AMT Datasouth Printer Accel 7350 User guide

							
Chapter 1 
• Setting up the front Paper Rack & Rear Tractor Assembly  
• The tractor can be installed in front or rear side;  
1. Attach the paper rack holders (right & left)  
Press the holders until you hear a click.  
 
 
 
 
 
 
 
 
 
  When removing the paper rack holder, use the 
 remove lever, located above the holder .  
2. Attach the paper rack to the paper rack holders . 
 
 
 
 
 
 
 
 
 
 
3. Lower the paper rack. 
Snap the paper rack securely onto the holders. 
   
 
 
 
 
 
 
 
 
 
 
 
Page 10 of 46  
						

							
Chapter 1 
4. Move both paper guides to the right & left end. 
 
 
 
 
 
 
 
 
 
 
 
 
5. Insert the connector on the tractor assembly to the mating connector 
on the rear side of t he printer. Then install the rear tractor. 
 
 
 
 
 
 
 
 
 
 
 
 
 
6. Both tractors can be moved right  and left to meet the width of paper 
or printing data when the lock lever is released. 
 
 
CAUTION 
Do not put your finger 
under the tractor cover  
 
 
 
 
• Set fanfold paper onto the tractors. 
Page 11 of 46  
						

							
Chapter 1 
7. Slide the paper path lever to the symbol or the position of AUTO.  
 
The lever position should be at AUTO when using 
the printer driver. 
 
 
 
 
 
 
 
 
8. Specify the page length. 
 
 
  
7 PAGE LGTH REARTR
 
 
 
 
Fanfold paper size marked on package (Example) 
 
 
 
 
 
 
 
When the page length is not specified, refer to the number 
of sprocket holes to determine the page length. 
 
 
 
 
 
 
 
 
 
No. of holes x 0.5 inch equals the page length. The above example (8 holes) relates to 4-inch fanfold length. 
 
 
Page 12 of 46  
						

							
Chapter 1 
9. Perform a trial print sample after connecting the printer to the computer. 
 
Adjust the tractors left or right  to align the left print margin. 
Adjust Menu Item “3 TOF AD JUST” to correct vertical 
alignment. 
 
 3 TOF ADJUST 
REAR TR 
 
 
 
 
 
 
 
 
Page 13 of 46  
						

							
Chapter 1 
• Setting up the Manual cut sheet  
1. Attach the paper rack holders (right & left) and the paper rack. Refer 
 to Chapter 1, “Installing Paper Rack & Rear Tractor Assembly”.  
 
 
2. Adjust the printing position by  sliding the paper guide right or left. 
 
 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
When loading a wide paper, adjust the 
right paper guide.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page 14 of 46  
						

							
Chapter 1 
3. Slide the paper path lever to the appropriate symbol, or the AUTO 
position. 
 
The lever position should be at AUTO 
when using the printer driver. 
 
 
 
AutoSheetFeed 
 
 RearTractor
 
 PaperRack/Manual
 
 FrontTractor
 
 
 
 
 
 
 
 
4. Connect the printer to the com puter and perform a trial printing. 
 
 
The display appears as below along with the sound of a 
buzzer when the printer receives the data from the 
computer. 
 
LOAD PAPER  
 
 
 
 
 
 
 
Page 15 of 46  
						

							
Chapter 1 
5. Insert a cut sheet paper straight along the paper guide. 
 
If paper is inserted slightly skewed, the printer detects it, 
and adjusts the paper  automatically.  
 
 NOTE:    If 
skepaper is extremely
wed (i.e. paper is ove
r 
 the 
not 
casguide), the printer may
adjust the skew. In this
e, move the pape
r
 
 
 guid
thene to the left a little,  insert the paper a
t 
 som
pape distance from the
er guide.  
 
 
 
 
 
 
 
In case of vertical offset the printing position should be 
adjusted by Menu Item “4 TOF ADJUST”.  
 
 4 TOF ADJUST 
MANUAL  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page 16 of 46  
						

							
Chapter 1 
• Setting up the Front tractor  
1. Attach the paper rack holders (right & left) to the printer as shown 
below. 
 
Place the bottom of the holder in to the chassis, rotate the 
holder up until you hear a click. 
 
   
 
 
 
 
 
 
 
 
 
 
 
2. Insert the tractor connector (left side) to the ma ting connector on the 
front side of the printer. 
 
3. Attach the tractor to the paper rack holders as shown below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Page 17 of 46  
						

							
Chapter 1 
4. Vertically attach the paper rack to the holders as shown below. 
 
   
 
 
 
 
 
 
 
 
 
 
 
 
5. Both tractors can be moved right  and left to meet the width of paper 
or printing data when the lock lever is released. 
 
 
 
  
 
 
 
CAUTION 
Do not put your finger 
under the tractor cover.  
 
 
 
 
 
 
 
 
Set fanfold paper onto the tractors 
 
 
 
 
Page 18 of 46  
						

							
Chapter 1 
6. Lower the paper rack down and then press the paper rack securely 
onto the paper rack holders. 
 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
7. Slide the paper path lever to the appr opriate symbol, or the  AUTO 
position.  
 
The lever position should be at AUTO 
when using the printer driver. 
 
  
Auto Sheet Feed/CSF 
 
RearTractor 
 PaperRack/Manual 
 FrontTractor
 
 
 
 
 
 
 
 
 
 
 
 
Page 19 of 46