Alpha Tool.Com.HK Limited Ecoguard Type M User Manual
Here you can view all the pages of manual Alpha Tool.Com.HK Limited Ecoguard Type M User Manual. The Alpha Tool.Com.HK Limited manuals for Ecoguard are available online for free. You can easily download all the documents as PDF.
Page 1
Part No: ECOGRDSB Version 1 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com Alpha® Ecoguard Type M Spark Protection Cover Instruction Manual MANUAL (*Shown with angle grinder / sold separately)
Page 2
![Page 2
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications...](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-1.png "Page 2
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications...")
2
TaBlE Of CONTENTS
Introduction ........................................................................\
.......................... 3
about The Symbols ........................................................................\
.......... 3
Precautions for Using Spark Protection Cover .........................................3
Ecoguard Type M Overview ........................................................................\
..... 4
Specifications...
Page 3
![Page 3
3
INTRODUCTION
Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To
ensure correct use, read this Instruction Manual and the Instruction Man\
ual
for the power tool and follow the operating instructions. Keep this man\
ual
in a place where operators can access it easily whenever necessary!
aBOUT ThE SyMBOlS
According to the hazard level, all safety notes in this manual are classified
into “DaNGER”, “W aRNING”, and “CaUTION”.
DaNGER! Death or serious personal...](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-2.png "Page 3
3
INTRODUCTION
Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To
ensure correct use, read this Instruction Manual and the Instruction Man\
ual
for the power tool and follow the operating instructions. Keep this man\
ual
in a place where operators can access it easily whenever necessary!
aBOUT ThE SyMBOlS
According to the hazard level, all safety notes in this manual are classified
into “DaNGER”, “W aRNING”, and “CaUTION”.
DaNGER! Death or serious personal...")
3 INTRODUCTION Thank you for purchasing the alpha® Ecoguard Type M aka Spark Buster. To ensure correct use, read this Instruction Manual and the Instruction Man\ ual for the power tool and follow the operating instructions. Keep this man\ ual in a place where operators can access it easily whenever necessary! aBOUT ThE SyMBOlS According to the hazard level, all safety notes in this manual are classified into “DaNGER”, “W aRNING”, and “CaUTION”. DaNGER! Death or serious personal...
Page 4
![Page 4
4
ECOGUaRD TyPE M OVERVIEW
SPECIfICaTIONS
Model Code ........................................................................\
............................. ECOGRDSB
attachable Blade ........................................................................\
................. 7/8” (22.23mm)
Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades
Cutting Depth ........................................................................\
................................... 1-5/16”
(Do Not Cut the thick...](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-3.png "Page 4
4
ECOGUaRD TyPE M OVERVIEW
SPECIfICaTIONS
Model Code ........................................................................\
............................. ECOGRDSB
attachable Blade ........................................................................\
................. 7/8” (22.23mm)
Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades
Cutting Depth ........................................................................\
................................... 1-5/16”
(Do Not Cut the thick...")
4 ECOGUaRD TyPE M OVERVIEW SPECIfICaTIONS Model Code ........................................................................\ ............................. ECOGRDSB attachable Blade ........................................................................\ ................. 7/8” (22.23mm) Tipped Saw Blade, abrasive Cutting Wheel, Diamond Blades Cutting Depth ........................................................................\ ................................... 1-5/16” (Do Not Cut the thick...
Page 5
![Page 5
5
figure-2
aCCESSORIES
COMPONENTS
1. additional Connector assembly for Most 5” Grinders ............................3pcs
2. Collar ........................................................................\
............................. 2 pcs
3. flange & lock Nut Set ........................................................................\
.. 1 Set
4. Spacers ........................................................................\
......................... 2 pcs
5. Side Plates & Washer Set...](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-4.png "Page 5
5
figure-2
aCCESSORIES
COMPONENTS
1. additional Connector assembly for Most 5” Grinders ............................3pcs
2. Collar ........................................................................\
............................. 2 pcs
3. flange & lock Nut Set ........................................................................\
.. 1 Set
4. Spacers ........................................................................\
......................... 2 pcs
5. Side Plates & Washer Set...")
5 figure-2 aCCESSORIES COMPONENTS 1. additional Connector assembly for Most 5” Grinders ............................3pcs 2. Collar ........................................................................\ ............................. 2 pcs 3. flange & lock Nut Set ........................................................................\ .. 1 Set 4. Spacers ........................................................................\ ......................... 2 pcs 5. Side Plates & Washer Set...
