AOC Lc27h060 User Manual

							 29
In HDMI1, HDMI2, HDMI3 source:  In USB source: 
     
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, HDMI3, PC and USB sources. 
 
z Menu Language:  To select an OSD language from English, French or Spanish. 
z  Transparency:  To change the transparency of OSD window. (0%, 25%, 50%, 75%, 100%) 
z  OSD Time Out:  To setup the display time of OSD. (5, 15, 30, 45, and 60 seconds) 
z  Closed Caption:  To set close caption options.(Only available in TV, AV, S-Video source.) 
 

						

							 30
 
 
z  Restore Default:  To restore the factory default settings.  
z  Input Label: To change the input source name.  
z  DCR:  To turn on/off the DCR (Dynamic Contrast Ratio 100,000:1) function.  
(Except USB source.) 
z  Over Scan:  To select this function to On or Off in HDMI1, HDMI2 and HDMI3.(Only available 
when input signal is in video timing. Ex:480i, 480p, 720p,1080i, 1080p)\
  
z  Media: To set the picture slide show setting.(Only available in USB source.(Se\
e page 39))  
English
 
						

							 31
LOCK Menu 
—To set up parental control 
It is active in all input sources:
 
 
 
Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI1, 
HDMI2, HDMI3, PC and USB sources.  
 
z  Enter Password: Enter password and the screen below will show. (The default password is 
0000.) 
  
Note: Some options will be disabled when in YPbPr,  HDMI1, HDMI2, HDMI3, PC and USB
 source. 
 
z  Change Password:  To change the password, press ► , and the screen on the right appears. 
Follow the instructions to change password. 
z  System Lock: Select “On” to enable the following options. 
Note: The below options can be enabled only when “On” is selected here. 
z  Unrated Lock:  Select “On” to block unrated movies or TV programs. (Only active in TV, AV, 
S-Video sources) 
z  Input Block:  To set the input source to be blocked. 
English
 
						

							 32
z US:  Press  ► to set TV or MPAA ratings. (Only active in TV, AV, S-Video sources) 
 
 

						

							 33

						

							 34

						

							 35
CHANNEL Menu 
—To set up for TV 
Note: The Channel Menu is only active in TV source. When in AV, S-Video, YPbPr, HDMI1, HDMI2, 
HDMI3 , PC and USB source, the CHANNEL Menu will not appear. 
 
 
Note: The condition of DTV Signal will only be displayed when source is in DTV\
. 
 
z  TV Source:  To select Cable or Air as the TV source.   
z  Auto Scan:  To auto scan the TV or DTV channels. Select Air or Cable in TV Source option, 
and press  ► to start auto scanning TV channels. Press  MENU again at any time to interrupt   
scanning. 
  
English
 
						

							 36
z Favorite: To set your favorite channels into memory. Press  ENTER to confirm / cancel your 
favorite channels. Press ◄► to go to previous / next page.   
  
 
z  Show/Hide:  Press ENTER  to skip the selected channel. To restore the channel, press  ENTER 
again. 
 
 
z  Channel No.:  Press ◄► to select a channel. The channel selected will be shown on the 
screen at the same time. 
 
English
 
						

							 37
z Channel Label:  Press ► to edit a name for the current channel (the channel selected in 
Channel No.). Use ▲▼  to choose letters or signs,  ◄► to move forward or backward, and 
then press  MENU or ENTER  to exit. 
 
  
 
z  DTV Signal: To display the detected signal strength of the current DTV channel.   
English
 
						

							 38
USB Source 
—To display the USB picture 
(only supports JPEG, BMP and PNG image files) 
 
1. When input source is selected to USB, insert the USB device into the \
USB jack.   
USB only supports JPEG, BMP and PNG image files (With
symbol). 
2. Use ▲  or ▼ to select the folder you want, and press  ENTER.
 
 
3. Return to main menu, press  ▲ or ▼  to ”--“ and press ENTER .  
Use ▲  or ▼ to select the image files you want, and press  ENTER.
 
  
 
In USB mode, you can use the buttons to make following functions: 
Press INFO can view all of the functions. 
 
English