Home
>
Alpha Tool.Com.HK Limited
>
Cutting System
>
Alpha Tool.Com.HK Limited Stone Cutter AWS125225 User Manual
Alpha Tool.Com.HK Limited Stone Cutter AWS125225 User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Stone Cutter AWS125225 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 22
22
Proper Alignment
4. Install new carbon brush with the proper alignment of the brush holder f\
ollowed by the
cap as shown in Figure 25.
Figure-25
Old Carbon Brush
worn down to a quarter
of an inch (1/4”).
New Carbon Brush
Figure-24
3. Check the carbon brush for wear. Replace if worn down to a 1/4" or if spring is
damaged.](http://img.usermanuals.tech/thumb/326/5166/w64_stone-cutter-aws125225-user-manual-1478733661_d-21.png "Page 22
22
Proper Alignment
4. Install new carbon brush with the proper alignment of the brush holder f\
ollowed by the
cap as shown in Figure 25.
Figure-25
Old Carbon Brush
worn down to a quarter
of an inch (1/4”).
New Carbon Brush
Figure-24
3. Check the carbon brush for wear. Replace if worn down to a 1/4\" or if spring is
damaged.")
![Page 23
23
Note: If you notice any resistance while tightening the carbon brush cap, it is an indication
that the top plate on the carbon brush assembly is sticking inside the b\
rush cap.
Continuing to tighten will damage the carbon brush spring. (Go to step 6 to correct
this problem)
5. Tighten cap until secure as shown in
Figure 26.
6. Remove the cap and carbon brush from the tool, visually check the two parts for
defects as shown in Figure 27.
Figure-26
Figure-27
Carbon Brush CapTop Plate](http://img.usermanuals.tech/thumb/326/5166/w64_stone-cutter-aws125225-user-manual-1478733661_d-22.png "Page 23
23
Note: If you notice any resistance while tightening the carbon brush cap, it is an indication
that the top plate on the carbon brush assembly is sticking inside the b\
rush cap.
Continuing to tighten will damage the carbon brush spring. (Go to step 6 to correct
this problem)
5. Tighten cap until secure as shown in
Figure 26.
6. Remove the cap and carbon brush from the tool, visually check the two parts for
defects as shown in Figure 27.
Figure-26
Figure-27
Carbon Brush CapTop Plate")
![Page 24
24
7. Check to see if the two parts move freely by pushing the top plate of th\
e carbon
brush into the recess on the bottom of the carbon brush cap and rotate.
Carbon Brush and Cap
Figure-28
Top Plate
8. If the two parts stick together, replace the carbon brush cap and repeat step 7.
9. If the top plate of the carbon brush sticks in the new cap, you need to \
replace the
carbon brush and repeat step 7.
10. Keep trying until carbon brush top plate can move freely inside of the r\
ecess on the...](http://img.usermanuals.tech/thumb/326/5166/w64_stone-cutter-aws125225-user-manual-1478733661_d-23.png "Page 24
24
7. Check to see if the two parts move freely by pushing the top plate of th\
e carbon
brush into the recess on the bottom of the carbon brush cap and rotate.
Carbon Brush and Cap
Figure-28
Top Plate
8. If the two parts stick together, replace the carbon brush cap and repeat step 7.
9. If the top plate of the carbon brush sticks in the new cap, you need to \
replace the
carbon brush and repeat step 7.
10. Keep trying until carbon brush top plate can move freely inside of the r\
ecess on the...")
31 PRODUCT REGISTRATION CARD Model No. Serial No. Company Name: ______________________________________________ Name: ______________________________________________________ Address: ____________________________________________________ City: _______________________State: ________Zip: ________________ Telephone: ___________________________________________________ Purchase Date: _______________________________________________ Dealer’s Name: _________________________________ Note: Serial & Model Number must be included for proper registration. (800) 648-7229 Mail or Fax to: Alpha Professional Tools® 103 Bauer Drive, Oakland, NJ 07436 Fax: 800-286-0114 Register online at: www.alpha-tools.com/productregistration.aspx
Copyright © 2008 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114www.alpha-tools.com 2/27/2013