Home
>
Anschutz
>
Small Bore Rifle
>
Anschutz Small Bore Rifle Biathlon Small Bore Target Rifle 1827 F User Manual
Anschutz Small Bore Rifle Biathlon Small Bore Target Rifle 1827 F User Manual
Have a look at the manual Anschutz Small Bore Rifle Biathlon Small Bore Target Rifle 1827 F User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 28 Anschutz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 21
16 Buttplate
16.1 Removing the buttplate
X Release the clamping screw [x].
X Remove the buttplate [16] from the holder.
X Fit in reverse order.
16.2 Adjusting the buttplate
X Release clamping screws [x] and [z].
X Turn the knurled screws [y] until the desired tilt and length are achieved.
X Move the buttplate [16] up or down until the desired height is set.
X Retighten the clamping screws [x] and [z] hand tight.
I If just clamping screw [z] is released, only the height of the butt...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-20.png "Page 21
16 Buttplate
16.1 Removing the buttplate
X Release the clamping screw [x].
X Remove the buttplate [16] from the holder.
X Fit in reverse order.
16.2 Adjusting the buttplate
X Release clamping screws [x] and [z].
X Turn the knurled screws [y] until the desired tilt and length are achieved.
X Move the buttplate [16] up or down until the desired height is set.
X Retighten the clamping screws [x] and [z] hand tight.
I If just clamping screw [z] is released, only the height of the butt...")
![Page 22
[1][2] [3][4]
[5] [6]
[7]
[8]
Fig.24 Trigger
Key (to Fig. 24)
1
First stage adjusting screw
2 Second stage adjusting screw
3 Trigger blade
4 Trigger stop adjusting screw
5 First stage pull adjusting screw
6 Trigger weight adjusting screw
7 Trigger cam
8 Firing pin
1 Trigger weight
Adjusting the trigger weight by means of adjusting screw [6]:
y turn clockwise = trigger weight is increased (+)
y turn anticlockwise = trigger weight is reduced (–)
The trigger and first stage weights are mechanically...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-21.png "Page 22
[1][2] [3][4]
[5] [6]
[7]
[8]
Fig.24 Trigger
Key (to Fig. 24)
1
First stage adjusting screw
2 Second stage adjusting screw
3 Trigger blade
4 Trigger stop adjusting screw
5 First stage pull adjusting screw
6 Trigger weight adjusting screw
7 Trigger cam
8 Firing pin
1 Trigger weight
Adjusting the trigger weight by means of adjusting screw [6]:
y turn clockwise = trigger weight is increased (+)
y turn anticlockwise = trigger weight is reduced (–)
The trigger and first stage weights are mechanically...")
![Page 23
Setting the optimum sear engagement:
I The rifle must be unloaded.
X Cock the rifle and release the trigger (check whether the trigger releases
as desired).
If the sear engagement is too long:
There is a short travel from the second stage to the release of the trigger (so-
called "pull" or "tug").
X After cocking and releasing the trigger, turn adjusting screw [2] clockwise
in steps (approx.
1/8 turn each time).
X Repeat the procedure until the second stage is no longer...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-22.png "Page 23
Setting the optimum sear engagement:
I The rifle must be unloaded.
X Cock the rifle and release the trigger (check whether the trigger releases
as desired).
If the sear engagement is too long:
There is a short travel from the second stage to the release of the trigger (so-
called \"pull\" or \"tug\").
X After cocking and releasing the trigger, turn adjusting screw [2] clockwise
in steps (approx.
1/8 turn each time).
X Repeat the procedure until the second stage is no longer...")
![Page 24
4 First stage travel (only with two-stage triggers)
First stage travel denotes the travel of the trigger blade from the zero position to
the second stage.
Setting the first stage travel by means of adjusting screw [1]:
y turn clockwise = first stage travel is shortened
y turn anticlockwise = first stage travel is lengthened
Danger to life!
The first stage travel adjusting screw is set beyond the second
stage function.
h Never turn the first stage travel adjusting screw beyond
the second stage...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-23.png "Page 24
4 First stage travel (only with two-stage triggers)
First stage travel denotes the travel of the trigger blade from the zero position to
the second stage.
Setting the first stage travel by means of adjusting screw [1]:
y turn clockwise = first stage travel is shortened
y turn anticlockwise = first stage travel is lengthened
Danger to life!
