American Audio Turntable TT Record User Manual

							
USER INSTRUCTIONS
    TT-Record
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.AmericanAudio.us
Turntable Mp3 Recorder
"Fast, Easy, and Reliable"
 1/08 
						

							
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 2 
						

							
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 3
ELECTRICAL SAFETY PRECAUTIONS.............................................................\
.....................................4
INSTALLATION      gUIdLINES....................................................................................................................5
PRO dUCT      INFORM ATION......................................................................................................................6
CUSTOMER  SUPPORT ........................................................................\
..................................................6
QUICK START........................................................................\
.................................................................7
ASSEMBLY ..... ........................................................................................................................................8
SET-UP...................................................................................................................................................9
hEAdShELL  ANd  CARTRIdgE  ASSEMBLY.........................................................................................9
PROPER  TURNTABLE  INSTALLATION..............................................................................\
..................11
TONEARM BALANCINg.......................................................................................................................11
ANTI-SKATE .........................................................................................................................................11
FUNCTIONS ANd CONTROLS
  MAIN  UNIT...................................................................................................................\
..............12
  TONEARM  ASSEMBLY..............................................................................................................14
TROUBLE ShOOTINg.......................................................................\
...................................................15
WARRANTY ..........................................................................................................................................16
SPECIFICATIONS.................................................................................................................................17
 CONTENTS
CAUTION: TO REDUCE THE RISK OF ELECTRIC 
SHOCK, DO NOT REMOVE THE COVER.  
THERE ARE NO USER SERVICEABLE PARTS 
INSIDE.  REFER ALL SERVICE TO YOUR 
AUTHORIZED AMERICAN AUDIO® DEALER.
CAUTION
Do not open -
risk of electric shock
The  lightning  flash  with  an  arrow  triangular 
symbol  is  intended  to  alert  the  user  to  the 
presence of non insulated “dangerous volt-
age”  within  the  products  enclosure,  and 
may be of sufficient magnitude to constitute 
a risk of electric shock.
The  exclamation  point  triangular  symbol  is 
intended  to  alert  the  user  to  the  presence 
of  important  operating  and  maintenance 
(servicing)  instructions  in  the  user  manual 
accompanying the amplifier.
NOTE: This product satisfies FCC 
regulations  when  shielded  cables 
and  connectors  are  used  to  con-
nect  the  unit  to  other  equipment. 
To  prevent  electromagnetic  inter-
ference  with  electrical  appliances 
such as radios and televisions, use 
shielded  cables  and  connectors 
for connections. 
						

							
WARNING: TO PREVENT FIRE OR ELECTRIC 
SHOCK  HAZARD,  DO  NOT  EXPOSE  THIS 
UNIT TO RAIN, LIQUIDS, OR MOISTURE 
The  serial  and  model  number  for  this  unit  is 
located  on  the  rear  panel.  Please  write  down 
the  numbers  here  and  retain  for  future  refer-
ence. 
Model No._____________________________
Serial No._____________________________
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________
_________________________________________
_________________________________________
Dealer Phone__________________________
CAUTION:  TO  PREVENT  ELECTRIC  SHOCK 
DO NOT USE THIS (POLARIZED) PLUG WITH 
AN  EXTENSION  CORD,  RECEPTACLE,  OR 
OTHER  TYPE  OF  ELECTRICAL  OUTLET 
UNLESS  THE  WIDE  BLADES  CAN  BE 
CAREFULLY  INSERTED  INTO  A  MATCHING 
WIDE SLOT.
ATTENTION: POUR  PREVENIR  LES  CHOCS 
ELECTRIQUES  NE  PAS  UTILISER  CETTE 
FICHE  POLARISEE  AVEC  UN  PROLON-
GATEUR,  UNE  PRISE  DE  COURANT  OU 
UNE  AUTRE  SORTIE  DE  COURANT,  SAUF 
SI  LES  LAMES  PEUVENT  ETRE  INSEREES  A 
FOND SANS EN LAISSER AUCUNE PARTIE A 
DECOUVERT.
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 4
 ELECTRICAL SAFETY PRECAUTIONS
CAUTION:
1. Handle the power supply cord carefully.  Do
    not damage or deform; it may cause elec-
  tric shock or malfunction when used. Hold
 plug attachment when removing from wall
 outlet. Do not pull on the cord.
2.  To avoid electric shock, do not open   the    
 
