Amptron iFinity Audio Transmitter TX1 user manual
Here you can view all the pages of manual Amptron iFinity Audio Transmitter TX1 user manual. The Amptron manuals for Transmitter are available online for free. You can easily download all the documents as PDF.
Page 1
R User and Installation Guide Digital Wireless Audio TransmitteriFiniy t TM
Page 2
Contents: Unpacking ....................................................................................... Connecting the transmitter .............................................................. Pairing the transmitter and wireless devices .................................. Setting the transmitter level control ................................................. Troubleshooting .............................................................................. Technical specifications...
Page 3
User and Installation GuideR Connecting the transmitter With the transmitter, you can send music from your iPod / iPhone or from any audio source that either provides a line-level audio signal or amplified speaker level signal. Depending on what type of audio signal you wish to transmit, follow one of the below guidelines: Place your iPod or iPhone into the iPod cradle located at the top of the transmitter. Ensure the iPod / iPhone display faces towards the front of the transmitter. The transmitter...
Page 4
User and Installation GuideR DC 7.5V Power outlet AC adapter Example:Transmitting music from an iPod iPod Page 2 LR Line In7.5V Speaker Level Input
Page 5
User and Installation GuideR Page 3 Using the transmitter line audio input: Audio Source LINE OUT DC 7.5V Power outlet AC adapter Example:Connecting to a line-level audio source (3.5 mm headphone jack) LRLine In7. 5 V Speaker Level Input
Page 6
User and Installation GuideR Page 4 LRLine In7.5V Speaker Level Input Audio Source Power outlet AC adapter Example:Connecting the transmitter to an amplified audio source LRSPEAKER OUT DC 7.5V
Page 7
User and Installation GuideR Page 5 Audio Source LR LINE OUT DC 7.5V Power outlet AC adapter Example:Connecting the transmitter to a line-level audio source (RCA jacks) using a Y adapter cable Y adapter cable LRLine In7.5V Speaker Level Input
Page 8
User and Installation GuideR Page 6 Pairing the transmitter and wireless devices In order for the transmitter to transmit to wireless devices (audio receivers, wireless speakers etc.), they need to be paired. To pair the transmitter and a wireless device, push the transmitter pairing button. The network status light will start flashing quickly. Then push the pairing button of the wireless device within 5 minutes. You can transmit to up to 4 wireless devices from one transmitter. Pair each wireless...
Page 9
User and Installation GuideR Page 7 Setting the transmitter level control The transmitter perfroms advanced analog-to-digital conversion of the audio signal. In order to achieve maximum dynamic range and avoid clipping of the audio, the transmitter level control must be adjusted to your audio source. In order to properly set the transmitter level control, turn the volume control of the wireless device to a fairly low setting. Then feed a signal with the highest possible volume into the transmitter....
Page 10
User and Installation GuideR Page 8 Troubleshooting Problem Network status light is OFF Network status light is FLASHING Network status light is ONPossible Cause AC adapter not plugged in properly Wireless device not paired with transmitter Strong interference Wireless device too close to transmitter Transmitter level control set too low Wireless device volume control too low No audio at transmitterSolution Check AC adapter for proper fit and mains outlet for power Pair the wireless device with the...