AMT Datasouth Printer Accel 7350 User guide
Here you can view all the pages of manual AMT Datasouth Printer Accel 7350 User guide. The AMT Datasouth manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
Chapter 1 8. Specify the page length. Menu Item 6 PAGE LGTH FRONTTR Check the fanfold paper size marked on the package. 9.Perform trial printing after connecti ng the printer to the computer. Adjust the tractors left or right to align the left print margin. Adjust Menu Item “2 TOF ADJUST” to correct vertical alignment. 2 TOF ADJUST FRONTTR When using the front tractor along with the CSF, cut the fanfold paper by hand, not by the paper cutter....
Page 22
Chapter 1 • Setting up the CUT SHEET FEEDER (optional) 1. Attach the paper rack holder (right & left) and the paper rack. 2. Move both paper guides to the right & left end. 3. Attach the hoppers and center support to the cut sheet feeder. Page 21 of 46
Page 23
Chapter 1 4. Attach the cut sheet feeder to the back of the printer. 5. Shuffle the paper as show below. Use both hands and hold firmly at each end when lifting the cut sheet feeder. Personal injury can occur if the CSF unit is dropped. CAUTION NOTE: Be sure to shuffle sheets sufficiently before l sheets time re setting them. Otherwise, severa of paper may be fed at the same sulting in a paper jam. Page...
Page 24
Chapter 1 6. Set the CSF release levers to the front to release the paper bin. 7. Set the paper guide lock lever to the “Release” position to adjust the paper width. Set the paper guide lock lever to the Locked position. Page 23 of 46
Page 25
Chapter 1 8. Set the CSF release levers to the back to close the paper bin. 9. Slide the paper path lever to the symbol or the position of AUTO. ASF The lever position should be at AUTO when using the printer driver. Page 24 of 46
Page 26
Chapter 1 10. Perform trial printing after connecting the printer to the computer. In case of vertical offset, the printing position should be adjusted by Menu Item “5 TOF ADJUST”. 5 TOF ADJUST CSF Page 25 of 46
Page 27
Chapter 1 • Installing the printer driver Windows 2000 Installation: 1. Select the desired driver provided on the CD shipped with your printer. 2. Open the driver folder and execute “SETUP.exe”. 3. Choose the Printer in the Driver Installation Utility window and Click the Install button. Driver Installation Utility -7350 -7350 4. If a Hardware Installation window pops up, select Continue Anyway. 5. Wait for the “Installation Successf ul” message and press...
Page 28
Chapter 2 • Control Panel The liquid crystal display (LCD) on the control panel displays the processing conditions of the printer and the setting of the functions. The keys on the control panel provide various functions. 1. Control Panel view Page 27 of 46
Page 29
Chapter 2 2. Function keys 1. ONLINE Press the ONLINE key to change the printing enabled (online) state and printing disabl ed (offline) state. 2. RESET (ALT + RESET keys) Press the RESET key while you press the ALT key, a buzzer will sound. Then “INITIALIZE” is displayed on the LCD if the keys are released. The printer is reset immediately. 3. SPEED Press the SPEED key to display the currently selected printing quality on the LCD. Each press of the key to display the...
Page 30
Chapter 2 Page 29 of 46 6. ENTER The setting are saved by pressing the ENTER key. 7. ALT The following functions are executed by pressing the corresponding key while you press the ALT key. FF→ Form Feed MICRO LF → Micro Line Feed MICRO RLF → Micro Reverse Line Feed MENU → Setup Menu RESET → Resets the printer 8. TEAR OFF Press the TEAR OFF key, and the printer automatically feeds the perforation of t he paper to the paper cutter position...