 top cover when the unit is plugged in. If
 problems occur with the unit, call American
 Audio® customer support.
3. Do not place metal objects or spill liquid     
 inside or on the turntable. Electric shock
 or malfunction may occur.
I. Heat - The turntable should be situated    
 away from heat sources such as radiators,  
 heat registers, stoves, or other appliances   
  (inclucing amplifliers) that produce heat.
2. Do not let insecticides, benzene, or thin-   
 ner come in contact with the surface of    
 the unit.
3. Never disassemble or modify your unit in    
 any way, doing so will void your manufac-  
 tures warranty.
4. Never plug this unit in to a dimmer pack
5. Do not attempt to operate this unit if it 
 becomes damaged in any way.
6. This unit is intended for indoor use only,    
 use of this product outdoors voids all war-  
 ranties.
7. Always mount this unit in safe and stable
 matter.
8. Disconnect from main power before    
 making any type of connection.
9. Cleaning - The turntable should be clean-   
 ed only as recommended by the manufac- 
 turer.  Use  a  soft  cloth  to  wipe  down      
 the  outside of the unit. For stubborn stains  
 moisten a soft cloth with class cleaner or     
 other mild detergent to wipe away any    
 stains. Use a soft cloth to wipe any residual  
 cleaner. Never use volatile cleaners such     
 as benzene, solvent, or thinner to clean    
 your unit, these cleaners will damage the    
 units surface.          
						

