AOC E936swa User Manual

Setup Stand & Base 
Please setup or remove the base following the steps as below. 
 
Setup: 
 
Remove: 
 
 11
 

Adjusting Viewing Angle 
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitors angle to your 
own preference.   
Hold the stand so you will not topple the moni tor when you change the monitors angle.   
You are able to adjust the monitors angle from -5° to 20 °.   
 
 
NOTE: 
Do not touch the LCD screen when you change the a ngle. It may cause damage or break the LCD screen.
 12
 

Connecting the Monitor 
Cable Connections On Back of Monitor and Computer: 
 
1. Power   
2. Analog (DB-15 VGA cable)     
3. Audio   
   
To protect equipment, always turn off the PC and LCD monitor before connecting.   
 
1      Connect the power cable to the AC port on the back of the monitor.   
2      Connect one end of the 15-pin D-Sub cable to the back of the monitor and conn ect the other end to the 
computers D-Sub port.   
3      Connect the audio cable to audio in port on the back of the...

Wall Mounting 
Preparing to Install An Optional Wall Mounting Arm.   
 
This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this 
procedure. Follow these steps: 
 
1   Remove the base.  
2   Follow the manufacturers instructions to assemble the wall mounting arm.   
3      Place the wall mounting arm onto t he back of the monitor. Line up the holes of the arm with the holes in the 
back of the monitor.   
4      Insert the 4 screws into the holes and...

Adjusting 
Setting Optimal Resolution 
Windows Vista   
For Windows Vista: 
1 Click START.  
 
2 Click CONTROL PANEL. 
 
 
3 Click Appearance and Personalization.
 
 
4 Click Personalization 
 
 
 15
 

5 Click Display Settings. 
 
 
6 Set the resolution SLIDE-BAR to 1366 by 768.   
 
 16
 

Windows XP   
For Windows XP: 
1 Click START.   
 
 
2 Click SETTINGS. 
 
3 Click CONTROL PANEL. 
 
4 Click Appearance and Themes.
 
 
5 Double click DISPLAY. 
 
 
 17
 

6 Click SETTINGS. 
 
7 Set the resolution SLIDE-BAR to 1366 by 768.   
 
 
 
Windows ME/2000 
For Windows ME/2000: 
1 Click START. 
2 Click SETTINGS. 
3 Click CONTROL PANEL. 
4 Double click DISPLAY. 
5 Click SETTINGS. 
6 Set the resolution SLIDE-BAR to 1366 by 768. 
 18
 

Hotkeys 
 
Power 
Press to turn on or turn off the monitor. 
 
Menu / Enter     
    Press to activate OSD, then press Up or Down to navig ate through the functions. Once the desired function is 
highlighted, press the Menu button to activate the submenu.  In sub-menu, Press Up or Down to navigate through 
the functions. Once the desired function  is highlighted, press Up or Down button to change the setting. Select Exit 
icon then press Menu button to return to superior menu.  
4:3 or wide   / Up...

OSD Setting 
 
Basic and simple instruction on the control keys. 
 
 
When you press the MENU button on the front control of your monitor, the On DOWN Screen Display (OSD) Main 
Controls window will pop up and you can then start making  adjustments to your monitors various features. Use the 
UP  or  DOWN  keys to make your adjustments. Follow the steps below to activate the adjustment. 
 
1) Press the  MENU key to activate the OSD window. 
 
2) Press UP or  DOWN  to navigate through the functions. Once...