American Audio CDMp3 PLAYER Encore 1000 User Manual

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 21
 BASIC OPERATIONS (CONT.)
2) Press the IN BUTTON (10). This will set the starting point of the     
  SEAMLESS LOOP. The IN BUTTON (10) LED will light.
1) Press PLAY/PAUSE BUTTON (11) to activate playback   
 mode.   
Figure 18
Figure 17
3)  Press the OUT BUTTON (10) to set the ending point for your LOOP 
  (Figure 19). The IN BUTTON (10) and OUT BUTTON (10) LEDs will 
   immediately begin to flash rapidly,...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 22
 BASIC OPERATIONS (CONT.)
REPLAY LOOP - The RELOOP function allows you to return to your stored 
loop at any time. The IN BUTTON (10) and OUT BUTTON (10) LEDs will indicate 
a loop is stored in memory, and may be played at any time. To replay the loop, 
press the RELOOP BUTTON (10). The IN BUTTON (10) and OUT BUTTON (10) 
LEDs will again begin to flash indicating SEAMLESS LOOP mode has been 
activated and your loop...

 PITCH ADJUSTMENTS
1. PITCH SLIDER (5):
This function will increase or decrease the tracks playback speed or "PITCH." 
The  maximum  pitch  percentage  manipulation  in  this  function  is  +/-100%.  The 
PITCH SLIDER (5)  is used to decrease or increase the playback pitch. If the 
slider is moved up (towards the top of the unit) the pitch will decrease, if the 
slider is moved down (towards the bottom of the unit) the pitch will increase. 
The PITCH SLIDER(5) adjustment can be changed to range...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 24
 PITCH ADJUSTMENTS
2. PITCH BENDING: 
Unlike the PITCH SLIDER (5) adjustment this function will momentarily increase or decrease a tracks speed 
during playback. There are two ways to operate this function with the  (-)  &  (+) PITCH BEND BUTTONS (8) or 
with the JOG WHEEL (9).  The  maximum  pitch  bend  percentage  allowed  is  +/-  100%.  The  pitch  bend  func-
tion  will  work  in  conjunction  with  the PITCH...

 PITCH ADJUSTMENTS
Figure 29
3. JOG WHEEL (9):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode. 
Rotating the wheel in a clockwise direction will increase your track pitch and 
rotating the wheel in a counter-clockwise direction will slow your track pitch. 
The speed you rotate the JOG WHEEL will determine pitch bend percentage 
(%).  For  example,  if  the JOG WHEEL is continuously turned in a counter-
clockwise direction the playback speed will steadily decrease and will...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 26
ACCESSING MP3 FOLDERS
ACCESS MP3 FOLDERS :
Use this function to access the different folders (files) located on your Mp3 disc.   
1) Press the FOLDER BUTTON (2) so that the FOL-
  DER LED lights up. The artist and song title    
  should appear in the CHARACTER DISPLAY (52) 
  and the Folder number will appear in the FOLDER  
  INDICATOR (42). 
2) Now, press the TRACK BUTTONS (15)  to  
  scroll forward or backwards...

MIXER SET-UP
CASSETTE DECK
©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 27
This image details a typical DJ Set Up consisting of a microphone, 
Mp3 player, CD players, and a tape deck.
Note: Turntables cannot be connected to the ENCORE 1000.  

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 28
MIXER SET-UP
American Audio V4001™
Speaker Cables
Typical Balanced Output Set-up
This image details a typical stereo output layout. Note the use of the Balanced XLR Jacks on both 
the mixer and the amplifier.  Always use the balanced output jacks whenever possible. The balanced 
output jacks should always be used for cable runs in excess of 15 feet. 
Using the balanced jacks will ensure a clean signal through out the...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 29
The crossfader is “Hot Swapable” which means it may be replaced at any time, even when power is 
applied. Only replace with American Audio Part Feather Fader Plus. Replacing with any o\
ther model 
fader may seriously damage your mixer. Please, always use insulated tools. 
Replacing the Crossfader:
1.  Using a Phillips screw driver, unscrew the six stainless steel retainer screws that hold the mixer    
 face plate...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 30
WARRANTY INFORMATION: The ENCORE 1000 carries a ONE  year  (365  days)  limited war-
ranty. This warranty covers parts and labor. Please fill out the enclosed warranty card to validate your 
purchase and warranty. All returned service items whether under warranty or not, must be frei\
ght 
pre-paid and accompany a return authorization (R.A.) number. If the unit is under warranty, you must 
provide a copy of your...