AOC E2239fwt User Manual

							
 41
4. Click Properties in the Monitor tab. If the Properties 
button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed,  as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.   
   
 
6. Check the Browse my computer for driver software che ckbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button,  then click on the Browse... button and then select the appropriate drive 
F:\Driver (CD-ROM Drive).   
8. Select your monitor model  and click on the Next button. 
9. Click Close  → Close  → OK  →  OK on the following screens displayed in sequence. 
 
						

							
 42
Windows 7 
1.Start Windows® 7 
 
2.Click on the Start button and then click on  Control Panel. 
 
 
3. Click on the  Display icon. 
 
 
4.Ckick on the  “Change display settings”  button.
  
 
 
 
						

							
 43
5.Click the “Advanced Settings” button.  
 
 
6.
Click the  “Monitor”  tab and then click the  “Properties” button. 
 
 
7.Click the “Driver” tab.   
 
 
						

							
 44
8. Open the Update Driver Software-Gener
ic PnP Monitor window by clicking on “Update Driver... “and then 
click the  Browse my computer for driver software  button.  
 
 
9. Select  Let me pick from a list of  device drivers on my computer .  
 
 
10. Click the “Have Disk”  button. Click on the  “Browse” button and navigate to the following directory:   
X:\Driver\module name    (where X is the drive letter designator for the CD-ROM drive). 
 
 
 
 
						

							
 45
11. Select the
 xxx.inf file and click the  “Open” button. Click the  “OK” button.  
 
12. Select your monitor model and click the  “Next” button. The files will be copi ed from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.   
 
14. Restart the system. The system will  automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.   
 
 
 
						

							
 46
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on  the monitor. To complete installation, please follow the installation 
guide.  
 
						

							
 
47
 
 
 
e-Saver 
 
Welcome to use AOC e-Saver monitor power management  software! The AOC e-Saver features Smart Shutdown 
functions for your monitors, allows your monitor to timely  shutdown when PC unit is at any status (On, Off, Sleep or 
Screen Saver); the actual shutdown time depends  on your preferences (see example below). 
Please click on driver/e-Saver/setup.ex e to start installing the e-Saver software, follow the install wizard to 
complete software installation. 
 
Under each of the four PC status, you  may choose from the pull-down menu the desired time (in minutes) for your 
monitor to automatically shutdown.  The example above illustrated:   
1)  The monitor will never shutdown when the PC is powered on.     
2)  The monitor will automatically shutdown  5 minutes after the PC is powered off. 
3)  The monitor will automatically shutdown 10  minutes after the PC is in sleep/stand-by mode. 
4)  The monitor will automatically shutdown  20 minutes after the screen saver appears.    
 
 
You can click “RESET” to set the e-Save r to its default settings like below. 
 
 
 
						

							
 48
SRS 
 
 
WOW HD™ significantly improves the playback quality  of audio, delivering a dynamic 3D entertainment 
experience with deep, rich bass and high frequency clarity for crisp detail. To complete installation, please follow 
the installation guide. 
 
 
						

							
TouchPal 
 
TouchPal can make your touch experience more  convenient  and more  easily. TouchPal including 3 applica
tions, they are “Touch  Assistant”, “Touch Launch” and “Gesture Application”. TouchPal can work well un
der  Windows XP, Windows Vista and Windows 7.   
Please make sure the touch monitor has  been connected with the PC USB port before install TouchPal. To com
plete installa tion, please follow the installation guide. 
 
 
 
 
49
 
						

							
 50
Troubleshoot 
 
Problem & Question  
Possible Solutions 
 
 
Power LED Is Not ON  
Make sure the power button is ON and the Power Cord is properly connected 
to a grounded power outlet and to the monitor.   
 
 
 
 
 
 
 
 
 
 
No images on the screen  
Is the power cord connected properly? 
Check the power cord connection and power supply. 
Is the cable connected correctly? 
(Connected using the D-sub cable) 
Check the DB-15 cable connection.    
(Connected using the DVI cable) 
Check the DVI cable connection.  
* DVI input is not available on every model. 
If the power is on, reboot the comput er to see the initial screen (the login 
screen), which can be seen. 
If the initial screen (the login screen) ap pears, boot the computer in the 
applicable mode (the safe mode for Windows ME/XP/2000) and then change 
the frequency of the video card. 
(Refer to the Setting t he Optimal Resolution) 
If the initial screen (the login screen) d oes not appear, contact the Service 
Center or your dealer. 
Can you see Input Not Supported on the screen? 
You can see this message when the signal from the video card exceeds the 
maximum resolution and frequency that the monitor can handle properly. 
Adjust the maximum resolution and fr equency that the monitor can handle 
properly. 
Make sure the AOC Monitor Drivers are installed. 
 
Picture Is Fuzzy & Has 
Ghosting Shadowing Problem     
Adjust the Contrast and Brightness Controls.   
Press to auto adjust.   
Make sure you are not using an ext
ension cable or switch box. We 
recommend plugging the monitor directly to the video card output connector 
on the back .   
 
Picture Bounces, Flickers Or 
Wave Pattern Appears In The 
Picture  Move electrical devices that may cause electrical interference as far away 
from the monitor as possible.   
Use the maximum refresh rate your monitor is capable of at the resolution 
your are using.