AOC 2216va User Manual

							 
       DCC: Dynamic color control  
       ICM: Intelligent color management    
1) How to use Color Boost?   
 
YCM adjustment:  In addition to the basic R (red), G (green), B (bl ue) color adjustments, Color Boost has added Y (yel low), C (cyanine), 
and M (magenta) for more color fine-tuning options.  YCM adjustments are in the third icon labeled Color Temperature in the OSD menu. 
When adjusting YCM values, RGB values will also be  changed automatically due to the color correlation between RGB and YCM.   
 
 
   
						

							 Five color-enhancement settings:   
To accommodate various display needs, Color Boost a lso offers 5 different color enhancement modes: Full 
Enhance, Natural Skin, Green Field, Sky Blue, and A uto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the f ive 
settings you desire to be turned on. 
 
   
  
Full Enhance:    When Full Enhance is turned on, the color satur ation of the entire screen is fully enriched, thus all colors become more 
vibrant.   
 
   
						

							 Nature Skin:    When Natural Skin is turned on, the red and yel low colors are enriched automatically, thus present s human skin with 
more natural and truer colors. Natural Skin setti ng is ideal for viewing human portrait and detailed  skin texture.   
 
  Green Field:      When Green Field is turned on, the green colo r is enriched so that football field and mountain landscape would look 
more natural and fresh. “Green Field” setting is id eal for watching mountain scenery and outdoor sport s.   
 
   
						

							 Sky Blue:     WhenSky Blue is turned on, the color blue is b eing fine-tuned so that the sky or ocean landscape  will look more vivid and 
in-depth. Sky Blue setting is ideal for viewing s ky and ocean images.   
 
    
Auto Detect:     When “Auto Detect” is turned on, every pigment w ill be detected and self-adjusted to render a lively picture.   
 
Demo:      Screen divided into two for demonstration purpo ses.   
  
   
						

							  
2) How to use Picture Boost?  
Users can change the color settings of a self-selec ted zone on the screen. The size and position of the selected zone can also be adjusted. 
Picture Boost is located in the fifth icon labele d Picture Boost in the OSD menu. Turn on Bright  Frame to select a zone on the screen 
to be enhanced. Please note when adjust or turn on  any one of the DCB features, the rest of color settings including DCR will be disabled 
or return to default.   
 
  Disclaimer:  DCB aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above 
illustrations.   
    DCR Adjustment    
 
   
						

							 What is DCR?   
Dynamic Contrast Ratio (DCR) auto adjusts the brigh tness of the screen so users can see the darker areas of the displayed content in 
more depths. By increasing the darkness of the dark  areas and the brightness of the bright areas, contrast ratio is uplifted to exceed 
2000:1. DCR value varies subject to the original CR  values of the LCD module. The higher the original CR, the higher DCR can be 
achieved. DCR is great for watching movie or video  contents.   
   
How to Use DCR?   
Go to the first OSD icon labeled Luminance, turn  on or off DCR as desires. DCR boosts the contrasts  between lightness & darkness and 
enables the viewer to see more layers and details o f the picture, especially in the darker areas. Please note when DCR is on, DCB will be 
disabled. 
 
  
  
						

							DCR Demos: 
 
Disclaimer:  DCR aftereffects are subject to the resolution and  quality of the display content, hence may look different than the above 
illustrations.     Function Control Illustration 
 
Luminance    Adjust Range    Description   Brightness    0-100    Backlight Adjustment   Contrast    0-100    Contrast from Digital-register. Eco mode        Standard  Standard Mode   
Text  Text Mode Internet  Internet Mode Game  Game Mode   Movie  Movie Mode Sports  Sports Mode 
Gamma    Gamma1  Adjust to Gamma1 
Gamma2  Adjust to Gamma 2 Gamma3  Adjust to Gamma 3   
DCR    Off  Disable dynamic contrast ratio 
On  Enable dynamic contrast ratio 
  
						

							 
Image Setup       Clock    0-100    Adjust picture Clock to reduce Vertical-Line noise.   Focus    0-100    Adjust Picture Phase to reduce Horizo ntal-Line noise   H.Position    0-100    Adjust the verticalposition of the picture.   V.Position    0-100    Adjust the horizontal position o f the picture.   
 
