Home
>
Alpha Tool.Com.HK Limited
>
Cutting System
>
Alpha Tool.Com.HK Limited Adapter EZ TCutter User Manual
Alpha Tool.Com.HK Limited Adapter EZ TCutter User Manual
View the Alpha Tool.Com.HK Limited Adapter EZ TCutter User Manual for free. All the Alpha Tool.Com.HK Limited manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 2
2
1 Bolt8Cutting Head
2 Threaded Pin 9Scale Indicator
3 Cap Nut 10 Rubber Cap
4 Scaled Bar 11Two-Holed Washer
5 Roller Housing 12Oil Reservoir Cap
6 Guide Rollers 13 Rubber Handle
7 Cutting Head Holder 14Fixation Screw
TaBle OF CONTeNTS
Introduction ........................................................................\
................................ 3
About the Symbols ........................................................................\
.................... 3
General Safety Instructions...](http://img.usermanuals.tech/thumb/326/5174/w300_adapter-ez-tcutter-user-manual-1478734141_d-1.png "Page 2
2
1 Bolt8Cutting Head
2 Threaded Pin 9Scale Indicator
3 Cap Nut 10 Rubber Cap
4 Scaled Bar 11Two-Holed Washer
5 Roller Housing 12Oil Reservoir Cap
6 Guide Rollers 13 Rubber Handle
7 Cutting Head Holder 14Fixation Screw
TaBle OF CONTeNTS
Introduction ........................................................................\
................................ 3
About the Symbols ........................................................................\
.................... 3
General Safety Instructions...")
![Page 3
3
Thank you for purchasing the Alpha® EZ Thin Panel T-Cutter. Please read this
instruction manual thoroughly to ensure safe and correct use of the EZ T\
hin Panel
T-Cutter. Keep this manual in a place where operators can access it easily whene\
ver
necessary.
ABOuT THE SymBOlS
according to the hazard level, all safety notes in this manual are classified into
“DANGER”, “W ARNING”, and “CA u TION”.
DANGER! Death or serious personal injury is imminent when handling this
T-Cutter incorrectly....](http://img.usermanuals.tech/thumb/326/5174/w300_adapter-ez-tcutter-user-manual-1478734141_d-2.png "Page 3
3
Thank you for purchasing the Alpha® EZ Thin Panel T-Cutter. Please read this
instruction manual thoroughly to ensure safe and correct use of the EZ T\
hin Panel
T-Cutter. Keep this manual in a place where operators can access it easily whene\
ver
necessary.
ABOuT THE SymBOlS
according to the hazard level, all safety notes in this manual are classified into
“DANGER”, “W ARNING”, and “CA u TION”.
DANGER! Death or serious personal injury is imminent when handling this
T-Cutter incorrectly....")
![Page 4
4
1
11
10
3
4
12
13
2
56
9
914
7
8
10
DETAIL “B”
DETAIL “A”
“A”
“B”
ASSE m B ly INSTR u CTIONS
1. Set the scaled bar (4) onto the pre-mounted bolt (2) of the roller housing (5).
m
ake sure that the rollers in the roller housing are in the correct posit\
ion as the
picture. (Detail “A”)
*Tip: See page 7 for instructions on replacing the guide roller.
2. Fasten the bolt (1) and the cap nut (3). The 2-hole washer (11) should be placed as the schematic indicates.
*Tip: Check if the...](http://img.usermanuals.tech/thumb/326/5174/w300_adapter-ez-tcutter-user-manual-1478734141_d-3.png "Page 4
4
1
11
10
3
4
12
13
2
56
9
914
7
8
10
DETAIL “B”
DETAIL “A”
“A”
“B”
ASSE m B ly INSTR u CTIONS
1. Set the scaled bar (4) onto the pre-mounted bolt (2) of the roller housing (5).
m
ake sure that the rollers in the roller housing are in the correct posit\
ion as the
picture. (Detail “A”)
*Tip: See page 7 for instructions on replacing the guide roller.
2. Fasten the bolt (1) and the cap nut (3). The 2-hole washer (11) should be placed as the schematic indicates.
*Tip: Check if the...")