AOC 2341va User Manual

							
 41
10. Click the 
“Have Disk”  button. Click on the  “Browse” button and navigate to the following directory:   
X:\Driver\module name    (where X is the drive letter designator for the CD-ROM drive). 
 
 
 
11. Select the  xxx.inf file and click the  “Open” button. Click the  “OK” button.  
 
12. Select your monitor model and click the  “Next” button. The files will be copi ed from the CD to your hard disk 
drive.  
 
13. Close all open windows and remove the CD.   
 
14. Restart the system. The system will  automatically select the maximum refresh rate and corresponding Color 
Matching Profiles.   
 
 
 
 
 
 
 
 
 
						

							
 42
Windows Vista 
 
1. Click Start  and Control Panel. Then, double-click on Appearance and Personalization. 
    
  
2. Click Personalization and then Display Settings. 
   
 
3. Click Advanced Settings.... 
    
 
 
						

							
 43
4. Click Properties in the Monitor tab. If the Properties 
button is deactivated, it means the configuration for your 
monitor is completed. The monitor can be used as is. 
If the message Windows needs... is displayed,  as shown in the figure below, click Continue. 
   
 
5. Click Update Driver... in the Driver tab.   
   
 
6. Check the Browse my computer for driver software che ckbox and click Let me pick from a list of device drivers 
on my computer. 
 
 
7. Click on the Have disk... button,  then click on the Browse... button and then select the appropriate drive 
F:\Driver (CD-ROM Drive).   
8. Select your monitor model  and click on the Next button. 
9. Click Close  → Close  → OK  →  OK on the following screens displayed in sequence.
 
						

							
 44
Windows XP 
 
1. Start Windows® XP   
2. Click on the Start button and then click on Control Panel.   
 
 
3. Select and click on the category ‘Appearance and Themes’ 
 
 
4. Click on the Display Item.   
 
    
 
						

							
 45
5. Select the Settings tab then
 click on the Advanced button.   
 
 
6. Select Monitor tab 
- If the Properties button is inactive, it means your m onitor is properly configured. Please stop installation. 
- If the Properties button is active, click on Properties button. 
Please follow the steps below.   
 
 
7. Click on the Driver tab and then  click on Update Driver... button.   
 
   
 
						

							
 46
8. Select the Install from a list or specific location [
advanced] radio button and then click on the Next button.   
 
 
9. Select the Dont Search. I will choose the driver to  install radio button. Then click on the Next button.   
 
 
10. Click on the Have disk... button,  then click on the Browse... button and  then select the appropriate drive F: 
(CD-ROM Drive).   
 
11. Click on the Open button, then click the OK button.   
12. Select your monitor model and click on the Next button. 
- If you can see the has not passed Windows® Logo testing  to verify its compatibility with Windows® XP message, 
please click on the Continue Anyway button.   
13. Click on the Finish butto n then the Close button.   
14. Click on the OK button and then the OK button  again to close the Display Properties dialog box. 
 
						

							
 47
Windows 2000 
 
1. Start Windows® 2000   
2. Click on the Start button, point to Settings, and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advanced....   
5. Select Monitor   
- If the Properties button is inactive, it means your moni tor is properly configured. Please stop installation.   
- If the Properties button is active. Click on Properti es button. Please follow the steps given below.   
6. Click on Driver and then cl ick on Update Driver... then c lick on the Next button.   
7. Select Display a list of the known dr ivers for this device so that I can choose  a specific driver, then click on Next 
and then click on Have disk....   
8. Click on the Browse... button then select  the appropriate drive F: ( CD-ROM Drive).   
9. Click on the Open button, t hen click on the OK button.   
10. Select your monitor model and click on the Next button.   
11. Click on the Finish button then the Close button.   
If you can see the Digital Signature Not Found window, click on the Yes button.   
 
 
 
Windows ME 
 
1. Start Windows® Me   
2. Click on the Start button, point to S ettings, and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advanced....   
5. Select the Monitor button,  then click on Change... button.   
6. Select Specify the location of the driv er(Advanced) and click on the Next button.   
7. Select Display a list of all the driv ers in a specific location, so you can c hoose the driver you want, then click on 
Next and then click on Have Disk....   
8. Click on the Browse... button, select  the appropriate drive F: ( CD-ROM Drive) then click on the OK button.   
9. Click on the OK button, select your moni tor model and click on the Next button.   
10. Click on Finish button then the Close button.   
 
						

							
 48
i-Menu 
 
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on 
screen menus instead of the OSD button on  the monitor. To complete installation, please follow the installation 
guide.  
 
						

							
 49
Troubleshoot 
 
Problem & Question  
Possible Solutions 
 
 
Power LED Is Not ON  
Make sure the power button is ON and the Power Cord is properly connected 
to a grounded power outlet and to the monitor.   
 
 
 
 
 
 
 
 
 
 
No images on the screen  
Is the power cord connected properly? 
Check the power cord connection and power supply. 
Is the cable connected correctly? 
(Connected using the D-sub cable) 
Check the DB-15 cable connection.    
(Connected using the DVI cable) 
Check the DVI cable connection.  
* DVI input is not available on every model. 
If the power is on, reboot the comput er to see the initial screen (the login 
screen), which can be seen. 
If the initial screen (the login screen) ap pears, boot the computer in the 
applicable mode (the safe mode for Windows ME/XP/2000) and then change 
the frequency of the video card. 
(Refer to the Setting t he Optimal Resolution) 
If the initial screen (the login screen) d oes not appear, contact the Service 
Center or your dealer. 
Can you see Input Not Supported on the screen? 
You can see this message when the signal from the video card exceeds the 
maximum resolution and frequency that the monitor can handle properly. 
Adjust the maximum resolution and fr equency that the monitor can handle 
properly. 
Make sure the AOC Monitor Drivers are installed. 
 
Picture Is Fuzzy & Has 
Ghosting Shadowing Problem     
Adjust the Contrast and Brightness Controls.   
Press to auto adjust.   
Make sure you are not using an ext
ension cable or switch box. We 
recommend plugging the monitor directly to the video card output connector 
on the back .   
 
Picture Bounces, Flickers Or 
Wave Pattern Appears In The 
Picture  Move electrical devices that may cause electrical interference as far away 
from the monitor as possible.   
Use the maximum refresh rate your monitor is capable of at the resolution 
your are using.   
 
						

							
 50
 
 
 
 
Monitor Is Stuck In Active 
Off-Mode 
 
The Computer Power Switch should be in the ON position.   
The Computer Video Card should be snugly fitted in its slot.   
Make sure the monitors video cable is properly connected to the computer. 
Inspect the monitors video cable and make sure no pin is bent.   
Make sure your computer is operational by hitting the CAPS LOCK key on 
the keyboard while observing the CAPS 
LOCK LED. The LED should either 
turn ON or OFF after hitting the CAPS LOCK key.   
 
Missing one of the primary 
colors (RED, GREEN, or 
BLUE)   
Inspect the monitors video cable and make sure that no pin is damaged.   
Make sure the monitors video cable is properly connected to the computer. 
 
Screen image is not centered 
or sized properly 
 
Adjust H-Position and V-Position or press hot-key (AUTO).   
 
Picture has color defects 
(white does not look white)  
Adjust RGB color or select desired color temperature.   
 
Horizontal or vertical 
disturbances on the screen  
Use Windows 95/98/2000/ME/XP sh
ut-down mode Adjust CLOCK and 
FOCUS.  
Press to auto-adjust.