Aluratek 2 POWER RECEPTACLE 110V 4 SNAPIN CONNECTORS DS901120 User Guide

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121/
//
/Sec
SecSec
Sectional Plates for PNP415/417C
tional Plates for PNP415/417Ctional Plates for PNP415/417C
tional Plates for PNP415/417C 
  
  
  
 User’s Guide 
  
 
400-0441-003 
 
         
1 
Welcome! 
We greatly appreciate your purchase of the DS901-120/121 Sectional Plate 
for PNP415/417C Interconnect Box. We are sure you wi ll find it reliable and 
simple to use. Superior performance for the right pri ce, backed by solid 
technical and...

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
2 
4. Technical Specifications 
Specifications are subject to change. See www.altinex.com for up-to-date information. 
 
  Features/Description  DS901-120/121 
 DS901-120  Pass-Through Connections 
 Video (1)  15-pin HD female to male 
 Power (2)  NEMA 5-15R to NEMA 5-15P 
 Network (2)  RJ-45 female to RJ-45 male 
 Modem (1)  RJ-11 female to RJ-11 male 
 Stereo Audio (1)  3.5mm female to 3.5mm...

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
3 
 
 
5. About Your DS901-120/121 
The DS901-120 and DS901-121 are sectional plates for use with the PNP415/417C Pop ‘N Plug Interconnect B ox.  The sectional plates offer female receptacles in 
the pop up panel and six foot long cables running fro m the panel down to their equivalent male plugs at the opposite end. 
DS901-120 Audio/Video Sectional Plat
e 
The DS901-120 is preconfigured with 2...

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
4 
6. Application Diagrams  
Diagram 1: Typical Setup 
   
DS901-120
REVERSE SIDE
OF PNP
DS901-121
   

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
5 
Diagram 2: Installation Step 1 
                           
Diagram 3: Installation Step 2 
   
Remove 4 screws.
The screws are located at the top 
of the side metal. There are two (2) 
screws per side.
 
Remove Top Cover
4 screws removed 
in previous step.
Remove the top cover 
by lifting straight up.
   

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
6 
Diagram 4: Installation Step 3 
                           
Diagram 5: Installation Step 4 
   
Slide out existing panel.
If the existing panel has cables attached, 
carefully guide them through the 
opening at the bottom of the unit.
 
Feed DS901-120/121 Cables
Route the cables down from the top 
of the PNP chassis. Make sure the cables 
feed through the bottom of the unit on 
the same side...

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
7 
Diagram 6: Installation Step 5 
                           
Diagram 7: Installation Step 6 
   
Install DS901-120/121 Panel
Panel Guides
Panel Guides
Slide the DS901-120/121 into 
the PNP chassis using the 
panel guides as shown.
 
Replace Top Cover
Replace the top cover by  aligning the holes from the top cover bracket with the 
mounting holes in the side  
panels.
Reinstall the four (4)...

DS901
DS901 DS901
DS901-
--
-120/121
120/121120/121
120/121 
  
 User’s Guide 
  
 
400-0441-003 
 
         
8 
7. Operation  
7.1 General Operation  
The DS901-120/121 does not require any adjustments for proper operation. 
Once installed, the DS901-120/121 will operate troub le free with no user 
intervention. 
7.2 Power/Signal Connections 
Connect external devices to the appropriate connect or on the 
DS901-120/121.  Remember, the devices plugged into t he AC power 
connectors should not draw more...