AOC E2239fwt User Manual

							
 11
Dual Stand 
In order to save desk space, notebook, key board and mouse can be put under Dual Stand when the display is 
boundled to them. For specific use, please see the following drawings. 
 
 
						

							
 12
Connecting the Monitor 
Cable Connections On Back of Monitor and Computer: 
 
1. Power   
2. USB   
3. USB   
4. Audio 
5. Analog 
6. HDMI 1 
7. USB 
8. HDMI 2 
 
   
To protect equipment, always turn off the PC and LCD monitor before connecting.   
 
1      Connect the power cable to the AC  port on the back of the monitor.   
2      Connect one end of the 15-pin D-Sub cable to t he back of the monitor and connect the other end to the 
computers D-Sub port.   
3      Connect the audio cable to audio in port on the back of the monitor.   
4      Connect one end of the HDMI cable to the back of th e monitor and connect the other end to the computer’s 
HDMI port. 
5   Turn on your monitor and computer.  
 
If your monitor displays an image, installation is comp lete. If it does not display an image, please refer 
Troubleshooting.
 
						

							
 13
Multi-touch Screen 
User can use Display Multi-touch Function under operating system higher than Window 7 home premium. Before 
using Display Multi-touch Function, user need to connect  basic wires ( power cable, VGA cable, USB cable). Then 
user can fully enjoy Multi-touch Function. Part of  specific use, please see the following drawings. 
 
 
						

							
 14
Adjusting 
Setting Optimal Resolution 
Windows Vista   
For Windows Vista: 
1 Click START.  
 
2 Click  CONTROL PANEL. 
 
 
3 Click  Appearance and Personalization.  
 
 
4 Click  Personalization   
 
 
 
						

							
 15
5 Click 
Display Settings.   
 
 
6 Set the resolution  SLIDE-BAR to 1920 by 1080 .  
 
 
						

							
 16
Windows XP   
For Windows XP: 
1 Click START.   
 
 
2 Click  SETTINGS. 
 
3 Click  CONTROL PANEL.   
 
4 Click  Appearance and Themes.  
 
 
5 Double click  DISPLAY.  
 
 
 
						

							
 17
6 Click 
SETTINGS. 
 
7 Set the resolution  SLIDE-BAR to 1920 by 1080 .  
 
 
 
Windows ME/2000 
For Windows ME/2000: 
1 Click  START.   
2 Click  SETTINGS.   
3 Click  CONTROL PANEL.   
4 Double click  DISPLAY.  
5 Click  SETTINGS.   
6 Set the resolution  SLIDE-BAR to 1920 by 1080 . 
 
						

							
 18
Hotkeys 
 
Power 
        Press to turn on or turn off the monitor. 
Source (4 : 3   or wide) / Up     
       Press 
key to change the screen aspect ratio between standard 4 ：3format or Wide format.    When the input 
resolution is wide format, the aspect ratio hotkey is disa bled. When the main menu or sub-menu is active, the 
key functions as to select up or increase value.       
Source hot key :  
When the OSD is closed, press 
button will be Source hot key function (Onl y for the models with dual or more 
inputs) .Press Source button continuously to select  the input source showed in the message bar , press 
Menu/Enter button to change to the source selected.  
Auto / Down    
      Auto configure hot key: When the OSD is clos ed, press Auto button to do auto configure.   
Vo l u m e  
Menu / Enter
Source (4:3 or wide) / Up 
Volume/ Auto / Down  
Power
 
						

							
 19
OSD Setting 
 
Basic and simple instruction on the control keys. 
 
 
When you press the MENU button on the fr ont control of your monitor, the On DOWN Screen Display (OSD) Main 
Controls window will pop up and you can then start making  adjustments to your monitors various features. Use the 
UP  or  DOWN  keys to make your adjustments. Follow the steps below to activate the adjustment. 
 
1) Press the  MENU key to activate the OSD window. 
 
2) Press  UP or  DOWN  to navigate through the functions. Once the des ired function is highlighted, press the MENU 
key to activate it. If the functi on selected has a sub-menu, press  UP or  DOWN  again to navigate through the 
sub-menu functions. Once the desired function is highlighted, press  MENU key to activate it. 
 
3) Press  UP or  DOWN  to change the settings of t he selected function. Press  MENU key to exit and save, select the 
exit function. If you want to adjust an y other function, repeat steps 2-3. 
 
4) OSD Lock Function: To lock the OSD, press and hold the  MENU key while the monitor is off and then press 
power button to turn the monitor on. To unlock the OSD, press and hold the  MENU key while the monitor is off and 
then press power button to turn the monitor on.
 
						

							
 20
Eco mode