Alpha Tool.Com.HK Limited Polisher WDP120 User Manual

31
ALPHA® WDP-120 PARTS LIST 
DRAWING	NO. PART	NO. DESCRIPTIONQUANTITY
71 210105Pin	Wrench 1
not	shown 210087Blow	Mold	Case 1
72 500032Main	Cover 1
73 500033Sub	Cover 1
74 500034Half	Cover 1
75 500041Brush-A 1
76 500042Brush-B 1
77 500037Screw	M4x10 4
78 500005Rubber	Hose	Adapter 1
79 310008Stainless	Steel	Hose	Band 1
80 310009Rubber	Cap 1
59 310010Water	Hose-A		6x8x510(mm) 1
82 310011Hose	Connector 2
83 310012Water	Hose-B		6x8x35(mm) 1
84 310013Water	Hose-C		6x8x40(mm) 1
85 310014Seal 1
86 310105Brand...

32
SERVICES AND WARRANTY INFORMATION
   LOANER PROGRAM
Loaner	 tools	 can	 be	 issued	 to	 temporarily	 replace	 a	 tool	 that	 is	 being	 returned	 to	
Alpha®	for	repair.		If	more	than	one	tool	is	being	returned	for	repair,	the	number	of	
loaner	tools	provided	will	be	based	on	availability.		
If	a	 loaner	 tool	is	required,	 contact	Alpha
®	Tool	 Department	 at	(800)	 648-7229	 to	receive 	
a	 Loaner	 Tool	Application.		 A	valid	 credit	 card	number	 must	be	provided	 as	a	security 	
deposit.		The...

i
APPENDIX	A
	FREQUENTLY	ASKED	QUESTIONS
Q.	 What	applications	is	the	Alpha®	WDP-120	recommended	for?
A.	 The	Alpha®	WDP-120	is	recommended	for	wet	or	dry	polishing.
Q.	 What	is	the	warranty	for	this	WDP-120?
A.	 Alpha	Professional	Tools
®		warranties	the	WDP-120	against	defects	in	material	
and	 workmanship	 for	a	period	 of	180	 days	 from	the	date	 of	original	 retail	purchase 	
(proof	 of	 purchase	 required).	 Please	 complete	 the	 warranty	 registration	 card	
upon	receipt	and	mail	immediately	for...

ii
Q.	 Can	I	use	my	WDP-120	as	a	wet	cutting	tool	with	a	diamond	blade?
A.	 No.	The	WDP-120	only	has	a	2,800	no	load	RPM	rating.	This	is	not	enough	RPM	for	cutting	applications	with	a	diamond	blade.	It	is	unsafe	to	use	the	WDP-120	
as	a	cutting	tool.		Do	not	attempt	to	cut	with	the	WDP-120.
Q.	 Can	I	use	my	WDP-120	for	dry	polishing	applications?
A.	 Yes.	 The	WDP-120	 is	designed	 for	wet	 and	 dry	applications.		 Alpha
®	recommends 	
using	our	HEPA	Vacuum	for	dry	polishing	applications.
Q.	 How	can	I...

PRODUCT REGISTRATION CARD
Model No.                 Serial No.
Company	Name:	______________________________________________
Name:	______________________________________________________
Address:	____________________________________________________
City:	_______________________State:	________Zip:	________________
Telephone:	___________________________________________________
Purchase	Date:	_______________________________________________
Dealer’s Name: _________________________________ Note:		Serial	&	Model...

Copyright © 2013 Alpha Professional Tools. All rights reserved. 
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
Assembled	in	China Revised: 12/2013