American Audio Turntable TT Record User Manual

USER INSTRUCTIONS
    TT-Record
6122 S. Eastern Ave.
Los Angeles Ca. 90040
www.AmericanAudio.us
Turntable Mp3 Recorder
"Fast, Easy, and Reliable"
 1/08 

©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 2 

©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 3
ELECTRICAL SAFETY PRECAUTIONS.............................................................\
.....................................4
INSTALLATION      gUIdLINES....................................................................................................................5
PRO dUCT      INFORM...

WARNING: TO PREVENT FIRE OR ELECTRIC 
SHOCK  HAZARD,  DO  NOT  EXPOSE  THIS 
UNIT TO RAIN, LIQUIDS, OR MOISTURE 
The  serial  and  model  number  for  this  unit  is 
located  on  the  rear  panel.  Please  write  down 
the  numbers  here  and  retain  for  future  refer-
ence. 
Model No._____________________________
Serial No._____________________________
Purchase Notes:
Date of Purchase_______________________
Dealer Name__________________________
Dealer Address_________________________...

ELECTRICAL PRECAUTIONS
RISK OF ELECTRIC SHOCKDO NOT OPEN
CAUTION
The exclamation point within an equilateral triangle isintended to alert the user to the presence of importantoperating and maintenance (servicing) instructions inthe literature accompanying the appliance.
The lightning flash with arrowhead symbol, within anequilateral triangle, is intended to alert the user to thepresence of uninsulated dangerous voltage within theproducts enclosure that may be of sufficient magnitudeto constitute a risk...

 PRODUCT INFORMATION
©American Audio®   -   www.americanaudio.us   -   TT-Record™ Instruction Manual Page 6
WARRANTY INFORMATION
The TT-RECORD™  carries  a ONE  year  (365 
days)  limited  warranty.  This  warranty  covers 
parts  and  labor.  Please fill  out  the  enclosed 
warranty  card  to  validate  your  purchase  and 
warranty.  All  returned  service  items  whether 
under  warranty  or  not,  must  be  freight  pre-
paid  and  accompany  a  return  authorization 
(R.A.)  number.  If  the  unit...

 QUICk-START
Turntable Quick-Start:
1. Changing Platter Speed
Use the RPM selectors (5 & 6) to change the platter speeds. 
2. Start/Stopping Platter
Use the Start/Stop Button (7) to start and stop playback.
3. Pitch Control
1.    The pitch adjustment is a fine adjustment to the platter's RPMs.
2. The pitch adjustment is variable and may be adjusted between -10% and +10% of the platter     
 selected speed.
3. The pitch is changed by sliding the Pitch Slider (3) in an up and down motion. 
Product...

Some  assembly  required  before  you  can  begin  to  use  your  new  TT-Record.  Please  follow  the 
assembly instruction below before attempting to use you new turntable.
ASSEMBLY:
Before you begin assembly please be sure all parts and accessories have arrived intact. Please use 
the check list below to identify and order parts and accessories.
  ASSEMbLY
This  unit has  been  thoroughly  tested  and  has  been  shipped  in  perfect  operating  condition.  Care-
fully  check  the  shipping  carton...

  SET-UP
NOTES:
• Do not connect the AC power plug before assembly has been completed.
• Before turning the power on, make sure once again all the connections and power voltage set-   
 tings are correct. Always turn off the power when connecting or disconnecting.
• Read this manual carefully before using the unit. Be sure to store the manual in a safe place for     
 future reference. 
• Attach a stylus cartridge to the Headshell (10) before assembling the turntable unit.
Headshell and Cartridge...

6. Counterweight (16):
Locate  and  remove  the  tonearm  Counterweight  (16)  from  the  packaging.  Slide  Counterweight  (16) 
onto the rear of the Tonearm (12). Turn it lightly and it will screw onto the rear shaft of the tonearm.
Anti-Skate:
The anti-skate adjustment prevents the Tonearm Assembly (2) from skipping across the record from 
the  centrifugal  force  that  is  caused  spinning  rotation  of  the  Platter  (1).  The  Anti-Skating  (15)  control 
knob should be set to the same value as...