Anschutz LaserPower III Laser Rifle User Manual
Have a look at the manual Anschutz LaserPower III Laser Rifle User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 28 Anschutz manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 12
12
Insert the batteries (depending on the modell**)
Battery compartment [17] (on the back of the target box).
Remove the battery compartment cover [23] (slotted hole rubber grommet).
Fig. 13 Battery compartment with cover on the LaserPower target box Fig. 14 Battery compartment cover
INSTRUCTION !
The battery must be removed for extended periods of
non-use of the LaserPower target box in order to prevent
damage caused by leaking or corroding of the battery.
INSTRUCTION !
The service life...](http://img.usermanuals.tech/thumb/433/6668/w64_laserpower-iii-laser-rifle-1479123241_d-11.png "Page 12
12
Insert the batteries (depending on the modell**)
Battery compartment [17] (on the back of the target box).
Remove the battery compartment cover [23] (slotted hole rubber grommet).
Fig. 13 Battery compartment with cover on the LaserPower target box Fig. 14 Battery compartment cover
INSTRUCTION !
The battery must be removed for extended periods of
non-use of the LaserPower target box in order to prevent
damage caused by leaking or corroding of the battery.
INSTRUCTION !
The service life...")
![Page 14
14
7.4 Power cable
Another way of supplying power to the
LaserPower target is by using an external
pluggable power unit [21]. The power unit
can be used even when a battery is inserted.
The technical specifications of the
power unit must satisfy the following
requirements:
• Nominal voltage: 5 V; 1.0 A
• Voltage type: DC (observe following character: )
• Current capacity: 1,0 A
• Plug connection: Coaxial power connector with
(where possible injection moulded) plug
CAUTION...](http://img.usermanuals.tech/thumb/433/6668/w64_laserpower-iii-laser-rifle-1479123241_d-13.png "Page 14
14
7.4 Power cable
Another way of supplying power to the
LaserPower target is by using an external
pluggable power unit [21]. The power unit
can be used even when a battery is inserted.
The technical specifications of the
power unit must satisfy the following
requirements:
• Nominal voltage: 5 V; 1.0 A
• Voltage type: DC (observe following character: )
• Current capacity: 1,0 A
• Plug connection: Coaxial power connector with
(where possible injection moulded) plug
CAUTION...")
![Page 16
16
8.1 Rear sight adjustment
The ANSCHÜTZ LaserPower III rear sight can be adjusted both vertically and
horizontally.
Adjustment:
The target dot always depends on the setting of the rear sight [2].
Moving the rear sight [2] to the right causes the shot to be displaced to the right.
Moving the sight upwards causes the shot to be displaced upwards.
[2]
Fig. 19 Rear sight Fig.
21 Rear sight adjustment
Fig. 22 Rear sight adjustment
Fig. 20 Removing the aperture screw
Unscrew the aperture screw [x] to...](http://img.usermanuals.tech/thumb/433/6668/w64_laserpower-iii-laser-rifle-1479123241_d-15.png "Page 16
16
8.1 Rear sight adjustment
The ANSCHÜTZ LaserPower III rear sight can be adjusted both vertically and
horizontally.
Adjustment:
The target dot always depends on the setting of the rear sight [2].
Moving the rear sight [2] to the right causes the shot to be displaced to the right.
Moving the sight upwards causes the shot to be displaced upwards.
[2]
Fig. 19 Rear sight Fig.
21 Rear sight adjustment
Fig. 22 Rear sight adjustment
Fig. 20 Removing the aperture screw
Unscrew the aperture screw [x] to...")
![Page 17
17
8.2 Target reducer
The target reducer [24] and the biathlon target [11] are equipped with
Velcro stickers.
In order to fix the target reducer on the biathlon target, push the target
reducer onto the biathlon target with light pressure (the Velcro strips of
both components must lie one on top of each other).
The target reducer can be quickly attached and removed as required.
