AMT Datasouth Printer Accel 7350 User guide

Chapter 5 
9. Unexpected printing results . 
A gap occurs between the print star t position and the top end of paper. 

Chapter 5 
2. Operational error message  
 
 
• The print head is being cooled to 
prevent it from overheating. The 
ONLINE lamp blinks. 
 
The print head has become too hot 
during high-density printing. When this 
message is displayed, the printing speed 
is reduced or printing stops. When the 
print head temperature drops, the printer 
restarts printing. 
 
 
 
• This error message indicates that 
fanfold paper is not fed back into the 
tractor assembly properly. 
 
Cut the paper to remove it....

Chapter 5 
 
 
A paper jam occurs at the front tractor. 
Pull the ejected paper outward gently 
and press the  
ONLINE key to restart printing. 
When the PAPER JAM still remains, 
remove all paper and reinstall the paper 
into the tractor properly and press the 
ONLINE key. 
Re-adjust the gap between the print 
head and the paper, by menu #1 HEAD 
ADJUSTMENT. When the paper 
thickness may be not constant, set YES 
at menu #45 LF STABLE. When the 
PAPER JAM appears despite no actual 
paper jamming, set...

Chapter 5 
Page 43 of 46 
 
 
 • This error occurs if the printer detects 
that a cut sheet paper is manually loaded 
with excessiveskew. 
• The ERROR lamp blinks, and the buzzer 
sounds three times.  The paper is ejected 
and the printer enters the offline state. 
 
Load paper again. If it is loaded straight, 
the printer enters the online state. 
 
 
 
• This error occurs if the front cover is 
opened. The ONLINE lamp blinks. 
 
Closing the front cover will remove the 
cause of this error. The printer...

Chapter 6 
Page 44 of 46 
 
 
• Printer specifications   
Printing Method  Serial impact dot matrix  
Print Head  24pin  
Maximum column  136 columns (10cpi)  
Print speed  LQ  150 CPS (10cpi) 
 NORMAL (NLQ)  200 CPS (10cpi) 
 DRAFT (HQDR)  300 CPS (10cpi) 
 High 2 (HS Draft)  400 CPS (10cpi) 
 SSD  600 CPS (15cpi) 
Multipart printing  Standard  1+5p 
 
 
DARK  1+7p 
Line feed speed  36 LPI  
Line feed pitch  1/360 INCH  
Paper path  Front tractor or rear tractor  
 Manual or notebook 
 CSF (option)...

Chapter 6 
• Other specifications   
Power supply  AC 120 V, 60Hz (USA and Canada)  
 AC 220-240V, 50-60Hz (Europe and Asia)  
Power consumption  Draft self 170watt
s 2.3A (120VAC) 1.3A(220-240VAC) 
 Stand-by 40watts 0.6A (120VAC) 0.4A(220-240VAC) 
 Energy Star 15watts  
5 to 40o(41 to 104o)  Operating temperature  
Operating humidity  20 to 80% (No condensation)  
Dimensions  25”(W) x 18.3”(D) x 11.6”(H)  
Weight  50 lbs  
 • Paper specifications  
Available paper size   
• Fanfold paper  Paper width...

 
 
AMT Datasouth Corporation 
803 Camarillo Springs Road, Suite #D 
Camarillo CA,  93012 1-800-215-9192 
Page 46 of 46