Home > Anaheim > Brushless DC > Anaheim Brushless DC BLY17MDA Series BLDC MotorsDrivers Users Guide

Anaheim Brushless DC BLY17MDA Series BLDC MotorsDrivers Users Guide

Add to Favourites
    Download as PDF

    View the Anaheim Brushless DC BLY17MDA Series BLDC MotorsDrivers Users Guide for free. All the Anaheim manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview View all the pages Comments
    Page 1 September 2012 L0106101 BLY17MDA Series 24V, 10A Brushless Controller/Motor User’s Guide 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: info@anaheimautomation.com(714) 992-6990 fax: (714) 992-0471 website: www.anaheimautomation.com ANAHEIM AUTOMATION
    Page 2 September 2012 L0106102 BLY17MDA Driver Features • Constant Velocity Mode Within 5% • 400 - 4000 RPM Speed Range • 0.5V to 5V External Voltage Speed Control • 2-Quadrant Operation • Short Circuit Protection • Maximum Current Limit Setting at 10.0 Amps Peak • Open Drain Speed Out • Run/Stop and Direction Inputs • TTL-CMOS Compatible Inputs • Compact Size • Screw Type Terminal Block General Description The BLY17MDA is a compact construction that implements a DC Brushless controller and a DC...
    Page 3 September 2012 L0106103 Specifi cations Direction Input: (TB1, Pin 1) TTL-CMOS Compatible Logic “0” = 0 - 0.8VDC Logic “1” = OPEN The Direction Input is pulled up through a 10k ohm resistor. Run/Stop Input: (TB1, Pin 2) TTL-CMOS Compatible Logic “0” = 0 - 0.8VDC, Motor Stopped Logic “1” = OPEN The Run/Stop Input is pulled up through a 10k ohm resistor. V Speed: (TB1, Pin 3) To control the speed of the motor with an external DC voltage, a voltage from 0.5VDC (min) - 5VDC (max) must be applied with...
    Page 4 September 2012 L0106104 Speed Adjust Setting An external voltage is used to control the speed of the motor. The 0.5 - 5VDC analog voltage can be tied on VSPD (TB1 - Pin 3) with respect to AGND (TB1 - Pin 5). A ramp up profi le at start up on VSPD (TB1 - Pin 3) would alleviate excessive current draw from the power supply. When the motor is rapidly accelerated from standstill, current drawn from the power supply can measure up to ten times the rated motor current. This startup current spike can...
    Start reading Anaheim Brushless DC BLY17MDA Series BLDC MotorsDrivers Users Guide

    Related Manuals for Anaheim Brushless DC BLY17MDA Series BLDC MotorsDrivers Users Guide

    All Anaheim manuals