AOC L47861 User Manual

10

English

English

English

English

TO USE THE REMOTE CONTROL
POWER
Press to power ON/OFF 
(standby) TV.(Note:1.TV is 
never completely  power off. 
unless physically unplugged. 
2.Press to turn on TV after 
the power on status, LED had 
changed to the red color and 
stopped flashing.)
VIDEO
Press repeatedly to choose 
S-Video/Composite source 
mode.
COMP
Press repeatedly to choose 
Component source mode.
PC/HDMI
Press repeatedly to choose VGA 
or HDMI source mode.
TV
Press to choose ATSC/NTSC 
TV...

English

English

11

English

English

VIEWING MODELS ILLUSTRATIONS
Normal Mode on 16:9 Display screen
The original content would be at the center 
of the screen.
Wide Mode on 16:9 Display screen
The original content in this mode has to fill 
the entire width of the display horizontally.

Wide Mode on 16:10 Display screen
Wide1 and Wide2 are applied:
Wide1:  The original content would fill the 
full screen while the proper ratio of 
16:9 content is still maintained. Little 
cropping of the content on...

12

English

English

English

English

ZOOM Mode on 16:9 Display screen
For those wide format images which are originally programmed into 4:3 frames with top and 
bottom black bars, this mode would stretch the image in both width and heigh for full display 
with active data.

16:9 image in 4:3 frame
  

Same image in ZOOM mode
ZOOM Mode on 16:10 Display screen
For those wide format images which are originally programmed into 4:3 frames with top and 
bottom black bars, this mode would stretch the image...

English

English

13

English

English

CONNECTING EQUIPMENT
Coaxial (RF)
Using Your Antenna or Digital Cable for 
DTV.

1.  Turn off the power to the HDTV.
2.    Connect the coaxial (RF) connector from 
your antenna or digital cable (out-of-
the-wall, not from the Cable Box) to the 
ANTENNA/CABLE DIGITAL/ANALOG 
connector.
3.  Turn on the power to the HDTV.
4.    Select DTV using the INPUT (SOURCE) 
button on the remote, side of the HDTV 
or directly by pressing the TV button on 
the Remote Control....

14

English

English

English

English

Connecting Your HDTV Set-Top Box
Using HDMI
HDTV Set-Top Boxes that have a HDMI digital 
interface should be connected to the HDMI 
input of the LCD HDTV for optimal results.
Connecting your HDTV Set-Top Box 
(Best)

1.    Turn off the power to the HDTV and 
HDTV Set-Top Box.
2.    Connect a HDMI cable to the HDMI 
output of your HDTV Set-Top Box and the 
other end to the HDMI Input at the rear 
of the HDTV.
3.    Turn on the power to the HDTV and 
HDTV Set-Top...

English

English

15

English

English

Using Component Video
Connecting your HDTV Set-Top Box 
(Better):

1.   Turn off the power to the HDTV and 
HDTV Set-Top Box.
2.    Connect the Pr (red color) connector 
on your HDTV Set-Top Box to the 
corresponding Pr (red color) connector in 
the Component group. 
3.    Connect the Pb (blue color) connector 
on your HDTV Set-Top Box to the 
corresponding Pb (blue color) connector 
in the Component group. 
4.    Connect the Y (green color) connector 
on your...

16

English

English

English

English

Using Coax (RF)

1.    Turn off the power to the HDTV and Set-
Top Box.
2.    Using a Coax (RF) cable, connect one end 
to the TV OUT (RF) on your Set Top Box 
and the other end to the DTV/TV input at 
the rear of the HDTV.
3.    Turn on the power to the HDTV and Set-
Top Box.
4.    Select TV using the INPUT (SOURCE) 
button on the remote, side of the HDTV 
or directly by pressing the TV button 
(below the WIDE button) on the Remote 
Control.

 NOTE
  
 Refer to...

English

English

17

English

English

Using Component Video
Connecting your DVD Player (Better)

1.    Turn off the power to the HDTV and DVD 
player.
2.    Connect the Pr (red color) connector on 
your DVD player to the corresponding Pr 
(red color) connector in the Component 
at the rear of the HDTV.
3.    Connect the Pb (blue color) connector on 
your DVD player to the corresponding Pb 
(blue color) connector in the Component 
group at the rear of the HDTV.
4.    Connect the Y (green color)...

18

English

English

English

English

3.    Connect the R (red color) and L (white 
color) audio connectors on your DVD 
player to the corresponding R (red color) 
and L (white color) audio input connectors 
in the AV group.
4.    Turn on the power to the HDTV and DVD 
Player.
5.    Select Composite (Video 1) using the 
INPUT (SOURCE) button on the remote, 
side of the HDTV or directly by pressing 
the AV button on the Remote Control.
Connecting Your VCR or Video Camera

1.    Turn off the HDTV and...

English

English

19

English

English

TO USE THE MENUS
1.    Press the MENU button to display the 
main menu
2.    Use the Cursor Up/Down to select a 
menu item.
3.    Use the Cursor Left/Right to enter a 
submenu.
4.    Press the ENTER button to enable/disable 
the function.
5.    Press the MENU or EXIT button to exit 
the menu.
Press the MENU button to enter the main 
OSD (On Screen Display). Adjust the items 
including Setup menu, Video menu, Audio 
menu and Feature menu. However, some 
function...