Alpha Tool.Com.HK Limited Ecoguard Type M User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type M User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 2
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications...](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-1.png "Page 2
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications...")
![Page 3
3
INTRODUCTION
Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To
ensure correct use, read this Instruction Manual and the Instruction Man\
ual
for the power tool and follow the operating instructions. Keep this man\
ual
in a place where operators can access it easily whenever necessary!
aBOUT ThE SyMBOlS
According to the hazard level, all safety notes in this manual are classified
into “DaNGER”, “W aRNING”, and “CaUTION”.
DaNGER! Death or serious personal...](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-2.png "Page 3
3
INTRODUCTION
Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To
ensure correct use, read this Instruction Manual and the Instruction Man\
ual
for the power tool and follow the operating instructions. Keep this man\
ual
in a place where operators can access it easily whenever necessary!
aBOUT ThE SyMBOlS
According to the hazard level, all safety notes in this manual are classified
into “DaNGER”, “W aRNING”, and “CaUTION”.
DaNGER! Death or serious personal...")
![Page 4
4
ECOGUaRD TyPE M OVERVIEW
SPECIfICaTIONS
Model Code ........................................................................\
............................. ECOGRDSB
attachable Blade ........................................................................\
................. 7/8” (22.23mm)
Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades
Cutting Depth ........................................................................\
................................... 1-5/16”
(Do Not Cut the thick...](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-3.png "Page 4
4
ECOGUaRD TyPE M OVERVIEW
SPECIfICaTIONS
Model Code ........................................................................\
............................. ECOGRDSB
attachable Blade ........................................................................\
................. 7/8” (22.23mm)
Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades
Cutting Depth ........................................................................\
................................... 1-5/16”
(Do Not Cut the thick...")
![Page 5
5
figure-2
aCCESSORIES
COMPONENTS
1. additional Connector assembly for Most 5” Grinders ............................3pcs
2. Collar ........................................................................\
............................. 2 pcs
3. flange & lock Nut Set ........................................................................\
.. 1 Set
4. Spacers ........................................................................\
......................... 2 pcs
5. Side Plates & Washer Set...](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-4.png "Page 5
5
figure-2
aCCESSORIES
COMPONENTS
1. additional Connector assembly for Most 5” Grinders ............................3pcs
2. Collar ........................................................................\
............................. 2 pcs
3. flange & lock Nut Set ........................................................................\
.. 1 Set
4. Spacers ........................................................................\
......................... 2 pcs
5. Side Plates & Washer Set...")
![Page 8
8
WaRNING!
1. Be sure to turn off the variable-speed angle grinder and remove the
plug from the electrical outlet before attaching and installing the Spark
Protection Cover.
2. Make sure the Spark Protection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Spark Protection Cover to a variable-speed angle
grinder but the connector is loose and can not be securely attached, do \
not
use the Spark Protection Cover. Using it in this state...](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-7.png "Page 8
8
WaRNING!
1. Be sure to turn off the variable-speed angle grinder and remove the
plug from the electrical outlet before attaching and installing the Spark
Protection Cover.
2. Make sure the Spark Protection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Spark Protection Cover to a variable-speed angle
grinder but the connector is loose and can not be securely attached, do \
not
use the Spark Protection Cover. Using it in this state...")
![Page 9
9
REPlaCEMENT Of ThE SIDE PROTECTOR a & B
WaRNING!
Be sure to remove plastic covers and replace with Side Plates a and B (Part
no.
500063 & 500064) before use.
Step 1
Step 2
figure-5
figure-6
500020 500059 500060
500064
500063
500020
Remove Plastic Covers
Side Protectors Install [i] [k] Side Plates
by [m] M4 Screws
instead of Plastic Covers.
[m]
[i] [k]
[m]](http://img.usermanuals.tech/thumb/326/5199/w64_ecoguard-type-m-user-manual-1478735641_d-8.png "Page 9
9
REPlaCEMENT Of ThE SIDE PROTECTOR a & B
WaRNING!
