AMT Datasouth Printer Accel 7350 User guide
Have a look at the manual AMT Datasouth Printer Accel 7350 User guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 11 AMT Datasouth manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 1 8. Specify the page length. Menu Item 6 PAGE LGTH FRONTTR Check the fanfold paper size marked on the package. 9.Perform trial printing after connecti ng the printer to the computer. Adjust the tractors left or right to align the left print margin. Adjust Menu Item “2 TOF ADJUST” to correct vertical alignment. 2 TOF ADJUST FRONTTR When using the front tractor along with the CSF, cut the fanfold paper by hand, not by the paper cutter. Page 20 of 46
Chapter 1 • Setting up the CUT SHEET FEEDER (optional) 1. Attach the paper rack holder (right & left) and the paper rack. 2. Move both paper guides to the right & left end. 3. Attach the hoppers and center support to the cut sheet feeder. Page 21 of 46
Chapter 1 4. Attach the cut sheet feeder to the back of the printer. 5. Shuffle the paper as show below. Use both hands and hold firmly at each end when lifting the cut sheet feeder. Personal injury can occur if the CSF unit is dropped. CAUTION NOTE: Be sure to shuffle sheets sufficiently before l sheets time re setting them. Otherwise, severa of paper may be fed at the same sulting in a paper jam. Page 22 of 46
Chapter 1 6. Set the CSF release levers to the front to release the paper bin. 7. Set the paper guide lock lever to the “Release” position to adjust the paper width. Set the paper guide lock lever to the Locked position. Page 23 of 46
Chapter 1 8. Set the CSF release levers to the back to close the paper bin. 9. Slide the paper path lever to the symbol or the position of AUTO. ASF The lever position should be at AUTO when using the printer driver. Page 24 of 46
Chapter 1 10. Perform trial printing after connecting the printer to the computer. In case of vertical offset, the printing position should be adjusted by Menu Item “5 TOF ADJUST”. 5 TOF ADJUST CSF Page 25 of 46
Chapter 1 • Installing the printer driver Windows 2000 Installation: 1. Select the desired driver provided on the CD shipped with your printer. 2. Open the driver folder and execute “SETUP.exe”. 3. Choose the Printer in the Driver Installation Utility window and Click the Install button. Driver Installation Utility -7350 -7350 4. If a Hardware Installation window pops up, select Continue Anyway. 5. Wait for the “Installation Successf ul” message and press the EXIT button. Win98 or WinME Installation: 1. From the task bar select Start+Setti ngs+Printers the printers folder should be displayed. 2. Double click the Add Printer icon. Wizard dialog should be displayed. Click the Next button. 3. Select the Local printer opt ion and click the Next button. 4. Select the desired printer port and click the Next button. 5. From the Manufacturers list di alog click the Have Disk button. 6. From the Install From Disk dialog browse to the location of the driver files and click OK. 7. From the Install from Disk dialog, the 7350.inf f ile should be displayed. Select this file and click OK. 8. Click OK from the Install From Disk dialog. 9. The Add Printer Wizard should now display the available models for this driver. Select the model you wish to install and click Next. 10. Select Replace existing driver and click Next. 11. From the Name your printer dialog , enter the name you wish to call the printer. This name will be displayed in the Printers Dialog. Also, if you want this printer to be the default system printer, click this check box now. click the Next button Page 26 of 46
Chapter 2 • Control Panel The liquid crystal display (LCD) on the control panel displays the processing conditions of the printer and the setting of the functions. The keys on the control panel provide various functions. 1. Control Panel view Page 27 of 46
Chapter 2 2. Function keys 1. ONLINE Press the ONLINE key to change the printing enabled (online) state and printing disabl ed (offline) state. 2. RESET (ALT + RESET keys) Press the RESET key while you press the ALT key, a buzzer will sound. Then “INITIALIZE” is displayed on the LCD if the keys are released. The printer is reset immediately. 3. SPEED Press the SPEED key to display the currently selected printing quality on the LCD. Each press of the key to display the printing qualities in the following order. LQ NORMAL HIGH 2 DRAFT 4. HIGH IMPACT Press the key to change the print mode. Can open and close multipart print mode. 5. MENU (ALT + MENU keys) Press the ALT + MENU key to enter the MENU MODE. See the Chapter 3 Setup options for details. Page 28 of 46
Chapter 2 Page 29 of 46 6. ENTER The setting are saved by pressing the ENTER key. 7. ALT The following functions are executed by pressing the corresponding key while you press the ALT key. FF→ Form Feed MICRO LF → Micro Line Feed MICRO RLF → Micro Reverse Line Feed MENU → Setup Menu RESET → Resets the printer 8. TEAR OFF Press the TEAR OFF key, and the printer automatically feeds the perforation of t he paper to the paper cutter position (for fanfold paper only) . If the perforation is not adjusted to the cutter position, correct the position with the MICRO LF or MICRO RLF key. The correct position is saved in memory, and the perfora tion is fed automatically to the paper cutter position at next time.