Anetsberger Brothers I12 Cooking Computer Ops Manual
Have a look at the manual Anetsberger Brothers I12 Cooking Computer Ops Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 50 Anetsberger Brothers manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 3
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 3 of 12 L20-381 Rev 0
1 Key Locations and Functions:
1.1 To turn the appliance ON:
If power is applied to the appliance, the displays will show . Press the key.
Displays will show one of the following:
; , or . Some messages may show in both left
and right displays. Wait for the appliance to heat up to the [READY] condition before cooking.
1.2 To turn the appliance OFF:
Press the key. Display will momentarily show the...](http://img.usermanuals.tech/thumb/424/6638/w64_i12-cooking-computer-ops-manual-1479121561_d-2.png "Page 3
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 3 of 12 L20-381 Rev 0
1 Key Locations and Functions:
1.1 To turn the appliance ON:
If power is applied to the appliance, the displays will show . Press the key.
Displays will show one of the following:
; , or . Some messages may show in both left
and right displays. Wait for the appliance to heat up to the [READY] condition before cooking.
1.2 To turn the appliance OFF:
Press the key. Display will momentarily show the...")
![Page 8
ANETS I12 Cooking Computer
ANETS P/N 60149509
L20-381 Rev 0 Page 8 of 12
2.2.4 Hold Pre-Alarm
Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to
expire. To use Hold Pre-Alarm, the time value must be a non-zero value, and, must be set to a
value less than Hold Time. Default value is zero, meaning the Hold Pre-Alarm is inactive.
Display shows [nPA mm:ss] [TIME] where “n” is the key number, PA means Pre-Alarm,
and “mm:ss” is minutes and...](http://img.usermanuals.tech/thumb/424/6638/w64_i12-cooking-computer-ops-manual-1479121561_d-7.png "Page 8
ANETS I12 Cooking Computer
ANETS P/N 60149509
L20-381 Rev 0 Page 8 of 12
2.2.4 Hold Pre-Alarm
Hold Pre-Alarm is a timer setting that is used to warn operators that the Hold Time is about to
expire. To use Hold Pre-Alarm, the time value must be a non-zero value, and, must be set to a
value less than Hold Time. Default value is zero, meaning the Hold Pre-Alarm is inactive.
Display shows [nPA mm:ss] [TIME] where “n” is the key number, PA means Pre-Alarm,
and “mm:ss” is minutes and...")
![Page 9
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 9 of 12 L20-381 Rev 0
1
2
0
3 To Change Options Level 2 ( for the Store Manager):
The display must show from section 2 to change these options. When the
product key [10/0] is pressed, the display will show
. Indicator
lights above product keys will illuminate to represent options that may be changed. Each option
listed below uses the product key [0] to toggle or scroll...](http://img.usermanuals.tech/thumb/424/6638/w64_i12-cooking-computer-ops-manual-1479121561_d-8.png "Page 9
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 9 of 12 L20-381 Rev 0
1
2
0
3 To Change Options Level 2 ( for the Store Manager):
The display must show from section 2 to change these options. When the
product key [10/0] is pressed, the display will show
. Indicator
lights above product keys will illuminate to represent options that may be changed. Each option
listed below uses the product key [0] to toggle or scroll...")
![Page 10
ANETS I12 Cooking Computer
ANETS P/N 60149509
L20-381 Rev 0 Page 10 of 12
3.3 Beeper Volume and Tone:
Volume and Tone of the beeper alarm may be changed in this section. Volume ranges are 1,2 and
3, where 3 is the loudest setting. This model also has a selection for tone.
With display showing
, press the product key [0].
Display will show . Press product key 3, display
shows [VOLUME n] [BEEPER].
Use the product key [0] to scroll through choices (n= 1,2,3, or T). Beeper...](http://img.usermanuals.tech/thumb/424/6638/w64_i12-cooking-computer-ops-manual-1479121561_d-9.png "Page 10
ANETS I12 Cooking Computer
ANETS P/N 60149509
L20-381 Rev 0 Page 10 of 12
3.3 Beeper Volume and Tone:
Volume and Tone of the beeper alarm may be changed in this section. Volume ranges are 1,2 and
3, where 3 is the loudest setting. This model also has a selection for tone.
With display showing
, press the product key [0].
Display will show . Press product key 3, display
shows [VOLUME n] [BEEPER].
Use the product key [0] to scroll through choices (n= 1,2,3, or T). Beeper...")
![Page 11
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 11 of 12 L20-381 Rev 0
6
7
3.6 Recovery Test Value:
This controller maintains a record of heat up times for the appliance. A poorly running appliance will
have increased recovery times stored in this display. There is no selection done here, just the
display of recovery time values.
With display showing
, press the product key [0].
Display will show .
Press product key...](http://img.usermanuals.tech/thumb/424/6638/w64_i12-cooking-computer-ops-manual-1479121561_d-10.png "Page 11
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 11 of 12 L20-381 Rev 0
6
7
3.6 Recovery Test Value:
This controller maintains a record of heat up times for the appliance. A poorly running appliance will
have increased recovery times stored in this display. There is no selection done here, just the
display of recovery time values.
With display showing
, press the product key [0].
Display will show .
Press product key...")
ANETS I12 Cooking Computer
ANETS P/N 60149509
Page 11 of 12 L20-381 Rev 0
6
7
3.6 Recovery Test Value:
This controller maintains a record of heat up times for the appliance. A poorly running appliance will
have increased recovery times stored in this display. There is no selection done here, just the
display of recovery time values.
With display showing
, press the product key [0].
Display will show .
Press product key 6, display will show [RECOVERY] [TEST].
Press the product key [0]. Display will show [FnnnLyyy], where nnn is the factory recovery
value, and yyy is the last warm- up recovery value.
After recording these values, press the key. Display will again return to
3.7 Control or Timer: Single Vat
With display showing , press the product key [0].
Display will show .
Press product key 7, display will show [CONTROL].
Use the product key [0] to scroll through choices (Control, Timer).
Press key to save choice. Display shows .
Note: If timer is selected, heat control outputs are disabled, leaving only the timer functions active.
ANETS I12 Cooking Computer ANETS P/N 60149509 L20-381 Rev 0 Page 12 of 12 In the event of problems with or questions about your order, please contact the ANETS factory at (603) 225-6684 World Wide www.anets.com In the event of problems with or questions about your equipment, please contact the ANETS Authorized Service and Parts representative (ASAP) covering your area, or contact ANETS at the numbers listed to the left. MAILING ADDRESS – P.O. BOX 501, CONCORD, NH 03302-0501 SHIPPING ADDRESS – 10 FERRY ST., CONCORD, NH 03301