							
ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated dangerous voltage within theproducts enclosure that may be of sufficient magnitudeto constitute a risk of electric shock to persons.
READ INSTRUCTIONS — All the safety and operatinginstructions should be read before the product isoperated.RETAIN INSTRUCTIONS — The safety and operatinginstructions should be retained for future reference.hEED WARNINGS — All warnings on the product andin the operating instructions should be adhered to.FOLLOW INSTRUCTIONS — All operating and useinstructions should be followed.CLEANING — The product should be cleaned only witha polishing cloth or a soft dry cloth. Never clean withfurniture wax, benzine, insecticides or other volatileliquids since they may corrode the cabinet.ATTAChMENTS — Do not use attachments notrecommended by the product manufacturer as theymay cause hazards.WATER AND MOISTURE — Do not use this productnear water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub; in a wet basement;or near a swimming pool; and the like.ACCESSORIES — Do not place this product on anunstable cart, stand, tripod, bracket, or table. Theproduct may fall, causing serious injury to a child oradult, and serious damage to the product. Use onlywith a cart, stand, tripod, bracket, or tablerecommended by the manufacturer, or sold withthe product. Any mounting of the product shouldfollow the manufacturer’s instructions, and shoulduse a mounting accessory recommended by themanufacturer.CART — A product and cart combination should bemoved with care. Quick stops, excessive force, anduneven surfaces may cause the product and cartcombination to overturn.
VENTILATION — Slots and openings in the cabinet areprovided for ventilation and to ensure reliableoperation of the product and to protect it fromoverheating, and these openings must not beblocked or covered. The openings should never beblocked by placing the product on a bed, sofa, rug,or other similar surface. This product should not beplaced in a built-in installation such as a bookcase orrack unless proper ventilation is provided or themanufacturer’s instructions have been adhered to.POWER SOURCES — This product should be operatedonly from the type of power source indicated on themarking label. If you are not sure of the type ofpower supply to your home, consult your productdealer or local power company.LOCATION – The appliance should be installed in astable location.NONUSE PERIODS – The power cord of the applianceshould be unplugged from the outlet when left un-used for a long period of time.
GROUNDING OR POLARIZATION•If this product is equipped with a polarized alternatingcurrent line plug (a plug having one blade wider thanthe other), it will fit into the outlet only one way. Thisis a safety feature. If you are unable to insert the plugfully into the outlet, try reversing the plug. If the plugshould still fail to fit, contact your electrician toreplace your obsolete outlet. Do not defeat thesafety purpose of the polarized plug.•If this product is equipped with a three-wiregrounding type plug, a plug having a third (grounding)pin, it will only fit into a grounding type power outlet.This is a safety feature. If you are unable to insert theplug into the outlet, contact your electrician toreplace your obsolete outlet. Do not defeat thesafety purpose of the grounding type plug.POWER-CORD PROTECTION - Power-supply cordsshould be routed so that they are not likely to bewalked on or pinched by items placed upon oragainst them, paying particular attention to cords atplugs, convenience receptacles, and the point wherethey exit from the product.OUTDOOR ANTENNA GROUNDING — If an outsideantenna or cable system is connected to the product,be sure the antenna or cable system is grounded soas to provide some protection against voltage surgesand built-up static charges. Article 810 of the NationalElectrical Code, ANSI/NFPA 70, provides informationwith regard to proper grounding of the mast andsupporting structure, grounding of the lead-in wireto an antenna discharge unit, size of groundingconductors, location of antenna-discharge unit,c o n n e c t i o n t o g r o u n d i n g e l e c t r o d e s , a n drequirements for the grounding electrode. See FigureA.LIGhTNING — For added protection for this productduring a lightning storm, or when it is left unattendedand unused for long periods of time, unplug it fromthe wall outlet and disconnect the antenna or cablesystem. This will prevent damage to the productdue to lightning and power-line surges.POWER LINES — An outside antenna system shouldnot be located in the vicinity of overhead power linesor other electric light or power circuits, or where itcan fall into such power lines or circuits. Wheninstalling an outside antenna system, extreme careshould be taken to keep from touching such powerlines or circuits as contact with them might be fatal.OVERLOADING — Do not overload wall outlets,extension cords, or integral convenience receptaclesas this can result in a risk of fire or electric shock.
ObJECT AND LIQUID ENTRY - Never push objects ofany kind into this product through openings as theymay touch dangerous voltage points or short-outparts that could result in a fire or electric shock.Never spill liquid of any kind on the product.SERVICING — Do not attempt to service this productyourself as opening or removing covers may exposeyou to dangerous voltage or other hazards. Refer allservicing to qualified service personnel.DAMAGE REQUIRING SERVICE  - Unplug this productfrom the wall outlet and refer servicing to qualifiedservice personnel under the following conditions:• When the power-supply cord or plug is damaged.•If liquid has been spilled, or objects have fallen intothe product.•If the product has been exposed to rain or water.•If the product does not operate normally by followingthe operating instructions. Adjust only those controlsthat are covered by the operating instructions as animproper adjustment of other controls may result indamage and will often require extensive work by aqualified technician to restore the product to itsnormal operation.•If the product has been dropped or damaged in anyway.• When the product exhibits a distinct change inperformance — this indicates a need for service.REPLACEMENT PARTS -- When replacement partsare required, be sure the service technician has usedreplacement parts specified by the manufacturer orhave the same characteristics as the original part.Unauthorized substitutions may result in fire, electricshock, or other hazards.SAFETY ChECk - Upon completion of any service orrepairs to this product, ask the service technician toperform safety checks to determine that the productis in proper operating condition.WALL OR CEILING MOUNTING — The product shouldnot be mounted to a wall or ceiling.hEAT — The product should be situated away from heatsources such as radiators, heat registers, stoves, orother products (including amplifiers) that produceheat.
IMPORTANT SAFETY INSTRUCTIONS
ANTENNALEAD INWIRE
GROUNDCLAMP
ANTENNADISCHARGE UNIT(NEC SECTION 810-20)
GROUNDING CONDUCTORS(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)
ELECTRICSERVICEEQUIPMENT
Fig. A
NEC — NATIONAL ELECTRICAL CODE
C A U T I O N : T O R E D U C E T H E R I S K O F E L E C T R I C SHOCK, DO NOT REMOVE THE COVER (OR BACK). T H E R E A R E N O U S E R S E R V I C E A B L E P A R T S INSIDE  REFER SERVICE TO YOUR AUTHORIZED AMERICAN AUDIO® SERVICE TECHNICIAN.
 ELECTRICAL SAFETY PRECAUTIONS
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 5 
						

