Home
>
Alpha Tool.Com.HK Limited
>
Ecoguard
>
Alpha Tool.Com.HK Limited Ecoguard Type G ver 2 User Manual
Alpha Tool.Com.HK Limited Ecoguard Type G ver 2 User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type G ver 2 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 6
6
if the different Connector is needed, exchange the connector as per the following \
instructions.1. loosen the Screws.
2. take the front of the Connector assembly off.
3. loosen the flat head Screws using the hex Wrench.
4. take the back of the Connector assembly off.
5. Replace with other Connector.
6. Place in the other Connector assembly.
Ecoguard type G
Screw
Connector assembly
(front)
hex-Wrench flat head Screw
Connector assembly(back)](http://img.usermanuals.tech/thumb/326/5203/w64_ecoguard-type-g-ver-2-user-manual-1478735881_d-5.png "Page 6
6
if the different Connector is needed, exchange the connector as per the following \
instructions.1. loosen the Screws.
2. take the front of the Connector assembly off.
3. loosen the flat head Screws using the hex Wrench.
4. take the back of the Connector assembly off.
5. Replace with other Connector.
6. Place in the other Connector assembly.
Ecoguard type G
Screw
Connector assembly
(front)
hex-Wrench flat head Screw
Connector assembly(back)")
11 GRiNDiNG aPPliCatiONS SuRfaCE GRiNDiNG Securely connect the flexible Connector h ose to the Dust Collection Cover. t urn Grinder and Vacuum on to start grinding application. use the alpha ® Rubber hose Connector as a joint between duct and flexible Connector hose. W all GRiNDiNG 1. loosen the screws and remove the Sub Cover and half Cover. Rubber hose Connector Duct flexible Connector hose half Cover Screw M4 x 10 Sub Cover Stainless Steel hose band
12 2. Switch the position of the Sub Cover and half Cover. 3. tighten screws. attaChiNG thE DuSt COllECt OR 1. Securely connect flexible Connector hose to the duct of the grinder, then turn Grinder and Vacuum Cleaner on to start grinding application. 2. use an adapter such as the alpha ® Rubber hose Connector as a joint between the duct and the flexible hose Connector. Rubber hose Connector Duct Stainless Steel hose band half Cover Sub Cover
13 alPha® ECOGuaRD tyPE G SChEMatiC alPha® / MaKita® CONNECtOR, SPaCERS aND flaNGE / lOCK Nut *Original indicates lock Nut included with tool.
14 *Original indicates lock Nut included with tool. # 11-a,b,c,d - Choose spacer according to Cup type. (See chart on page 10) ECOGuaRD tyPE G OthER CONNECt ORS aND SPaCERS
15 alPha® ECOGuaRD tyPE G PaRtS liSt DRa WiNG NO. PaR t NO. DESCRiPtiON QuaNtity 1 500032 Main Cover 1 2 500033 Sub Cover 1 3 500034 half Cover 1 4 500005 Rubber hose adapter 1 5 500006 Stainless Steel hose band 1 6 500037 Screw M4x10 4 7 500038 Set Plate 1 8 500039 holder Spring 4 9 500020 flat head Screw M4x5 3 10a 500028 Connector assembly (alpha ®/Makita®)1 10b 500003 Connector assembly (hitachi) 1 10c 500004 Connector assembly (Metabo ®/bosch /Dewalt) 1 11 a 500011 Spacer / t2.5 1 11 b 500012 Spacer / t5.0 1 11 c 500013 Spacer / t7.0 1 11 d 500014 Spacer / t9.4 1 12a 500029 base flange 1 12b 500007 inner flange 1 13 500022 Collar M (Metabo) 1 14 500035 Collar D (Dewalt) 1 16 500008 lock Nut 1 17 500024 hex. Wrench 1 18 210105 Pin Wrench 1 19 500036 Seal 1 20 500040 brand label 1 21 500041 brush (a) 1 22 500042 brush (b) 1 23 500021 taper Washer 3 Optional accessory: Shown on pg 4 500026flexible Connector hose 18” 1
Copyright © 2012 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com 04/2012