Be sure to remove plastic covers and replace with Side Plates a and B (Part
no.
500063 & 500064) before use.
Step 1
Step 2
figure-5
figure-6
500020 500059 500060
500064
500063
500020
Remove Plastic Covers
Side Protectors Install [i] [k] Side Plates
by [m] M4 Screws
instead of Plastic Covers.
[m]
[i] [k]
[m]")
Part No: ECOGRDSB Version 1 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com Alpha® Ecoguard Type M Spark Protection Cover Instruction Manual MANUAL (*Shown with angle grinder / sold separately)
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications ........................................................................\
...................... 4
accessories ........................................................................\
........................ 5
Components ........................................................................\
........................ 5
attachable Grinders ........................................................................\
.................. 6
Ecoguard Type M Spacers and Connectors ..................................................... 7
Installation Of The Spark Protection Cover ......................................................8
Installing To alpha
® Or Makita® Variable-Speed angle Grinder ................... 8
Replacement of the Side Protectors a and B ................................................... 9
Installing The Connector ........................................................................\
......... 10
Installation Of Blade ........................................................................\
................ 11
Cutting application ........................................................................\
.................. 13
alpha
® Ecoguard Type M Parts list ................................................................ 14
alpha
® Ecoguard Type M Schematic .............................................................. 15
3 INTRODUCTION Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To ensure correct use, read this Instruction Manual and the Instruction Man\ ual for the power tool and follow the operating instructions. Keep this man\ ual in a place where operators can access it easily whenever necessary! aBOUT ThE SyMBOlS According to the hazard level, all safety notes in this manual are classified into “DaNGER”, “W aRNING”, and “CaUTION”. DaNGER! Death or serious personal injury is imminent when handling this polisher incorrectly. WaRNING! There is a possibility of death or serious personal injury when handling this polisher incorrectly. CaUTION! There is a possibility of personal injury or property damage when handling this polisher incorrectly. Note: In some situations, failing to observe W aRNING notes could result in death or serious personal injury. Be sure to read and observe the safety notes to ensure safety and correct use of the polisher. PREC aUTIONS fOR USING SP aRK PROTECTION COVER 1. The Spark Protection Cover is for use with a 4.5” (115mm), 5” (125mm) or 6” (150mm) variable-speed angle grinder. 2. The Spark Protection Cover is designed for metal cutting of ferrous materials such as metal studs, pipe, cast iron and angle iron. 3. Be sure to wear protective goggles, dust mask, protective footwear, earplugs and other protective equipment when working. 4. Confirm that Blade does not touch inside of the Spark Protection Cover . 5. Keep Spark Protection Cover away from gasoline, thinner, petroleum and paraffin. 6. always check the Spark Protection Cover for damage, cracks or deformation before starting work. Do not use the Spark Collection Cover if it is damaged, cracked or bent as this could cause to injury. 7. The capacity of max. rotating speed of the blade must be higher than that of the Grinder. 8. The supplied connector may not connect securely to every variable- speed angle grinder. In this case, do not use the Spark Protection Cover.
