AOC L42H961 User Manual

9
OPERATING INSTRUCTIONS
TO USE THE FRONT PANEL CONTROL
1
23
56
4
7
1VOL +VOL +: Press to increase the sound volume level.
2.VOL -VOL - : Press to decrease the sound volume level.
3.CH ▲CH +: Press to select the next higher Program number.
4.CH ▼CH - : Press to select the next lower Program number.
5.MENUMenu key: Press to open or exit the OSD (on-screen display) menu.
6.INPUTSource key: Press to select the input source.
7.  i POWER
Power key: Press to turn on / off (standby) the TV set. (Press to turn...

10
TO USE THE REMOTE CONTROL
POWER
Press to turn ON/OFF (standby) 
the TV. (Note: 1.TV is never 
completely powered off unless 
physically unplugged. 2. Press 
to turn on TV after the power 
on status, LED had changed 
to the Blue color and stopped 
flashing.)
SOURCE
Press repeatedly to choose the 
various input sources.
MUTE
Switch the sound ON/OFF.
0 ~ 9 /- number
Press to enter TV channel 
number to select channel (Press 
‘-’ to choose the sub-channel).
Press to display the previous 
channel
DISPLAY...

11
VIEWING MODELS ILLUSTRATIONS
Normal Mode 
The original content would be at the center of the screen.
16:9 Content
  
4:3 Content
Wide Mode
The original content in this mode has to fill the entire screen of the display.
16:9 Content
  
4:3 Content
ZOOM Mode
For those wide format images which are originally programmed into 4:3 frames with black 
bars around, this mode would stretch the image in both width and height for full display with 
active data.
  
Same image in ZOOM mode
CINEMA Mode
This mode is...

12
CONNECTING EQUIPMENT
Coaxial (RF)
Using Your Antenna or Digital Cable for 
DTV.
1.  Turn off the HDTV.
2.    Connect the coaxial (RF) connector from 
your antenna or digital cable (out-of-
the-wall, not from the Cable Box) to the 
ANTENNA/CABLE DIGITAL/ANALOG 
connector.
3.  Turn on the HDTV.
4.    Select TV using the SOURCE button on 
the remote, side of the HDTV or directly 
by pressing the TV button on the Remote 
Control.
Using Your Antenna or Cable for DTV.
1. Turn off the HDTV.
2.    Connect the...

13
Connecting Your HDTV Set-Top Box
Using HDMI
HDTV Set-Top Boxes that have a HDMI digital 
interface should be connected to the HDMI 
input of the LCD HDTV for optimal results.
Connecting your HDTV Set-Top Box 
(Best)
1.    Turn off the HDTV and HDTV Set-Top 
Box.
2.    Connect a HDMI cable to the HDMI 
output of your HDTV Set-Top Box and the 
other end to the HDMI Input at the rear 
of the HDTV.
3.    Turn on the HDTV and HDTV Set-Top 
Box.
4.    Select HDMI using the SOURCE button on 
the remote, side...

14
Using Component Video
Connecting your HDTV Set-Top Box 
(Better):
1.   Turn off the HDTV and HDTV Set-Top 
Box.
2.    Connect the Pr (red color) connector 
on your HDTV Set-Top Box to the 
corresponding Pr (red color) connector in 
the Component group. 
3.    Connect the Pb (blue color) connector 
on your HDTV Set-Top Box to the 
corresponding Pb (blue color) connector 
in the Component group. 
4.    Connect the Y (green color) connector 
on your HDTV Set-Top Box to the 
corresponding Y (green color)...

15
Using Coax (RF)
1.    Turn off the HDTV and Set-Top Box.
2.    Using a Coax (RF) cable, connect one end 
to the TV OUT (RF) on your Set Top Box 
and the other end to the TV input at the 
rear of the HDTV.
3.    Turn on the HDTV and Set-Top Box.
4.    Select TV using the SOURCE button on 
the remote, side of the HDTV or directly 
by pressing the TV button on the Remote 
Control.
 NOTE
   Refer to your Set Top Box user manual 
for more information about selecting the 
video or RF output of the...

16
Using Component Video
Connecting your DVD Player (Better)
1.    Turn off the HDTV and DVD player.
2.    Connect the Pr (red color) connector on 
your DVD player to the corresponding Pr 
(red color) connector in the Component 
at the rear of the HDTV.
3.    Connect the Pb (blue color) connector on 
your DVD player to the corresponding Pb 
(blue color) connector in the Component 
group at the rear of the HDTV.
4.    Connect the Y (green color) connector on 
your DVD player to the corresponding Y 
(green...

17
Using Composite (AV) Video
Connecting your DVD Player (Good)
1.    Turn off the HDTV and DVD player.
2.    Connect the Video (yellow color) 
connector on your DVD player to the 
Video (yellow color) connector in the AV 
group.
3.    Connect the R (red color) and L (white 
color) audio connectors on your DVD 
player to the corresponding R (red color) 
and L (white color) audio input connectors 
in the AV group.
4.    Turn on the HDTV and DVD Player.
5.    Select AV using the SOURCE button on 
the...

18
Connecting to a PC
1.    Turn off the HDTV and PC.
2.    Connect a 15-pin D-Sub RGB (VGA) cable 
to the RGB output of your PC and the 
other end to the VGA input at the rear of 
the HDTV.
3.    Connect the Audio Out on your computer 
to the AUDIO input at the rear of the 
HDTV.
4.  Turn on the HDTV and PC.
5.    Select VGA using the SOURCE button on 
the remote, side of the HDTV or directly 
by pressing the HDMI/PC button on the 
Remote.
 NOTE
   For the best picture quality when 
connecting a...