 
1280 x 1024 @ 60 Hz 
1024 x 768 @ 60, 75 Hz 
800 x 600 @ 60, 75 Hz 
640 x 480 @ 60, 75 Hz 
Speaker Output  5W x 2 @THD=10% 
Audio Output  1 Headphone jack, 1 stereo RCA jack, 1 SPDIF(optical)
Power Voltage 100-240 VAC, 50/60 Hz (auto switch) 
Display area Full Scan 597.89 mm (H) x 336.31 mm (V) 
23.54” (H) x 13.24” (V) 
Temperature 32°F to + 104 °F ( 0 °C to + 40 °C) 
Humidity 10% to 65% (no condensation) 
Operating  
conditions 
Altitude To 6,500 feet (2,000m) 
Temperature -4 °F to + 140 °F (-20 °C to + 60 °C) 
Humidity 0% to 90% (no condensation) 
Storage condition 
Altitude To 40,000 feet (12,000m) 
Dimensions Physical 646.3mm (W) x 465.7mm (H) x 239.5mm (D)   
25.44’’ (W) x 18.33’’ (H) x 9.43’’ (D) 
Weight With stand 7.06 kg (15.56 lb) 
 Without stand 6.67 kg (14.70 lb) 
Regulations  UL/cUL, FCC-B (Doc-B), BETS-7, Energy Star 4.0 
On  < 75 W [Max] (blue LED) Power saving modes 
Stand by < 1W @ 115 Vac only (orange LED) 
Preset Timing Mode  (Pre-adjusted to GTF® 1920 x 1080 @ 60 Hz) 
Note: Simultaneously press “ MENU” and “CH▼” keys on TV panel to switch between similar PC timings.
Similar PC Timing on list below:   
• 640 x 350 @ 70Hz / 640 x 400 @ 70Hz / 720 x 400 @ 70Hz   
•  1024 x 768 @ 60, 75Hz / 1280 x 768 @ 60, 75Hz / 1360 x 768 @ 60Hz
 
• 1680 x 1050 @ 60, 75 Hz / 1400 x 1050 @ 60, 75 Hz
 
• 1600 x 900 @ 60, 75 Hz / 1440 x 900 @ 60, 75 Hz
 
Warning: Do not set the graphics card in your computer to exceed these refresh rates; 
doing so may result in permanent damage to the LCD TV 
Note: Product Specifications are subject to change without notice.  
English
 
						

							 41
SAFETY PRECAUTIONS 
 
This LCD TV is manufactured and tested to insure the user’s safety. Improper use or 
installation may result danger to the LCD TV as well as to the user. Carefully go over the 
following WARNINGS before installation and keep this guide handy. 
 
 
WARNINGS  
z This LCD TV should be operated only at the correct power sources indicated on the\
 label on 
the rear end of the LCD TV. If you’re unsure of the power supply in your residence, consult 
your local dealer or power company. 
 
z  Do not try to repair the LCD TV yourself as it contains no user-serviceable parts. The LCD TV 
should only be repaired by a qualified technician.   
 
z  Do not remove the LCD TV cabinet. There is high-voltage parts inside that may cause electric 
shock. even when the power cord is disconnected . 
 
z  Stop using the LCD TV if the cabinet is damaged. Have it checked by a service technician. 
 
z  Put your LCD TV only in a clean, dry environment. Unplug the LCD TV immediately if gets wet 
and consult your service technician. 
 
z  Always unplug the LCD TV before cleaning it. Clean the cabinet with a clean, dry cloth. Apply 
non-ammonia based cleaner onto the cloth, not directly onto the glass sc\
reen. 
 
z  Keep the LCD TV away from magnetic objects, motors, TV sets, and transformer. 
 
z  Do not place heavy objects on the cable or power cord. 
 
z  For  PLUG CABLE  EQUIPMENT, the  Socket-outlet  shall  be installed near  the equipment and 
shall be easily accessible.  
English
 
						

							 42
CARE AND MAINTENANCE 
Care 
z Avoid exposing your LCD TV directly to sunlight or other heat source.
 
z  Place your LCD TV away from the sun to reduce glare.
 
z  Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your\
 LCD TV.
 
z  Make certain your LCD TV is installed in a clean and moisture-free area.
 
z  Keep your LCD TV away from magnets, moto rs, transformers, speakers, and TV sets. 
 
Safety Tips 
z  If smoke, abnormal noise or odor came out of your LCD TV, remove the power cord 
immediately and call your service center.
 
z  CAUTION-Never remove the rear cover of your LCD TV cabinet. The display unit inside 
contains high-voltage parts and may cause electric shock to human bodies.
 
z  Never try to repair your LCD TV yourself. Always call your service center or a qualified 
technician to fix it.  
 
 
TROUBLESHOOTING 
No power 
z Make sure A/C power cord is securely connected.  
z  Plug another electrical device into the power outlet to verify that the \
outlet is supplying proper 
voltage. 
 
Power on but no screen image 
z Make sure the video cable supplied with the TV is tightly secured to the video output port on 
back of video source (DVD, VCR…). If not, tightly secure it.  
z  Adjust brightness. 
z  Make sure all signal cables are installed.  
 
Wrong or abnormal colors 
z  If any colors (red, green, blue) are missing, check the video cable to\
 make sure it is securely 
connected. Loose or broken pins in the cabl e connector could cause an improper connection.  
z  Connect the TV unit to another video source or use another TVs to make sure the video source 
was not causing the problem. 
 
English