8.3 Laser alignment
The laser is factory set to a range of 10 metres. Where other distances are being
used, we...](http://img.usermanuals.tech/thumb/433/6668/w64_laserpower-iii-laser-rifle-1479123241_d-16.png "Page 17
17
8.2 Target reducer
The target reducer [24] and the biathlon target [11] are equipped with
Velcro stickers.
In order to fix the target reducer on the biathlon target, push the target
reducer onto the biathlon target with light pressure (the Velcro strips of
both components must lie one on top of each other).
The target reducer can be quickly attached and removed as required.
8.3 Laser alignment
The laser is factory set to a range of 10 metres. Where other distances are being
used, we...")
![Page 20
20
www.laserpower.net e.) The battery gets hot:
– Remove the battery.
– Remove the power supply.
– Check for correct supply voltage.
– Send in if the fault repeats.
f.) Smoke generation at the target box:
– Remove the power supply as quickly as possible.
– Send the target box to us immediately.
13 Description of stickers
[1] Front view of the LaserPower target with view of the target areas and the infrared receiver
(see Page 4).
[2] Rear view of the LaserPower target with view of the...](http://img.usermanuals.tech/thumb/433/6668/w64_laserpower-iii-laser-rifle-1479123241_d-19.png "Page 20
20
www.laserpower.net e.) The battery gets hot:
– Remove the battery.
– Remove the power supply.
– Check for correct supply voltage.
– Send in if the fault repeats.
f.) Smoke generation at the target box:
– Remove the power supply as quickly as possible.
– Send the target box to us immediately.
13 Description of stickers
[1] Front view of the LaserPower target with view of the target areas and the infrared receiver
(see Page 4).
[2] Rear view of the LaserPower target with view of the...")
21 www.laserpower.net > 1. Material: This product has been released for sale after the product itself, its materials and individual components have been subjected to strict inspection, or the rifl e has demonstrated its durability and function during test shooting. J.G. ANSCHÜTZ GmbH & Co. KG offers a full guarantee covering material and manufacturing faults (excluding broken stocks and springs) for a period of two years, provided that the fault can be shown to have been present at the time of handover of the product. No warranty claims will be accepted by J.G. ANSCHÜTZ GmbH & Co. KG for faults that are the result of improper use or unauthorised repairs. The item will either be repaired or replaced at our discretion. Claims for compensation - put forward for any legal reason whatsoever – are excluded. 2. Shooting Performance: The purchaser undertakes to inform J.G. ANSCHÜTZ GmbH & Co. KG in writing of any faults detected in shooting performance within one month of purchase with the submission of their own shooting record. J.G. ANSCHÜTZ GmbH & Co. KG reserves the right to transfer the rifl e to an independent agency for inspection (DEVA or a national ballistics offi ce). Should such an agency confi rm excellent shooting performance, J.G. ANSCHÜTZ GmbH & Co. KG is entitled to charge the purchaser the costs of the rifl e inspection. The accepted warranties do not apply to rifl e damage resulting from mechanical effects and improper use or care by the purchaser. The warranty is excluded if the rifl e has been repaired or modifi ed by unauthorised persons. Likewise, the warranty is cancelled when using reloaded ammunition or ammunition which is not CIP approved. In the event of a warranty/damage claim please enclose this card, completed and signed by your dealer, with the product. J.G. ANSCHÜTZ GmbH & Co. KG · Jagd- und Sportwaffenfabrik Daimlerstrasse 12 · D-89079 Ulm/Germany · www.anschuetz-sport.com SERIAL-NO.: DATE: THIS ITEM WAS PURCHASED FROM: (Stamp or sales reciept.) 16 Guarantee and guarantee card In case of a damaged ANSCHÜTZ seal, your warranty will cease to exist. 14 Disposal Disposal of the LaserPower III Set must be carried out in a sorted manner. 15 Miscellaneous Additional information is available on the Internet at www.anschuetz-sport.com. The free ANSCHÜTZ Newsletter also provides information about innovations concerning this and other products and is available as a subscription on the internet. We would be delighted to hear your suggestions and thoughts on enhance- ments to this user‘s handbook. We look forward to hearing your suggestions on how we can improve it.