Alpha Tool.Com.HK Limited Polisher WDP120 User Manual

Model No.:  WDP-120Version 3
Alpha® Wet/Dr y Polisher
Instruction Manual
MANUAL
103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-0114 www.alpha-tools.com
WARNING:  To reduce the risk of injury, user must read and understand instruction manual! 

2
TABLE OF CONTENTS
WDP-120 Overview ........................................................................\
............................3
Specifications ........................................................................\
....................................3  
	 Accessories ........................................................................\
.............................4
	 Attachment	-	Guard ........................................................................\
.................5...

3
WDP-120 OVERVIEW
  SPECIFICATIONS
Rating ........................................................................\
.... 120 V
Amperage ......................................................................7A  
Wattage ........................................................................\
.. 800W
Speed	(Variable) ........................................................... 500~2800	RPM
Weight ........................................................................\
. 	 7.3	Lbs	/	3.3kg
Spindle...

4
 ACCESSORIES 

5
 ATTACHMENT-	GUARD
Connector Main	Unit
Sub	Cover
Half	Cover
COMPONENTS:
1. 
Main	Unit
2.  Connector
3.  Half	Cover
4.  Sub	Cover
Figure-3 

6
INTRODUCTION
Thank	you	for	purchasing	the	Alpha®	Wet/Dry	Concrete	Polisher.		Please	read	this	
instruction	 manual	thoroughly	 to	ensure	 safety	and	correct	 use	of	the	 polisher.		 Keep	
this	manual	in	a	place	where	operators	can	access	it	easily	whenever	necessary.
	ABOUT	THE	SYMBOLS
According	 to	 the	 hazard	 level,	 all	 safety	 notes	 in	 this	 manual	 are	 classified	 into	
“DANGER”,		“WARNING”,	and	“CAUTION”.
		DANGER!	 Death	 or	 serious	 personal	 injury	 is	 imminent	 when	 handling	 this...

7
  CAUTION!
The	following	are	important	notes	for	products,	operation,	and	maintenance	appli-
cable	to	this	polisher.
GENERAL	SAFETY	RULES
	WORK	AREA
•	 Keep	your	work	area	clean	and	well	lit.		 Cluttered	benches	and	dark	areas	invite	
accidents.
•	 Do	not	operate	power	tools	in	explosive	atmospheres,	such	as	in	the	presence	 of	flammable	liquids,	gases,	or	dust.		Power	tools	may	create	sparks	which	may	
ignite	the	dust	or	fumes.
•	 Keep	 bystanders,	 children,	and	visitors	 away	while	 operating	 a...

8
tools	with	your	 finger	 on	the	 switch	 or	plugging	 in	tools	 that	have	 the	switch	 on,	
invites	 accidents.
•	 Remove	adjusting	keys	or	wrenches	before	turning	the	tool	on.			 A	wrench	or	a	
key	 that	 is	left	 attached	 to	a	rotating	 part	of	the	 tool	 may	 result	 in	personal	 injury.
•	 Do	not	overreach.		Keep	proper	footing	and	balance	at	all	times.		 Proper	footing	
and	balance	enables	better	control	of	the	tool	in	unexpected	situations.		Do	not	
use	on	a	ladder	or	unstable	support.
•	 Use...

9
	SPECIFIC	SAFETY	RULES
•	Accessories	 must	be	 rated 	for	 at	least 	the 	speed	 recommended	 on	the 	tool	
warning	label.		 Wheels	and	other	accessories	running	over	rated	speed	can	fly	
apart	and	cause	injury.
•	 Hold	tool	by	insulated	gripping	surfaces	when	performing	an	operation	where	 the	cutting	tool	may	contact	hidden	wiring	or	its	own	cord.		Contact	with	a	“live”	
wire	will	make	exposed	metal	parts	of	the	tool	“live”	and	shock	the	operator.
•	 Know	your	power	tool.		 Read	operator`s	manual...

10
		USE	PROPER	EXTENSION	CORDS
Use	only	 three-wire	 extension	cords	that	have	 three-prong	 grounding-type	 plugs	and	
three-pole	receptacles	that	accept	the	tool’s	plug.		Make	sure	your	extension	cord	
is	in	good	condition.		 Replace	or	repair	damaged	or	worn	cord	immediately.		 When	
using	an	extension	cord,	be	sure	to	use	one	heavy	enough	to	carry	the	current	your	
product	will	draw.		 An	undersized	cord	will	cause	a	drop	in	line	voltage	resulting	in	
loss	of	power	and	overheating.		 Below	table...