Home > Anaheim > Stepper > Anaheim Stepper MBC1010175 Users Guide

Anaheim Stepper MBC1010175 Users Guide

Here you can view all the pages of manual Anaheim Stepper MBC1010175 Users Guide. The Anaheim manuals for Stepper are available online for free. You can easily download all the documents as PDF.

Page 1

#L010182May 2005
MBC10101-75 MBC10101-75MBC10101-75 MBC10101-75
MBC10101-75
Bipolar Microstep Driver Bipolar Microstep DriverBipolar Microstep Driver Bipolar Microstep Driver
Bipolar Microstep Driver
User’s Guide User’s GuideUser’s Guide User’s Guide
User’s Guide
910 East Orangefair Lane, Anaheim, CA 92801
e-mail: [email protected](714) 992-6990  fax: (714) 992-0471
website: www.anaheimautomation.com
ANAHEIM AUTOMATION, INC. ANAHEIM AUTOMATION, INC.ANAHEIM AUTOMATION, INC. ANAHEIM AUTOMATION,...

Page 2

#L010182May 2005
MBC10101-75 Microstep Driver Features MBC10101-75 Microstep Driver FeaturesMBC10101-75 Microstep Driver Features MBC10101-75 Microstep Driver Features
MBC10101-75 Microstep Driver Features
• •• •
•  Enhanced Torque/Speed Output over 12VDC and 24VDC drives
• •• •
•  Output Current 10.0 Amps Peak
• •• •
•  Built in short circuit and mis-wire shut down
• •• •
•  Fixed Step Resolution of 2000 steps per revolution
• •• •
•  No Minimum Inductance
• •• •
•  Optical Isolation of Control Inputs
•...

Page 3

#L010182May 2005
Terminal Block Descriptions Terminal Block DescriptionsTerminal Block Descriptions Terminal Block Descriptions
Terminal Block Descriptions
Power Supply Requirements Power Supply RequirementsPower Supply Requirements Power Supply Requirements
Power Supply Requirements
The MBC10101-75 can only be powered by a DC voltage  with a range of 8 to 55VDC.
Power Draw: Power Draw:Power Draw: Power Draw:
Power Draw:
The power consumption of this driver from the DC power supply is determined by the...

Page 4

#L010182May 2005
Absolute Maximum Ratings Absolute Maximum RatingsAbsolute Maximum Ratings Absolute Maximum Ratings
Absolute Maximum Ratings
Input Voltage: 55VDC
Output Current: 10.0 AMPS PEAK
Max Plate Temperature: 70° C
Storage Temperature: 0° to +50° C
Input Voltage (For isolated inputs):  +5V to +24V at 2.5mA
Electrical Specifications Electrical SpecificationsElectrical Specifications Electrical Specifications
Electrical Specifications
m e t Ime t I
m e t Im e t Ime t In i Mni M
n i Mn i Mni Mp y Tpy...

Page 5

#L010182May 2005
Hook Up Drawings Hook Up DrawingsHook Up Drawings Hook Up Drawings
Hook Up Drawings
Figure 1: Hook up for current sinking inputs
Dimension Drawing Dimension DrawingDimension Drawing Dimension Drawing
Dimension Drawing
Figure 5: MBC10101-75 dimensions Figure 2: Hook up for current sourcing inputs 

Page 6

#L010182May 2005
Motor Selection Motor SelectionMotor Selection Motor Selection
Motor Selection
The MBC10101-75 is a Bipolar Microstep Driver that is compatible with both Bipolar and Unipolar Motor
Configurations, (i.e. 8 and 4 lead motors, and 6 lead center tapped motors).
Step motors with low current ratings and high inductance will perform better at low speeds, providing
higher low-end torque. Motors with high current ratings and low inductance will perform better at higher
speeds, providing more...

Page 7

#L010182May 2005
When configuring the motor in a series configuration series configurationseries configuration series configuration
series configuration (connected from end to end with the
center tap floating) use the specified per Phase (or unipolar) current rating to determine the
current setting potentiometer value.
Determining Output Current Determining Output CurrentDetermining Output Current Determining Output Current
Determining Output Current
The output current for the motor used when...

Page 8

#L010182May 2005
4 Lead Motors 4 Lead Motors4 Lead Motors 4 Lead Motors
4 Lead Motors
Multiply the specified series  series series  series 
series motor current by 1.4 to determine the current adjustment potentiometer
value. Four Lead Motors are usually rated with their appropriate series current, as opposed to the 
Phase
Current
, which is the rating for 6 and 8 lead motors.
8 Lead Motors 8 Lead Motors8 Lead Motors 8 Lead Motors
8 Lead Motors
Series Connection: Series Connection:Series Connection:...

Page 9

#L010182May 2005
Torque Speed Curves Torque Speed CurvesTorque Speed Curves Torque Speed Curves
Torque Speed Curves
ANAHEIM AUTOMATION, INC. 
Start reading Anaheim Stepper MBC1010175 Users Guide

Related Manuals for Anaheim Stepper MBC1010175 Users Guide

All Anaheim manuals