							
 PRODUCT INFORMATION
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 6
WARRANTY INFORMATION
The TT-RECORD™  carries  a ONE  year  (365 
days)  limited  warranty.  This  warranty  covers 
parts  and  labor.  Please fill  out  the  enclosed 
warranty  card  to  validate  your  purchase  and 
warranty.  All  returned  service  items  whether 
under  warranty  or  not,  must  be  freight  pre-
paid  and  accompany  a  return  authorization 
(R.A.)  number.  If  the  unit  is  under  warranty, 
you  must  provide  a  copy  of  your  proof  of  pur-
chase invoice. Please contact American Audio® 
customer  support at  (800) 322-6337 for  a  R.A. 
number.  All  packages  not  displaying  a  R.A. 
number  on  the  outside  of  the  package  will  be 
returned to the shipper.
Customer Support:  American Audio® pro-
vides  a  toll  free  customer  support  line,  to  pro-
vide  set  up  help  and    to  answer  any  question 
should  you  encounter  problems  during  your 
set up or initial operation. You may also visit us 
on  the  web  at  www.americanaudio.us  for  any 
comments  or  suggestions. For  service  related 
issue please contact American Audio®. Service 
Hours  are  Monday  through  Friday  9:00  a.m.  to 
5:00 p.m. Pacific Standard Time.
  Voice: (800) 322-6337
  Fax:   (323) 582-2941
  E-mail:  [email protected]
To purchase parts online visit 
http://parts.americandj.com
Warning! To  prevent  or  reduce  the  risk  of 
electrical  shock  or  fire,  do  not  expose  this  unit 
to rain or moisture. 
Caution! There are no user serviceable parts 
inside  this  unit.  Do  not  attempt  any  repairs 
yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may 
require  service  please  contact  customer  sup-
port.  Please  do  not  return  to  your  dealer  with-
out first contacting customer support. 
The  shipping  carton  and  packing  materi-
als  are  constructed  of  recyclable  material, 
please recycle when ever possible.
Features:  
 •  Metal Tone Arm
 •  Belt Drive Platter Motor
 •  Large Platter Start/Stop Button
 •  2 Speeds (33 & 45 RPM)
 •  45 Adapter for 7" Records
    •  Adjustable Feet for Leveling
   •  Anti-Skating Tone Arm Adjustment
   •  Tone Arm Holder with Lock 
 
Please  carefully  read  and  understand  the 
instructions  in  this  manual  thoroughly  before 
attempting  to  operate  this  unit.  These  instruc-
tions  contain  important  safety  information 
regarding the use and maintenance of this unit. 
Take special care to follow all warning symbols 
and  labels  both  on  the  unit  and  printed  in  this 
manual. Also,  Please keep this manual with the 
unit, for future reference. 
						

							
 QUICk-START
Turntable Quick-Start:
1. Changing Platter Speed
Use the RPM selectors (5 & 6) to change the platter speeds. 
2. Start/Stopping Platter
Use the Start/Stop Button (7) to start and stop playback.
3. Pitch Control
1.    The pitch adjustment is a fine adjustment to the platter's RPMs.
2. The pitch adjustment is variable and may be adjusted between -10% and +10% of the platter     
 selected speed.
3. The pitch is changed by sliding the Pitch Slider (3) in an up and down motion. 
Product Service:
1. Clean the stylus periodically with a soft brush to prevent the accumulation of dust. 
2. When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it     
 with a new one. 
3. From time to time, the turntable should be wiped down with a soft, dry cloth.
4. Volatile materials should not be used, such as:  alcohol, thinner, benzine etc. They may remove     
 the paint or damage the luster.
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 7 
						