Page 6
6 aTT aChaBlE GRINDERS GRINDER SIZEMODEl alPha ®5” hSG-125 MaKIT a4-1/2” Ga4530 Ga4534 9564CV 9564PC 9557NB9557PB 5” Ga5010Z Ga5020 Ga5020y 9558PB 9565CV 9565PC 6” Ga6020 Ga6010Z 9566CV 9566PC hIT aChI 4-1/2” G12Sa3 G12SE2 G12SE2P9 G12SV a G12SR3 G12SS 5” G13SC2 G13SC2P9 G13SP G13V a GRINDER SIZEMODEl BOSCh 4-1/2” 1800 1810PS 1810PSD 5” 1801 1803EVS 1811PS 1821 1821D 6” 1806E 1812PSD MET aBO 4-1/2” W8-115 W8-115 Quick W8-115 QuickProtect 5” W8-125 Quick W11-125 Quick Wa11-125 Quick WE9-125 Quick...
Page 7
7 ECOGUaRD TyPE M SPaCERS aND CONNECTORS ® ® figure-3
Page 8
![Page 8
8
WaRNING!
1. Be sure to turn off the variable-speed angle grinder and remove the
plug from the electrical outlet before attaching and installing the Spark
Protection Cover.
2. Make sure the Spark Protection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Spark Protection Cover to a variable-speed angle
grinder but the connector is loose and can not be securely attached, do \
not
use the Spark Protection Cover. Using it in this state...](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-7.png "Page 8
8
WaRNING!
1. Be sure to turn off the variable-speed angle grinder and remove the
plug from the electrical outlet before attaching and installing the Spark
Protection Cover.
2. Make sure the Spark Protection Cover is securely attached; otherwise it
may come loose which could cause injury.
3. If you installed the Spark Protection Cover to a variable-speed angle
grinder but the connector is loose and can not be securely attached, do \
not
use the Spark Protection Cover. Using it in this state...")
8 WaRNING! 1. Be sure to turn off the variable-speed angle grinder and remove the plug from the electrical outlet before attaching and installing the Spark Protection Cover. 2. Make sure the Spark Protection Cover is securely attached; otherwise it may come loose which could cause injury. 3. If you installed the Spark Protection Cover to a variable-speed angle grinder but the connector is loose and can not be securely attached, do \ not use the Spark Protection Cover. Using it in this state...
Page 9
![Page 9
9
REPlaCEMENT Of ThE SIDE PROTECTOR a & B
WaRNING!
Be sure to remove plastic covers and replace with Side Plates a and B (Part
no.
500063 & 500064) before use.
Step 1
Step 2
figure-5
figure-6
500020 500059 500060
500064
500063
500020
Remove Plastic Covers
Side Protectors Install [i] [k] Side Plates
by [m] M4 Screws
instead of Plastic Covers.
[m]
[i] [k]
[m]](http://img.usermanuals.tech/thumb/326/5199/w300_ecoguard-type-m-user-manual-1478735641_d-8.png "Page 9
9
REPlaCEMENT Of ThE SIDE PROTECTOR a & B
WaRNING!
Be sure to remove plastic covers and replace with Side Plates a and B (Part
no.
500063 & 500064) before use.
Step 1
Step 2
figure-5
figure-6
500020 500059 500060
500064
500063
500020
Remove Plastic Covers
Side Protectors Install [i] [k] Side Plates
by [m] M4 Screws
instead of Plastic Covers.
[m]
[i] [k]
[m]")
9 REPlaCEMENT Of ThE SIDE PROTECTOR a & B WaRNING! Be sure to remove plastic covers and replace with Side Plates a and B (Part no. 500063 & 500064) before use. Step 1 Step 2 figure-5 figure-6 500020 500059 500060 500064 500063 500020 Remove Plastic Covers Side Protectors Install [i] [k] Side Plates by [m] M4 Screws instead of Plastic Covers. [m] [i] [k] [m]
Page 10
10 figure-7figure-8 INST allING ThE CONNECTOR & ThE COMBINaTION flaNGE, lOCKNUT & SPaCER 1. Choose the proper Connector for the Grinder. (See below) ALPHA® MAKITA® MILWAUKEE HITACH IBOSCH METABO DEWALT MILWAUKEE Connector & Collar FACTORY PRESET Flange Lock Nut Spacer N/A 500047/T4.0 500068 500067 500012/T5.0 WaRNING! Be sure to turn off the grinder and remove the plug from the electrical outlet before installation. 2. Open the guard of the spark protection cover and attach to the Grinder by...