AOC 2436vwa User Manual

							١١  | Page  
  HOTKEYS
 
   Power 
         Press to turn on or turn off the monitor. 
4:3 or wide  / Up   
                 Press key to change the screen aspect ratio between standard 4：3format or Wide format.   When the input resolution 
the main menu or sub-menu is active, the key functions as to select up or increase value.  
Auto / Down 
Auto configure hot key: When the OSD is closed, press Auto button to do auto configure. 
 
 
OSD SETTING 
 
 
						

							١٢  | Page  
 
  Eco mode ---DCR, Standard, Text, Internet, Game, Movie, Sports  
DCR 
 
 
Standard 
 
 
 
 
 
						

							١٣  | Page  
 
TEXT 
 
INTERNET 
 
Game 
 
 
						

							١۴  | Page  
 
Movie 
 
Sports 
 
 
 
 
Notes : When Eco mode is not set as “Standard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”,  
Contrast, Brightness, Eco mode and Gamma can not be adjusted.  
  
 
 
 
 
 
						

							١۵  | Page  
 
LED INDICATOR 
 
Status LED Color   
Full Power Mode Blue  
Active-off Mode Orange 
 
 
 
  
 
   
  
 
 
 
 
 
 
 
 
 
						

							١۶  | Page  
 
 
DRIVER INSTALLATION GUIDE 
Windows 2000 
1. Start Windows® 2000  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select Monitor  
- If the Properties button is inactive, it means your monitor is properly configured. Please stop 
installation.  
- If the Properties button is active. Click on Properties button. Please follow the steps given below.  
6. Click on Driver and then click on Update Driver... then click on the Next button.  
7. Select Display a list of the known drivers for this device so that I can choose a specific driver, then 
click on Next and then click on Have disk....  
8. Click on the Browse... button then select the appropriate drive F: ( CD-ROM Drive).  
9. Click on the Open button, then click on the OK button.  
10. Select your monitor model and click on the Next button.  
11. Click on the Finish button then the Close button.  
If you can see the Digital Signature Not Found window, click on the Yes button.  
Windows ME 
1. Start Windows® Me  
2. Click on the Start button, point to Settings, and then click on Control Panel.  
3. Double click on the Display Icon.  
4. Select the Settings tab then click on Advanced....  
5. Select the Monitor button, then click on Change... button.  
6. Select Specify the location of the driver(Advanced) and click on the Next button.  
7. Select Display a list of all the drivers in a specific location, so you can choose the driver you want, 
then click on Next and then click on Have Disk....  
8. Click on the Browse... button, select the appropriate drive F: ( CD-ROM Drive) then click on the OK 
button.  
9. Click on the OK button, select your monitor model and click on the Next button.  
10. Click on Finish button then the Close button.  
Windows XP 
1. Start Windows® XP  
2. Click on the Start button and then click on Control Panel.  
  
 
						

							١٧  | Page  
 
 
 
3. Select and click on the category ‘Appearance and Themes’ 
  
 
4. Click on the Display Item.  
  
 
5. Select the Settings tab then click on the Advanced button.  
  
 
 
						

							١٨  | Page  
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your monitor is properly configured. Please stop 
installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.  
  
 
7. Click on the Driver tab and then click on Update Driver... button.  
8. Select the Install from a list or specific location [advanced] radio button and then click on the Next 
button.  
  
 
						

							١٩  | Page  
 
 
9. Select the Dont Search. I will choose the driver to install radio button. Then click on the Next button.  
  
 
10. Click on the Have disk... button, then click on the Browse... button and then select the appropriate 
drive F: (CD-ROM Drive).  
  
11. Click on the Open button, then click the OK button.  
12. Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing to verify its compatibility with Windows® 
XP message, please click on the Continue Anyway button.  
13. Click on the Finish button then the Close button.  
14. Click on the OK button and then the OK button again to close the Display_Properties dialog box.  
 
 
 
 
 
 
						

							٢٠  | Page  
 
Windows Vista 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
  
2. Click Personalization and then Display Settings. 
 
3. Click Advanced Settings....