The first stage travel adjusting screw is set beyond the second
stage function.
h Never turn the first stage travel adjusting screw beyond
the second stage...")
![Page 25
7 Converting a two-stage trigger to a single stage trigger
Adjustments:
y Turn the screw for the first stage travel [1] anticlockwise until the maximum
first stage length has been set.
y Cock
y Turn adjusting screw [2] (second stage) antickockwise until the
trigger releases.
y From this setting, turn adjusting screw [2] approx.
1/4 turn
clockwise.
9 The trigger is now adjusted for single stage; there is no longer
any first stage travel.
Danger to life from automatic firing!
Automatically...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-24.png "Page 25
7 Converting a two-stage trigger to a single stage trigger
Adjustments:
y Turn the screw for the first stage travel [1] anticlockwise until the maximum
first stage length has been set.
y Cock
y Turn adjusting screw [2] (second stage) antickockwise until the
trigger releases.
y From this setting, turn adjusting screw [2] approx.
1/4 turn
clockwise.
9 The trigger is now adjusted for single stage; there is no longer
any first stage travel.
Danger to life from automatic firing!
Automatically...")
![Page 26
The trigger does not catch the firing pin:
y Adjustiing screw [1] (first stage) is screwed in several turns too far.
y Check that the tension spring is not damaged and is fitted correctly.
The single stage trigger is set too tight:
y Turn adjusting screw [2] clockwise in
1/4 turn steps until the firing pin [8] is
caught.
The catch link return spring is too weak or is defective:
y The trigger must be returned to the factory for repair.
18 Dry firing device
The length of the firing pin is...](http://img.usermanuals.tech/thumb/433/6662/w64_small-bore-rifle-biathlon-small-bore-target-rifle-1827-f-1479120301_d-25.png "Page 26
The trigger does not catch the firing pin:
y Adjustiing screw [1] (first stage) is screwed in several turns too far.
y Check that the tension spring is not damaged and is fitted correctly.
The single stage trigger is set too tight:
y Turn adjusting screw [2] clockwise in
1/4 turn steps until the firing pin [8] is
caught.
The catch link return spring is too weak or is defective:
y The trigger must be returned to the factory for repair.
18 Dry firing device
The length of the firing pin is...")
23 Disposal Disposal of the rifle must be carried out and certified by a specialist dealer or gunsmith. 24 Miscellaneous Additional information is available on the Internet at www.anschuetz-sport.com. ANSCHÜTZ provides news concerning this and other products in the ANSCHÜTZ Newsletter, which you can sign up to for free on the Internet. The original group for your rifle at 50 m is affixed to the CD case. www.anschuetz-sport.com 25 Guarantee 31 > 1. Material: This product has been released for sale after the product itself, its materials and individual components have been subjected to strict inspection, or the ri e has demonstrated its durability and function during test shooting. J.G. ANSCHÜTZ GmbH & Co. KG offers a full guarantee covering material and manufacturing faults (excluding broken stocks and springs) for a period of two years, provided that the fault can be shown to have been present at the time of handover of the product. No warranty claims will be accepted by J.G. ANSCHÜTZ GmbH & Co. KG for faults that are the result of improper use or unauthorised repairs. The item will either be repaired or replaced at our discretion. Claims for compensation - put forward for any legal reason whatsoever – are excluded. 2. Shooting Performance: The purchaser undertakes to inform J.G. ANSCHÜTZ GmbH & Co. KG in writing of any faults detected in shooting performance within one month of purchase with the submission of their own shooting record. J.G. ANSCHÜTZ GmbH & Co. KG reserves the right to transfer the ri e to an independent agency for inspection (DEVA or a national ballistics of ce). Should such an agency con rm excellent shooting performance, J.G. ANSCHÜTZ GmbH & Co. KG is entitled to charge the purchaser the costs of the ri e inspection. The accepted warranties do not apply to ri e damage resulting from mechanical effects and improper use or care by the purchaser. The warranty is excluded if the ri e has been repaired or modi ed by unauthorised persons. Likewise, the warranty is cancelled when using reloaded ammunition or ammunition which is not CIP approved. In the event of a warranty/damage claim please enclose this card, completed and signed by your dealer, with the product. J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und Sportwaffenfabrik Daimlerstrasse 12 · D-89079 Ulm/Germany · www.anschuetz-sport.com SERIAL-NO.: DATE: THIS ITEM WAS PURCHASED FROM: (Stamp or sales reciept.)