AOC 2436vwa User Manual

٢١  | Page  
 
4. Click Properties in the Monitor tab. If the Properties button is deactivated, it means the 
configuration for your monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed, as shown in the figure below, click Continue. 
 
5. Click Update Driver... in the Driver tab.  
 
 
6. Check the Browse my computer for driver software checkbox and click Let me pick from a list of 
device drivers on my computer. 
  
 

٢٢  | Page  
 
6.  Click on the Have disk... button, then click on the Browse... button and then select the appropriate 
drive F:\Driver (CD-ROM Drive).  
8. Select your monitor model and click on the Next button. 
9. Click Close → Close → OK → OK on the following screens displayed in sequence.  
 
 
 
I_MENU 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen 
menus instead of the OSD button on the monitor. Please click here
 to setup the...

٢٣  | Page  
 
PRODUCT INFORMATION 
 
LCD Panel  
model name 2436Vwa 
Driving system  TFT Color LCD  
Viewable Image Size 598.09mm diagonal 
Pixel pitch  0.2715mm(H) x 0.2715mm(V) 
Video  R, G, B Analog lnterface & Digital Interface 
Separate Sync.  H/V TTL 
Display Color  16.7M Colors  
Dot Clock  148.5 MHz  
Resolution  
Horizontal scan range  30 kHz - 80 kHz 
Horizontal scan 
Size(Maximum)  521.28mm 
Vertical scan range  55 Hz - 75 Hz  
Vertical scan 
Size(Maximum)  293.22mm  
Optimal preset...

٢۴  | Page  
 
Preset Display Modes  
 
STAND RESOLUTION  
HORIZONTAL  
FREQUENCY(kHZ) 
VERTICAL  
FREQUENCY(Hz) 
VGA 640×480 @60Hz 31.469  59.940  
VGA 640×480 @67Hz  35.000  66.667  
VGA 640×480 @72Hz  37.861  72.809  
VGA 640×480 @75Hz  37.500  75.000  
Dos-mode 720×400 @70Hz  31.469  70.087  
SVGA 800×600 @56Hz  35.156  56.250  
SVGA 800×600 @60Hz  37.879  60.317  
SVGA 800×600 @72Hz 48.077  72.188  
SVGA 800×600 @75Hz  46.875  75.000  
SVGA 832×624 @75Hz  49.725  74.550  
XGA 1024×768 @60Hz   48.363...

٢۵  | Page  
 
Pin Assignments 
 
 
Pin Number 15-Pin Side of the Signal Cable 
1 Video-Red 
2 Video-Green 
3 Video-Blue 
4 N.C. 
5 Detect Cable 
6 GND-R 
7 GND-G 
8 GND-B 
9 +5V 
10 Ground 
11 N.C. 
12 DDC-Serial data 
13 H-sync 
14 V-sync 
15 DDC-Serial clock 
PLUG & PLAY 
Plug & Play DDC2B Feature 
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. 
 It allows the monitor to inform the host system of its identity and, depending on the level of DDC used,...

٢۶  | Page  
 
TROUBLESHOOT 
Problem & 
Question Possible Solutions 
Power LED Is 
Not ON 
 Make sure the power button is ON and the Power Cord is properly connected to a 
grounded power outlet and to the monitor.  
No images on 
the screen 
Is the power cord connected properly? 
  Check the power cord connection and power supply. 
Is the cable connected correctly? 
  
(Connected using the D-sub cable) 
Check the DB-15 cable connection.   
(Connected using the DVI cable) 
Check the DVI cable connection....

٢٧  | Page  
 
look white) 
Horizontal or 
vertical 
disturbances on 
the screen 
 Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and FOCUS.  
 Press to auto-adjust.