Analog Devices Blackfin AV EZExtender Manual Rev 21

Blackfin A-V EZ-Extender Manual xi Preface
 Micron camera module interface
 Connection to Micron camera evaluation modules; 
for example, MT9V022 (this part is no longer available)
 26-pin, right-angle, 0.1 in. spacing, female socket
 Kodak camera module interface
 Connection to Kodak camera evaluation modules; 
for example, KAC-9628 (this part is no longer available)
 28-pin, right- angle, 0.1 in. spacing, female socket
 Flat panel display interface (FPDI)
 Connection to flat panel displays; for...

Intended Audience
xii Blackfin A-V EZ-Extender Manual
Intended Audience
The primary audience for this manual is a programmer who is familiar 
with Analog Devices processors. This manual assumes that the audience 
has a working knowledge of the appropriate processor architecture and 
instruction set. 
Programmers who are unfamiliar with Analog Devices processors can use 
this manual but should supplement it with other texts that describe your 
target architecture. For the locations of these documents, see...

Blackfin A-V EZ-Extender Manual xiii Preface
What’s New in This Manual
This is revision 2.1 of the Blackfin A-V EZ-Extender Manual. The manual 
has been updated to include CCES information. In addition, modifica-
tions and corrections based on errata reports against the previous manual 
revision have been made.
For the latest version of this manual, please refer to the Analog Devices 
Web site.
Technical Support
You can reach Analog Devices processors and DSP technical support in 
the following ways:...

Supported Processors
xiv Blackfin A-V EZ-Extender ManualUSA only, call 1-800-ANALOGD (1-800-262-5643)
 Contact your Analog Devices sales office or authorized distributor. 
Locate one at:
www.analog.com/adi-sales
 Send questions by mail to:
Processors and DSP Technical Support
Analog Devices, Inc.
Three Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Supported Processors
This extender board supports Analog Devices ADSP-BF533, 
ADSP-BF537, and ADSP-BF561 Blackfin embedded processors.
Product...

Blackfin A-V EZ-Extender Manual   xv Preface
link to the previous revisions of the manuals. When locating your manual 
title, note a possible errata check mark next to the title that leads to the 
current correction report against the manual. 
Also note, 
MyAnalog is a free feature of the Analog Devices Web site that 
allows customization of a Web page to display only the latest information 
about products you are interested in. You can choose to receive weekly 
e-mail notifications containing updates to...

Related Documents
  xvi Blackfin A-V EZ-Extender Manual
Related Documents
For additional information about the product, refer to the following 
publications.
Table 1. Related Processor Publications
Title Description
ADSP-BF531/ADSP-BF532/ADSP-BF533 
Blackfin Embedded Processor Data Sheet
ADSP-BF534/ADSP-BF536/ADSP-BF537 
Blackfin Embedded Processor Data Sheet 
ADSP-BF561 Blackfin Embedded Symmetric 
Multiprocessor Data SheetGeneral functional description, pinout, and 
timing of the processor
ADSP-BF533...

Blackfin A-V EZ-Extender Manual 1-1 
1 A-V EZ-EXTENDER 
INTERFACES
This chapter provides a setup procedure for the Blackfin A-V 
EZ-Extender and EZ-KIT Lite (ADSP-BF533, ADSP-BF537, or 
ADSP-BF561). The chapter also describes each evaluation interface the 
extender supports. 
The information is presented in the following order.
“A-V EZ-Extender Setup” on page 1-2
“Analog Audio Interface” on page 1-3
“Analog Video Interface” on page 1-4
“Camera Module Interfaces” on page 1-4
“Flat Panel Display Interface”...

A-V EZ-Extender Setup
1-2 Blackfin A-V EZ-Extender Manual
A-V EZ-Extender Setup
It is very important to set up all components of the system containing the 
Blackfin A-V EZ-Extender, then apply power to the system. 
Power your system after these steps are completed:
1. Read the applicable design interface section in this chapter—the 
text provides an overview of the interface capabilities.
2. Read “System Architecture” on page 2-2 to understand the physical 
connections of the extender board. For more...

Blackfin A-V EZ-Extender Manual 1-3 A-V EZ-Extender Interfaces
Analog Audio Interface
The Blackfin A-V EZ-Extender supports audio applications with the 
on-board AD1836A multichannel 96 kHz audio codec. The AD1836A 
codec is a high-performance single-chip device that provides three stereo 
digital-to-analog converters (outputs) and two stereo analog-to-digital 
converters (inputs), using Analog Devices patented multibit sigma-delta 
architecture. The board includes a serial peripheral interface (SPI)...

Analog Video Interface
1-4 Blackfin A-V EZ-Extender Manual
Analog Video Interface
The Blackfin A-V EZ-Extender supports video input and output applica-
tions with an on-board video encoder and decoder. The ADV7179 video 
encoder provides up to three output channels of analog video, while the 
ADV7183B video decoder provides up to three input channels of analog 
video. Both the encoder and decoder connect to 
PPI0 of the expansion 
interface, while the encoder also can connect to 
PPI1 (if the processor...