Alpha Tool.Com.HK Limited Ecoguard Type C User Manual
Have a look at the manual Alpha Tool.Com.HK Limited Ecoguard Type C User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 67 Alpha Tool.Com.HK Limited manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 7
7
INSTalla TION Of THE DuST COllECTION COVER
WaRNING!
1. be sure to turn off the high-speed angle grinder and remove the plug
from the electrical outlet before attaching and installing the Dust
Collection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise
it may come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder\
but the connector is loose and can not be securely attached, do not
use the Dust Collection...](http://img.usermanuals.tech/thumb/326/5198/w64_ecoguard-type-c-user-manual-1478735581_d-6.png "Page 7
7
INSTalla TION Of THE DuST COllECTION COVER
WaRNING!
1. be sure to turn off the high-speed angle grinder and remove the plug
from the electrical outlet before attaching and installing the Dust
Collection Cover.
2. Make sure the Dust Collection Cover is securely attached; otherwise
it may come loose which could cause injury.
3. If you installed the Dust Collection Cover to a high-speed angle grinder\
but the connector is loose and can not be securely attached, do not
use the Dust Collection...")
![Page 8
8
INSTallING TO OTHER HIGH-SPEED aNGlE GRINDERS WITH
INCluDED OTHER CONNECTORS
If you install the Dust Collection Cover to a high-speed angle grinder \
but
the connector is loose and cannot be securely attached, it may be necess\
ary
to change the connector designed for other makes.
1. Remove the three screws in the connector attached to the Dust
Collection Cover. (fig. 3)
2. attach the supplied connector by following the instruction in (1) above\
in reverse. (for Hitachi Grinder use Part No:...](http://img.usermanuals.tech/thumb/326/5198/w64_ecoguard-type-c-user-manual-1478735581_d-7.png "Page 8
8
INSTallING TO OTHER HIGH-SPEED aNGlE GRINDERS WITH
INCluDED OTHER CONNECTORS
If you install the Dust Collection Cover to a high-speed angle grinder \
but
the connector is loose and cannot be securely attached, it may be necess\
ary
to change the connector designed for other makes.
1. Remove the three screws in the connector attached to the Dust
Collection Cover. (fig. 3)
2. attach the supplied connector by following the instruction in (1) above\
in reverse. (for Hitachi Grinder use Part No:...")
![Page 12
12
foot Plate
Screw
bottom Plate
Knob bolt
aTTaCHING THE DuST COllECTION COVER TO THE fOOT Pla TE
1. attach the diamond blade to the grinder before installing the foot plate.\
2. loosen the Knob bolt.
(fig.15)](http://img.usermanuals.tech/thumb/326/5198/w64_ecoguard-type-c-user-manual-1478735581_d-11.png "Page 12
12
foot Plate
Screw
bottom Plate
Knob bolt
aTTaCHING THE DuST COllECTION COVER TO THE fOOT Pla TE
1. attach the diamond blade to the grinder before installing the foot plate.\
2. loosen the Knob bolt.
(fig.15)")
11 flexible Connector Hose* (*sold separately)Stainless Steel Hose band Rubber Hose adapter aTTaCHING THE bOTTOM Pla TE TO THE fOOT PlaTE 1. Remove protective tape to expose adhesive side on the bottom Plate. 2. align holes with holes on foot plate 3. Press firmly to securely attach (fig.14) bottom Plate foot Plate a TT aCHING THE DuST COllECTOR attach the Dust Collection Cover to a hose. (fig. 10) *The hose opening of the Dust Collection Cover has an outside diameter of 34mm. If necessary, use the Rubber Hose adapter and Stainless Hose band sup- plied with the Dust Collection Cover. (fig.13)
12 foot Plate Screw bottom Plate Knob bolt aTTaCHING THE DuST COllECTION COVER TO THE fOOT Pla TE 1. attach the diamond blade to the grinder before installing the foot plate.\ 2. loosen the Knob bolt. (fig.15)
13 Guide bar 3. align the foot plate with the holes on the dust collection cover. at- tach with the supplied screws. 4. Tighten the Knob bolt. CuTTING aPPlICaTION uSING THE fOOT Pla TE 1. for stable operation, it is recommended to use the foot plate. 2. for straight cutting, run the foot plate parallel to the guide bars, as shown in figure 13. (fig.16) (fig.17)
15 alPHa® ECOGuaRD TyPE C P aRTS lIST DRaWING NO. PaRT NO. DESCRIPTION QuaNTITy 1 500043Cover assembly 1 2 500044base 1 3 500045base Plate 1 4a 500002Connector assembly (alpha ® / Makita®/ Milwaukee) 1 4b 500003Connector assembly (Hitachi) 1 4c 500004Connector assembly (Metabo ® / bosch) 1 5 500005Hose adapter 1 6 500006Stainless Steel Hose band 1 7 500046base flange (5/8”-11) 1 8 -lock Nut (Original) - 9a 500047Spacer-T4.0 (alpha ® / bosch) 1 9b 500012Spacer-T5.0 (Makita ® / Milwaukee) 1 9c 500048Spacer-T7.2 (Hitachi) 1 9d 500023Spacer-T8.6 (Metabo ®) 1 10 500049Knob bolt (M5/White) 2 11 500028Shaft 1 12 500017Screw M5x10 2 13 500018Spring Washer 2 14 500019Washer 1 15 500052Screw M4x5 3 16 500021Taper Washer 3 17 500051brand label 1 18 500022Collar M (Metabo ®) 1 19 500031foot Plate 1 20 500030bottom Plate 1 21 500050flat Head Screw M4x10 2 22 500007Inner flange 1 23 500008lock Nut 1 24 201549Dust bag 1 26 210105Pin Wrench 1 Optional accessory: Shown on pg 10 500026flexible Connector Hose 18” 1
Copyright © 2013 Alpha Professional Tools. All rights reserved. 103 Bauer Drive, Oakland, NJ 07436 • 800-648-7229 • Fax: 800-286-01 14 www.alpha-tools.com 12/2013