American Audio CDMp3 PLAYER Encore 1000 User Manual

the OUT BUTTON (10). LOOP will appear in the LCD DISPLAY (16) when the RELOOP function is 
available.
11. PLAY/PAUSE BUTTON - Each press of the PLAY/PAUSE BUTTON causes the operation to 
change from play to pause or from pause to play. While in play mode the blue play LED will glow, and 
while in pause mode the blue play LED will flash.
12. SCRATCH BUTTON - This button is used to activate and deactivate the Scratch effect.
13. CUE - Pressing the CUE button during playback immediately pauses playback and...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)                                       MIXER
B. MIXER CONTROLS (FIGURE 4)
17. SOURCE SELECTOR SWITCH - These switches are used to select the input source assigned to 
each channel. Each channel may only be assigned one input source at a ti\
me. 
18. AUX INPUT - This  Aux  input  is  for  the  use  of  a  Mp3  player. Input volume will be controlled by 
the channel two fader.
19. CHANNEL GAIN CONTROL - This adjustment is used to adjust an audio source signal input...

 for a maximum midrange gain of +12dB or maximum decrease of -30dB. Turning the knob in a   
 counter-clockwise direction will decrease the amount of midrange applied\
 to a channel signal, 
 turning the knob in a clockwise direction will increase the amount of mi\
drange applied to a    
 channel signal.
 BASS CONTROL - This knob is used to adjust the low frequency levels of a channel allowing    
 for a maximum bass gain of +12dB or maximum signal decrease of -30dB. Turning the k nob in   
 a...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)             FRONT & REAR PANEL
©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 14
Figure 6
Figure 5
323031
C. FRONT PANEL (FIGURE 5)
30. TRANSPORT TRAY 1 - This tray is used to load and unload a compact disc. The tray is opened 
and closed by pressing the OPEN/CLOSE BUTTON (1). Never attempt to force the transport tray open 
or closed when the power is turned off.
31. HEADPHONE JACK - This jack is used to connect your...

 GENERAL FUNCTIONS AND CONTROLS (Cont.)            FRONT & REAR PANEL
©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 15
35. LINE 2 INPUT JACKS - DO NOT CONNECT TURNTABLES TO THESE JACKS! CD players, Tape 
Decks and other line level instruments may be connected to these jacks. The red colored RCA jack 
represents the right channel input and the white represents the left channel input. Input volume will 
be controlled by channel two fader. The channel SOURCE SELECTOR...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 16
 GENERAL FUNCTIONS AND CONTROLS (Cont.)                      CD PLAYER LCD
E. LCD DISPLAY PANEL (FIGURE 7)
41.  CUE INDICATOR - This indicator will glow when the unit is in CUE or PAUSE mode and will flash every time a new 
CUE POINT is set.
42.  FOLDER INDICATOR - This indicator details the current selected folder.  
43.  TIME BAR INDICATOR - This bar gives a visual approximation of a track's or disc's...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 17
INTERNAL MENU
Hold TIME BUTTON (3) for 3 seconds to enter the internal menu. Use the TRACK BUTTONS (15) or turn 
the JOG WHEEL (9) to scroll through the different menus and press the +10 BUTTON (15) to enter the cor-
responding submenu. Press the TRACK BUTTONS (15) or turn the JOG WHEEL (9) to change the submenus 
and press TIME BUTTON to memorize your settings in any operating mode and exit\
 the menu.
1....

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 18
 BASIC OPERATIONS
Figure 9: Tapping the reverse 
track button will jump back 
to the previous track.
Figure 10: Tapping the for-
ward track button will skip 
forward to the next track.
2. SELECTING TRACKS
Select a desired track by using the TRACK BUTTONS (15). Tapping the TRACK BUTTONS (15) once will select 
either the next higher or lower track. You can hold down the TRACK BUTTONS (15) to change tracks continu-...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 19
3. STARTING PLAYBACK - Figure 11
Load an audio CD as describe on page 18 (LOADING/EJECTING DISCS).  
Pressing the PLAY/PAUSE BUTTON (11) with an audio CD loaded will immediate-
ly start playback. The PLAY (58) indicator will glow as soon as playback begins. 
The point at which playback starts (cue point) will automatically be stored in the 
memory as the cue point. The unit will return to this cue point (the point at...

©American Audio®   -   www.AmericanAudio.us   -   Encore 1000 Instruction Manual Page 20
 BASIC OPERATIONS (CONT.)
1) You may press the IN BUTTON (10) on the fly (while the disc is playing). This
  will set a CUE Point without music interruption. Pressing the CUE BUTTON    
 (13) will now return you to the same point that you pressed the IN BUTTON    
 (10).  
2) You may also use the JOG WHEEL (9) to set a cue point. While a disc is
  in PAUSE or CUE mode, use the JOG WHEEL (9) to scroll through a track...