Antares MDT user manual

MDT UserÕs Manual71 Clip Sentry
and a gain decrease indicated by the I/O Curve results in a gain decrease in
the overall output.
In this way, the AP Þlter modes are able to accomplish compression and
expansion computations without artifacts from the parametric equalizer
Þlters.
However, these effects are limited to the I/O Curve operating within plus
and minus 12 dB of the 45 degree 1:1 diagonal. Operating above +12 dB of
the diagonal causes the parametric equalizer artifacts to again dominate the
output...

MDT UserÕs Manual72 Stereo Sound Processing
The current gain is a combination of gain from the gain curve and the gain
slider. The Clip Sentry processing occurs in the sequence described in the
diagram:
From this diagram, you see that the Gain Curve is broken up into two parts.
The Þrst part is a new curve that has gain reduction only. This reduction is
compensated for by the second part, a gain increase after Clip Sentry.
Hence, the data coming into Clip Sentry is never clipped. The only existing...

MDT UserÕs Manuallxxiii
Symbols
ÒSoft KneeÓ Compressor 17
Òsoft kneeÓ compressor 36
ÒTubeÓ Compander 18, 36
ÒtubeÓ companders 37
Numerics
3 Band 56
3 band 68
3 Band AP 57
3 band AP 70
5 Band 57, 68
5 Band AP 57, 70
A
AP Filter Modes 70
AP mode 40
Attack Slider 53
Attack Time 31
attack time 19
auto read 50
auto touch 50
Automation 49, 53
B
Bypass Button 54
C
Clip 48
clip light 48
Clip Sentry 48, 71
Clip Sentry Buf Len 48
Clip Sentry Buf Len (mS) slider 55
Clip Sentry Button 54
Clip Sentry Release 48
Clip...

lxxivMDT UserÕs Manual
digital Þlters 40
DSP Plug-ins 22
Dynamic EQ 47
dynamic range 13, 30
E
effect of changing attack time 19
effect of changing release time 19
Expander/Gate 34
expansion 18
F
Filter Mode Menu 56
Filter Modes 40, 68
Þlter pass band center frequencies 69
Flat 43
Flat Button 58
Flat button 49
Full Band 56
Full Band Filter Mode 68
G
Gain Adjust Algorithm 65
gain reduction 14, 30
Gain Slider 58
Gain slider 31
H
high speed digital limiter 48
I
I/O Curve 23, 25, 66
I/O Curve position and...

MDT UserÕs Manuallxxv
M
MDT As A  Compressor 15
MDT Basics 21
mixing 13
Multiband Applications 39
multiband center frequencies 69
Multiband Compressor 40
multiband mode 39
Multiband Peak Level Indicators 39
O
Owner Registration 11
P
Peak Level Indicator 22, 28
processing algorithms 65
pumping 19
R
Ratio 14
Release Time 31
release time 19, 22
Reset 43
Reset Button 61
Reset button 49
Reset Settings 29
S
Save Settings AsÉ 29
Setting Menu 28
Settings menu 49
Single Band Applications 30
Spectral Enhancer 45,...

lxxviMDT UserÕs Manual
V
Variable 43, 44
Variable Button 63
Variable button 49