AOC L42H961 User Manual

TABLE OF CONTENT
DIGITAL TELEVISION TRANSITION NOTICE .......................................1
FOR YOUR SAFETY ........................................................................\
................2
PRECAUTIONS AND REMINDERS  ...........................................................3
IMPORTANT SAFETY INSTRUCTIONS ...................................................4
PACKAGE CONTENTS ........................................................................\
.........5
PREPARATION...

1
DIGITAL TELEVISION TRANSITION NOTICE
This device contains a digital television tuner, so it should receive digital over the air TV programming, 
with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 
12, 2009. Some older television receivers, if they rely on a TV antenna, will need a TV Converter to 
receive over the air digital programming, but should continue to work as before for other purposes (e.g., 
for watching low-power TV stations still...

2
NOTICE
1.    The changes or modifications not expressly approved by the party responsible for compliance could 
void the user's authority to operate the equipment.
2.    Shielded interface cables and AC power cord, if any, must be used in order to comply with the 
emission limits.
3.    The manufacturer is not responsible for any radio or TV interference caused by unauthorized 
modification to this equipment. It is the  responsibilities of the user to correct such interference.
NOTE: This equipment...

3
PRECAUTIONS AND REMINDERS
Place unit on even surfaces.
Unplug immediately if is 
malfunction like no picture, 
no video/audio,smoke and 
bad odor from TV.
Don't throw any object 
inside the TV box like 
metals or other flammable 
materials.
Don't place the TV in 
confined spaces or in a box 
when using it.
Unplug immediately if other 
foreign materials are put 
inside TV box or if the TV 
fell down.
Prohibit/Avoid opening TV 
cabinet.
Remember to unplug the 
AC cord from the AC outlet 
before...

4
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1.  Read these instructions.
2.  Keep these instructions.
3.  Heed all warnings.
4.  Follow all instructions.
5.  Do not use this apparatus near water.
6.  Clean only with a dry cloth.
7.    Do not block any of the ventilation openings. Install in accordance with the manufacturers 
instructions.
8.    Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat....

5

digital-to-analog converter boxes.
   CONSUMER ALERT – This television receiver has only an analog broadcast tuner and will require a 
converter box after  June 12,2009,to receive over-the-air broadcasts with an antenna because of the 
Nation's transition to digital broadcasting. Analog-only TVs should continue to work as before with 
cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products, For more 
information, call the Federal Communications Commission at...

6
PREPARATION
IMPORTANT: Do not apply pressure to the screen display area which may compromise the 
integrity of the display.  The manufacturer’s warranty does not cover user abuse or improper 
installations.
ATTACHING THE BASE
IMPORTANT: The Base of the HDTV must be assembled prior to usage.
1.    Place TV unit face down on a soft and flat surface 
(blanket, foam, cloth, etc.) to prevent any damage to 
the HDTV.
2.    Carefully align and insert the Base to the stand.
3.    Insert the screws to the...

7
3. Remote control:
    Remove the cover of the battery 
compartment. Insert the 2 batteries 
supplied (Type AAA 1.5V).
4. Power:
    Insert the power cord in the wall socket 
with AC power supply. You can see LED 
states at the front panel. If the LED color 
is Blue, means the TV set is power on. If 
the LED color is Red, which means this TV 
set is in standby state.
5. Turn the TV on:
    Press the POWER key on the Remote 
control or the side panel control knobs. 
The TV will be turned on in a minute...

8
PERIPHERAL CONNECTION GUIDE
3
4AC POWER
1.   HDMI – Connect the primary source for digital video such as a DVD multimedia player or 
set top box through this all digital connector. The white color band on the rear of the TV 
indicates this connection.
2. PC IN – Connect the video and audio cables from a computer here.
3.   AV IN (AV/S-VIDEO) – Connect the primary source for composite video devices, such as 
a VCR or video game. Use the white and red connectors to connect the external audio from 
the...