Ampro Corporation Ampro Projector 5200 User Manual

Ceiling Mount Information
39
5200 User’s Manual
Ceiling Mount (69728) Dimensions
Top Slide Bracket
Ceiling Mount Housing
HB-Hanging Bracket 

40
5200 User’s Manual
RS-232C Interface Data
An external PC or third party controller may be used to control your ALICE 5200. This section will
describe how to connect and control the 5200 DLP projector using external serial communication with
characters and numeric commands.
Enabling Com
PortsAs standard, Serial Port 1 (COM1) is unused and may be used for the external control of the
projector. Perform the following to enable external control and select which Serial Port to
use;

  Open the Main menu

...

RS-232C Interface Data
41
5200 User’s Manual
Character /
Numeric
CommandsCommands to the projector are two general types. Character commands and Numeric
commands. Character commands in fact consist of two types. Some of them put the
projector into a particular adjustment mode. For example, sending a letter B puts the
projector into brightness adjustment mode. Once in that mode, adjustments may be done it
two ways. The character + (plus) and – (minus) respectiv ely increase and decrease the
parameter....

RS-232C Interface Data
42
5200 User’s Manual
CODEDESCRIPTIONNOTE
101# Bit Sequenc e: Us e 101#n, where n = 0 - 61 1
110# Border Red: Us e 110#n, where n = 0 - 255
111# Border Green: Us e 111#n, where n = 0 - 255
112# Border Blue: Us e 112#n, where n = 0 -255
113# Black Level Red: Us e 113#n , where n = 1 - 254
114# Black Level Green: Us e 114#n, where n = 1 - 254
115# Black Level Blue: Us e 115#n, where n = 1 - 254
116# Gain Red: Us e 116#, where n = 0 - 63
117# Gain Green: Us e 117#n, where n = 0 - 63...

43
5200 User’s Manual
Connector Pin Assignments
Keyboard Port Pin AssignmentsKeyboard Port Pin NumbersPinSignal
1 Keyboard Data KBDATA
2 No Connection N/C
3 Signal Ground GND
4 Fused Supply Voltage FVcc
5 Keyboard Clock KBCLK
6 No Connection N/C
Keyboard Port
Your projector comes
standard with a wireless
keyboard. The cables
and adapters for
connecting the keyboard
IR receiv er are provided.
Shell Chassis Ground N/A
Mouse Port Pin AssignmentsMouse Port Pin NumbersPinSignal
1 Mouse Data MFDATA
2 No...

Connector Pin Assignments
44
5200 User’s Manual
LPT2 Pin AssignmentsLPT2 Pin NumbersPINSIGNAL
1 Strobe STB#
2 Printer Data Bit 0 PD0
3 Printer Data Bit 1 PD1
4 Printer Data Bit 2 PD2
5 Printer Data Bit 3 PD3
6 Printer Data Bit 4 PD4
7 Printer Data Bit 5 PD5
8 Printer Data Bit 6 PD6
9 Printer Data Bit 7 PD7
10 Acknowledge ACK#
11 Busy BUSY
12 Paper End PE
13 Select SLCT
14 Automatic Feed AFD#
15 Error ERR#
16 Initialize Printer INIT#
17 Select In SLIN#
Parallel Port (LPT2)
If you reconfigure your...

Connector Pin Assignments
45
5200 User’s Manual
Internal Video Card “OUT” Pin AssignmentsInternal Video Card “OUT”
Pin NumbersPinSignal
1 Red Video RED
2 Green Video GREEN
3 Blue Video BLUE
4 Ground GND
5 DDC Return DCD RET
6 Ground Red GND RED
7 Ground Green GND GRN
8 Ground Blue GND BLU
9 Reserv ed RESV
10 Ground Sync GND SYNC
11 Ground GND
12 DDC Data DDC DATA
13 Horizontal Synchronization HSYNC
14 Vertical Synchronization VSYNC
Internal Video
Card OUT
(HD15 pin)
This port may
be used to
display the...

46
5200 User’s Manual
Specifications and Options
5200 Specifications
Brightness
2000 (ANSI Lumens)
DMD Chip Resolution
1024 x 768
Contrast
250:1 ANSI
Horizontal Scan Rate
15-64 kHz
Vertical Scan Rate
30-120 Hz
Source Compatibility
1280 x 1024
Computer Features
Pentium Processor 233 MHz with MMX
Hard Drive 4 GB
Memory 64 MB
ISA/PCI Slots 7 Total
Model Features
IR Keyboard / Mouse & Remote Control, Windows, CD-ROM, Modem,
Network Interface, and Audio Card
Physical
Power/Voltage 1200 W / 85-240 VAC...

Specifications and Options
47
5200 User’s Manual
Options
Lenses
Fixed: 1.0:1, 2.3:1, 3.9:1, 5.5:1
Zoom: 1.2-2.3:1, 2.34-5.5:1, 1.5-2.5:1, 2.5-4.0:1
Switcher
8-channel, 250Mhz bandwidth, table or rack mount switcher with separate or
composite sync inputs, audio follow, RGsB, Video or S-Video and 5 (152 cm) RS-
232C cable
Ceiling Mount Kit
Ceiling mount kit with adjustments for roll, pitch and yaw
Remote Controls
Infrared Keyboard / mouse & remote
Manual
Service Manual
Input Options
Faroudja Video/S-Video...

48
5200 User’s Manual
Lamp Module Replacement Procedure
A replacement lamp module may be purchased (P/N 69736) from your selling
dealer an authorized AmPro Service Center or AmPro Corporation.
Replacement
ProceduresThe lamp module is accessed on the rear of the projector. It consists of a 500W Xenon
lamp mounted in a heat sink and housed in a protective plastic assembly.
!
The lamp assembly is very hot during normal operation. To minimize risk of
potential burns to the skin, allow time for the lamp...