4 ECOGUaRD TyPE M OVERVIEW SPECIfICaTIONS Model Code ........................................................................\ ............................. ECOGRDSB attachable Blade ........................................................................\ ................. 7/8” (22.23mm) Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades Cutting Depth ........................................................................\ ................................... 1-5/16” (Do Not Cut the thick material exceeding the capacity of the Grinder) Weight ........................................................................\ .................. 1.7lbs / 780g (Main Unit) attachable Grinders ..................................................... SEE CHART ON PAGE 6 figure-1 Safety Guard assembly Protector assembly
5 figure-2 aCCESSORIES COMPONENTS 1. additional Connector assembly for Most 5” Grinders ............................3pcs 2. Collar ........................................................................\ ............................. 2 pcs 3. flange & lock Nut Set ........................................................................\ .. 1 Set 4. Spacers ........................................................................\ ......................... 2 pcs 5. Side Plates & Washer Set ..................................................................... 1 Set 6. Pin Wrench ........................................................................\ ..................... 1 pc 7. hex. Wrench ........................................................................\ ................... 1 pc
6 aTT aChaBlE GRINDERS GRINDER SIZEMODEl alPha ®5” hSG-125 MaKIT a4-1/2” Ga4530 Ga4534 9564CV 9564PC 9557NB9557PB 5” Ga5010Z Ga5020 Ga5020y 9558PB 9565CV 9565PC 6” Ga6020 Ga6010Z 9566CV 9566PC hIT aChI 4-1/2” G12Sa3 G12SE2 G12SE2P9 G12SV a G12SR3 G12SS 5” G13SC2 G13SC2P9 G13SP G13V a GRINDER SIZEMODEl BOSCh 4-1/2” 1800 1810PS 1810PSD 5” 1801 1803EVS 1811PS 1821 1821D 6” 1806E 1812PSD MET aBO 4-1/2” W8-115 W8-115 Quick W8-115 QuickProtect 5” W8-125 Quick W11-125 Quick Wa11-125 Quick WE9-125 Quick WE14-125 Plus WE14-125 VS WP8-125 QuickProtect WP11-125 QuickProtect WEP a14-125 QuickProtect 6” W11-150 Quick WE14-150 Quick WEP14-150 QuickProtect WEP a14-150 QuickProtect WP11-150 QuickProtectGRINDER SIZEMODEl DEW alT 4-1/2” D28110 D28112 D28402 4-1/2” / 5” D28065 D28114 D28115 D28131 6” D28140 D28144 MIl WaUKEE 4/1/2” 6130-33 6140-30 6146-30 6146-31 6146-33 6147-30 6147-31 6121-30 6121-31 5” 6117-30 6117-31 6117-33 6117-33D 6121-31a 6” 6124-30 6124-31 6161-30 6161-31 6161-33
7 ECOGUaRD TyPE M SPaCERS aND CONNECTORS ® ® figure-3
8 WaRNING! 1. Be sure to turn off the variable-speed angle grinder and remove the plug from the electrical outlet before attaching and installing the Spark Protection Cover. 2. Make sure the Spark Protection Cover is securely attached; otherwise it may come loose which could cause injury. 3. If you installed the Spark Protection Cover to a variable-speed angle grinder but the connector is loose and can not be securely attached, do \ not use the Spark Protection Cover. Using it in this state could cause injury. INST allING TO alPha®, MaKITa® OR MIl WaUKEE V aRIaBlE-SPEED aNGlE GRINDER 1. Dismantle the original safety guard from the variable-speed angle grinder. 2. Remove the screws from the head of the grinder. 3. Turn the grinder body to move the switch (SW) to the upper position. (Switch should not touch the workpiece) 4. Re-tighten the screws to secure. INST alla TION Of ThE SP aRK PROTECTION COVER figure-4
9 REPlaCEMENT Of ThE SIDE PROTECTOR a & B WaRNING! Be sure to remove plastic covers and replace with Side Plates a and B (Part no. 500063 & 500064) before use. Step 1 Step 2 figure-5 figure-6 500020 500059 500060 500064 500063 500020 Remove Plastic Covers Side Protectors Install [i] [k] Side Plates by [m] M4 Screws instead of Plastic Covers. [m] [i] [k] [m]
10 figure-7figure-8 INST allING ThE CONNECTOR & ThE COMBINaTION flaNGE, lOCKNUT & SPaCER 1. Choose the proper Connector for the Grinder. (See below) ALPHA® MAKITA® MILWAUKEE HITACH IBOSCH METABO DEWALT MILWAUKEE Connector & Collar FACTORY PRESET Flange Lock Nut Spacer N/A 500047/T4.0 500068 500067 500012/T5.0 WaRNING! Be sure to turn off the grinder and remove the plug from the electrical outlet before installation. 2. Open the guard of the spark protection cover and attach to the Grinder by tightening the screws on the Connector.