Color Temp.       Warm      Recall Warm Color Temperature from EEPROM.   Normal      Recall Normal Color Temperature from EEPRO M.   Cool      Recall Cool Color Temperature from EEPROM.   sRGB      Recall SRGB Color Temperature from EEPROM.   User    User-B  Blue Gain from Digital-register   
User-G  Green Gain Digital-register.   User-R  Red Gain from Digital-register   User-Y  Yellow Gain from Digital-register   User-C  Cyan Gain from Digital-register   User-M  Magenta Gain from Digital-register   
 
Color Boost       Full Enhance    on or off  Disable or Enable Full Enhance Mode Nature Skin    on or off  Disable or Enable Nature Ski n Mode Green Field    on or off  Disable or Enable Green Field Mode Sky-blue    on or off  Disable or Enable Sky-blue Mode  AutoDetect    on or off  Disable or Enable AutoDetect Mode Demo    on or off  Disable or Enable Demo   
     Picture Boost       
Frame Size    0-100    Adjust Frame Size   Brightness    0-100    Adjust Frame Brightness   Contrast    0-100    Adjust Frame Contrast   Hue    0-100    Adjust Frame Hue Saturation    0-100    Adjust Frame Saturation   Position    H. position    Adjust Frame horizontal Posi
tion 
V.position  Adjust Frame vertical Position 
Bright Frame    on or off    Disable or Enable Bright Frame   OSD Setup       
 
						

							H.Position    0-100    Adjust the verticalposition of OSD V.Position    0-100    Adjust the horizontal position o f OSD Timeout    0-100    Adjust the OSD Timeout   Language      Select the OSD language   
 
Extra       Input Select  Digital  Select Digital Sigal Source as Input 
Analog  Select Analog Sigal Source as Input 
Auto Config    yes or no    Auto adjust the picture to default   Reset    yes or no  Reset the menu to default   DDC-CI     Turn ON/OFF DDC-CI Support Information      Show the information of the main imag e and sub-image 
source   
LED Indicators Status   LED Color Full Power Mode  Green or Blue   Active-off Mode  Orange or red     
5. Drivers Windows 2000  
1. Start Windows® 2000    
2. Click on the Start button, point to Settings , and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advance d....   
5. Select Monitor   
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation.   
 
						

							- If the Properties button is active. Click on Properties button. Please follow the steps given be low.   
6. Click on Driver and then click on Update Driv er... then click on the Next button.   
7. Select Display a list of the known drivers for  this device so that I can choose a specific driver , then click on Next and then click 
on Have disk....    
8. Click on the Browse... button then select the  appropriate drive F: ( CD-ROM Drive).   
9. Click on the Open button, then click on the O K button.   
10. Select your monitor model and click on the Nex t button.   
11. Click on the Finish button then the Close b utton.   
If you can see the Digital Signature Not Found wi ndow, click on the Yes button.   
Windows ME  
1. Start Windows® Me   
2. Click on the Start button, point to Settings , and then click on Control Panel.   
3. Double click on the Display Icon.   
4. Select the Settings tab then click on Advance d....   
5. Select the Monitor button, then click on Chan ge... button.   
6. Select Specify the location of the driver(Advan ced) and click on the Next button.   
7. Select Display a list of all the drivers in a s pecific location, so you can choose the driver you  want, then click on Next and then 
click on Have Disk....   
8. Click on the Browse... button, select the appr opriate drive F: ( CD-ROM Drive) then click on the  OK button.   
9. Click on the OK button, select your monitor mo del and click on the Next button.   
10. Click on Finish button then the Close butto n.   
Windows XP  
1. Start Windows® XP   
2. Click on the Start button and then click on C ontrol Panel.   
3. Select and click on the category Printers and O ther Hardware   
4. Click on the Display Item.   
5. Select the Settings tab then click on the Adv anced button.   
6. Select Monitor tab 
- If the Properties button is inactive, it means  your monitor is properly configured. Please stop in stallation. 
- If the Properties button is active, click on P roperties button.