Amcrest IP3M-941 Dual Band PT Camera User Manual

81 
 
5.4.3.1.2 Video Tamper 
This tab allows the user to modify video tamper settings. Below is a screenshot of the Video Tamper tab: 
 
Below is an explanation of the fields on the Video Tamper tab: 
 Enable: This checkbox enables a video tamper alarm for the camera. 
 Working Period: Clicking this button opens a weekly schedule that can be used to set times. 
o Click and drag to set video tampering for certain days of the week. Also, periods of video tampering 
can be set for each day and enabled...

82 
 
5.4.3.2 Audio Detection 
This menu allows the user to modify audio detection settings. Below is a screenshot of the Audio Detect screen:  
 
Below is an explanation of the fields on the Audio Detect tab: 
 Enable: This checkbox enables an audio detection alarm for the camera. 
 Enable Intensity Change: This checkbox enables intensity change for the camera audio. 
o Sensitivity is the amount of change required to increase the audio detected by a percentage. The 
lower the sensitivity, the more...

83 
 
 Record: This checkbox allows the user to enable the camera to record video when an audio detection alarm is 
triggered. 
 Record Delay: his field specifies in seconds how long the delay between alarm activation and recording should 
be. 
 Relay Out: This checkbox allows the user to enable the camera to trigger a connected alarm (connected to the 
alarm port on the back of the camera) when an audio detection alarm is triggered. 
 Alarm Delay: This field specifies in seconds how long the delay...

84 
 
o Click and drag to set alarm activation for certain days of the week. Also, periods of relay activation 
can be set for each day and enabled using the period settings on the bottom half of the screen. There 
are a total of 6 periods that can be set. 
 Anti-Dither: This field allows the user to set the anti-dither time. The values in this field can range from 5 to 
600 seconds. This time value controls how long the alarm signal lasts. Based on relay activation, a buzzer can 
go off, a tour can...

85 
 
5.4.3.4 Abnormality 
This menu has 3 tabs: SD Card, Network, and Illegal Access 
5.4.3.4.1 SD Card 
This tab allows the user to set the camera’s response to an SD card related abnormality. Below is a screenshot of 
the SD card tab screen:  
 
Below is an explanation of the fields on the SD Card settings tab: 
 Event Type: This dropdown box allows the user to select which SD card abnormality to set event triggers for. 
The 3 options are No SD Card, SD Card Error, and Capacity Warning. 
 Enable:...

86 
 
5.4.3.4.2 Network 
This tab allows the user to set the camera’s response to a Network related abnormality. Below is a screenshot of 
the Network tab screen:  
 
Below is an explanation of the fields on the Network settings tab: 
 Event Type: This dropdown box allows the user to select which Network abnormality to set event triggers for. 
The 2 options are Disconnection and IP Conflict. 
 Enable: This checkbox enables the Network abnormality trigger for the camera. 
 Record: This checkbox allows...

87 
 
5.4.3.4.3 Illegal Access 
This tab allows the user to set the camera’s response to an Illegal Access related abnormality. Below is a 
screenshot of the Illegal Access tab screen:  
 
Below is an explanation of the fields on the Illegal Access settings tab: 
 Enable: This checkbox enables the Illegal Access abnormality trigger for the camera. 
 Login Failure: This field allows the user to specify how many failed login attempts must be attempted in order 
to trigger an Illegal Access abnormality...

88 
 
5.4.4 Storage 
This menu section allows the user to change storage settings for the camera. 
5.4.4.1 Schedule 
The schedule menu manages the recording schedule for the camera. This menu has 3 tabs: Record Schedule, 
Snapshot Schedule, and Holiday Schedule. 
5.4.4.1.1 Record Schedule 
This tab is where video recording settings are configured. Below is a screenshot of the Record Schedule settings 
screen: 
  
Below is an explanation of the fields on the Record Schedule settings tab: 
 Record Type:...

89 
 
To reset to default settings, click the Reset Defaults button. To refresh the page, click the Refresh button. To save 
the settings, click the Save button. 
5.4.4.1.2 Snapshot Schedule 
This tab is where snapshot recording settings are configured. Below is a screenshot of the Snapshot Schedule 
settings screen: 
  
Below is an explanation of the fields on the Snapshot Schedule settings tab: 
 Record Type: These checkboxes allow the user to select which snapshot type they want to configure on the...

90 
 
5.4.4.1.3 Holiday Schedule 
This tab is where holiday settings are configured. Below is a screenshot of the Holiday Schedule settings screen: 
 
 
Below is an explanation of the fields on the Holiday Schedule settings tab: 
 Record Type: These checkboxes allow the user to select which recording type they want to configure on the 
schedule. There are 2 types of recordings: 
o Record: This checkbox is referring to video recording. 
o Snapshot: This checkbox is referring to snapshot recording. 
...