							
Some  assembly  required  before  you  can  begin  to  use  your  new  TT-Record.  Please  follow  the 
assembly instruction below before attempting to use you new turntable.
ASSEMBLY:
Before you begin assembly please be sure all parts and accessories have arrived intact. Please use 
the check list below to identify and order parts and accessories.
  ASSEMbLY
This  unit has  been  thoroughly  tested  and  has  been  shipped  in  perfect  operating  condition.  Care-
fully  check  the  shipping  carton  for  damage  that  may  have  occurred  during  shipping.  If  the  carton 
appears to be damaged, carefully inspect your unit for any damage. Be sure all accessories needed 
to  operate  the  unit  has  arrived  intact.  In  the  event  damage  has  been  found  or  parts  are  missing, 
please contact our toll free customer support number for further instructions. Please do not return 
the unit to your dealer without first contacting customer support. 
Headshell 
Slipmat 
Turntable Platter 
Rubber Foot 
Counter Weight 
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 8
45 RPM Adapter 
Headphone Adapter  
						

							
  SET-UP
NOTES:
• Do not connect the AC power plug before assembly has been completed.
• Before turning the power on, make sure once again all the connections and power voltage set-   
 tings are correct. Always turn off the power when connecting or disconnecting.
• Read this manual carefully before using the unit. Be sure to store the manual in a safe place for     
 future reference. 
• Attach a stylus cartridge to the Headshell (10) before assembling the turntable unit.
Headshell and Cartridge Assembly:
When  installing  a  cartridge,  refer  to  the  operating  instructions  of  that  cartridge.  During  installation, 
attach the stylus protector to guard the stylus tip from damage.
    Connect the Headshell (10) lead wires to the cartridge terminals. The terminals of cartridges     
      and the Headshell (10) lead wires are color coded. Connect each lead wire to the cartridge     
   terminals of the same color.
      White (L+) .............……………......Left channel +
      Blue (L-) ....……………................Left channel -
      Red (R+) ..…………....................Right channel +
      Green (R-) .......……………............Right channel -
Turntable Assembly:
1.  Removing from carton:
Carefully  remove  the  main  unit  with  the  packing  material  intact  from  the  box.  Remove  the  packing 
material once the unit has been removed from the shipping carton. All accessories should be located 
in the packing material.
2. Turntable Platter (1):
Remove  the  turntable  platter  from  the  packing  material  and  gently  insert  the  platter  into  the  center 
spindle on the base of the turntable unit.
3.  Drive Hub:
Pull the belt to the lower side of the turntable over the drive hub.
4.  Slipmat:
Remove the black slipmat from the packaging and place it on the Platter (1).
5. Headshell (10):
Insert the Headshell (12) into the front end of the Tonearm Assembly (2). While holding Headshell (10) 
firmly into the front end of the tonearm assembly, turn the Headshell Locking Nut (11) counter-clock-
wise to firmly secure the Headshell (10) to Tonearm Assembly (2).
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 9 
						

							
6. Counterweight (16):
Locate  and  remove  the  tonearm  Counterweight  (16)  from  the  packaging.  Slide  Counterweight  (16) 
onto the rear of the Tonearm (12). Turn it lightly and it will screw onto the rear shaft of the tonearm.
Anti-Skate:
The anti-skate adjustment prevents the Tonearm Assembly (2) from skipping across the record from 
the  centrifugal  force  that  is  caused  spinning  rotation  of  the  Platter  (1).  The  Anti-Skating  (15)  control 
knob should be set to the same value as the stylus pressure. For example if your Counterweight (16) 
is set to 2.5 grams the Anti-Skate (15) value should also be set to 2.5.
Turntable Connections:
1. Connect the unit's stereo output leads to a receiver or mixer. The red phono terminal represents   
 the right output channel and the white terminal represents the left output channel. 
     Output Leads          Mixer (Receiver)
     L (White)   ----------------------------->    L Channel
      R (Red) ----------------------------->    R Channel
     
2. Connect the power core to matching outlet for your area. Only connect the power cord after the   
 all other connections have been made.
   SET-UP
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 10
Stereo phono leadStereo line lead