Home > AMT Datasouth > Printer > AMT Datasouth Printer Fastmark 400 Users Guide

AMT Datasouth Printer Fastmark 400 Users Guide

Here you can view all the pages of manual AMT Datasouth Printer Fastmark 400 Users Guide. The AMT Datasouth manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 1

Fastmark 400 Series
Barcode Label Printer
User’s Guide
Part No. 110021    A 

Page 2

Users Guide 1
IMPORTANT SAFETY INSTRUCTIONS
AND OTHER NOTICES
„ This label printer complies with the requirements in Part 15 of FCC rules for a Class B or A
computing device.  Operation of this equipment in a residential area may cause unacceptable
interface to radio and TV reception, requiring the operator to take whatever steps are necessary to
correct the interference.
 
„ Place the printer on a flat, firm and solid surface.
„ Do not place the printer near a heat source or near water.
 
„ Refer to the...

Page 3

Users Guide 2
CONVENTIONS
Some of the procedures in this guide contain special notices that highlight important information:
NoteIndicate information that you should know to help your printer
run properly and efficiently.
CautionIndicate guidelines that, if not followed, can cause damage to
equipment.
WarningIndicate a situation where there may be a danger to you.
The use of the terms right and left assume that you are looking at the front of
the printer.
TECHNICAL SUPPORT
Please contact your local...

Page 4

Users Guide 3
Table of Contents
PRODUCT DESCRIPTION ...................................................................................... 6
Unpacking and Inspection.......................................................................................... 8
INSTALLATION AND CONFIGURATION .......................................................... 9
Finding a Location for the Printer ............................................................................ 9
Connecting the Power Cord...

Page 5

Users Guide 4
Internal Fonts ......................................................................................................... 56
Courier Font Set ..................................................................................................... 61
Internal Bar Codes ................................................................................................. 65
Appendix E:  FONTS AND BAR CODES FOR PPLB Emulation ...................... 69
Internal Fonts...

Page 6

Users Guide 5
Table of Figures
Figure 1 - Fastmark 400 series................................................................................................................. 7
Figure 2 - Included Materials .................................................................................................................. 8
Figure 3 - Switches, Indicators and Connections .................................................................................... 9
Figure 4 - Power Connection...

Page 7

Users Guide 6
(this page intentionally left blank) 

Page 8

Users Guide 7
PRODUCT DESCRIPTION
This label printer is a high-performance, low-cost direct thermal/thermal transfer labeling system.  Its
user-friendly design and affordable price set a new standard for the Desktop Label Printer in retail,
office, industrial, and many other applications.
The printer is designed with the most efficient memory management technology - True Speed and
prints at a speed of 2 to 3 inches per second.  When bundled with its smart printer driver, the user can
easily print out bar...

Page 9

Users Guide 8
UNPACKING and INSPECTION
This printer is packed in a heavyweight carton and custom recyclable foam for environmental
protection.  Inspect the shipping carton and contact the carrier directly to report any suspected damage.
Consider the following when unpacking:
♦ The container should stay right side up.
♦ Lift the printer out of the box carefully.
♦ Remove the accessory items.
♦ Set the printer on a solid, flat surface.
♦ Inspect the shipping container and printer for any damage that may...

Page 10

Users Guide 9
INSTALLATION AND CONFIGURATION
Figure 3 - Switches, Indicators and Connections
Finding a Location for the Printer
Before setting up the printer you should first consider the following:
♦ Find a solid flat surface with adequate room for the printer.  Make sure there is enough room
on the top side for the media and ribbon access.
 
♦ The location should be near the host or terminal.  Consider the distance between host and
printer for the communication cable (serial or parallel cable)
 
♦ The...
Start reading AMT Datasouth Printer Fastmark 400 Users Guide

Related Manuals for AMT Datasouth Printer Fastmark 400 Users Guide

All AMT Datasouth manuals